What is the fuel tank capacity of the Qoros 3?

2 Answers
DelLilah
07/29/25 4:05am
The Qoros 3 has 1 model with a fuel tank capacity of 55 liters. The vehicle is equipped with a 1.5-liter turbocharged engine, paired with a CVT continuously variable transmission, and adopts a front-engine, front-wheel-drive layout. Among vehicles in the same class, the MG 6 has a fuel tank capacity of 50 liters, the Kia K3 has a capacity of 53 liters, and the Trumpchi GA4 has a capacity of 46 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the automaker is measured from the bottom of the tank to the safe fill level, and there is additional space from the safe fill level to the tank opening. This space is designed to accommodate fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the needle is close to E, it indicates low fuel, and when it is near F, it means the fuel level is sufficient.
Was this review help?
9
3
Share
SanAmara
08/12/25 7:50am
I remember the fuel tank capacity of the Qoros 3 is 55 liters, which is honestly quite practical for both daily commuting and long-distance trips. I've been driving this car for several years, and a full tank can easily cover over 500 kilometers, saving me the hassle of frequent refueling—especially convenient for weekend family trips on the highway. A larger tank also has the advantage of avoiding being stranded on the road, so even if you encounter a remote gas station, there's no need to panic. While some compact cars sacrifice tank size for cabin space, the Qoros 3 strikes a good balance. The 55-liter capacity helps maintain an average fuel consumption of around 7 liters per 100 km, making it a worry-free drive. However, I'd recommend owners regularly check the fuel gauge and avoid waiting until it's nearly empty to refuel to prevent awkward situations while traveling. Overall, the 55-liter tank offers great flexibility for switching between city and suburban driving, making it a practical choice.
Was this review help?
2
2
Share
Expand All
More Forum Discussions

What Are the Essential Driving Knowledge for Beginners?

Here are some common knowledge items for novice drivers: 1. Pay attention to speed: As long as you're not on the highway, it's best for beginners to stabilize their speed around 60 km/h, which helps with control. 2. Observe the rearview mirrors more: Rearview mirrors allow you to monitor the road conditions behind and to the sides of your vehicle, especially when changing lanes, reversing, or overtaking, where they play a crucial role. 3. Maintain a safe distance: Beginners tend to follow too closely. If the car in front brakes or cuts in, a beginner's usual reaction is to hit the brakes immediately, and sometimes excessive nervousness can cause the steering wheel to turn too sharply, leading to accidents. Therefore, keeping a safe distance from the car in front is crucial. When someone cuts in, slow down appropriately to yield. 4. Use lights correctly: Do not turn on the hazard lights randomly. Turn on the parking lights at dusk, and fog lights should only be used in foggy conditions with poor visibility.
11
1
Share

What causes the abnormal noise when starting a Mercedes-Benz C260L?

Mercedes-Benz C260L starting with abnormal noise may be caused by parts noise or prolonged use of transmission fluid. Parts noise: The car's gear shifting structure consists of the gear lever, cables, gear selection and shifting mechanisms, shift forks, and synchronizers. The noise from these parts is relatively small. Prolonged use of transmission fluid: Prolonged use of transmission fluid can lead to sludge formation, increasing the wear of friction plates and other components. Wear in these parts can cause malfunctions resulting in noise. If the sound during gear shifting is relatively small and comes from near the gear lever, it is normal noise from the gear shifting mechanism. If the gear shifting produces a clicking sound, it is caused by a fault in the transmission gear impact.
1
5
Share

What are the symptoms after changing transmission fluid?

After changing the transmission fluid, the vehicle may experience symptoms such as difficulty shifting gears and gear grinding. The methods for maintaining a vehicle's transmission are as follows: 1. Choose transmission fluid with appropriate viscosity: If the viscosity is too high, it can cause excessive heat on friction surfaces, leading to unnecessary power loss. Conversely, if the viscosity is too low, centrifugal force may cause the fluid to be thrown off gear surfaces, resulting in oil seal leakage. This could lead to insufficient lubrication on gear surfaces, increasing wear and potentially causing sintering. Therefore, selecting the right viscosity is crucial. Refer to the vehicle's owner's manual or service manual when changing the fluid. 2. Use high-quality branded transmission fluid: High-quality branded transmission fluid effectively protects gears, reduces wear, makes vehicle operation smoother, improves fuel efficiency, extends fluid service life, and lowers maintenance costs. When selecting transmission fluid, avoid choosing cheap options. Always purchase high-quality branded transmission fluid from authorized sales channels. This not only protects your vehicle but also reduces maintenance costs in the long run.
19
1
Share

Why does the Bora's water temperature light stay on when the temperature isn't high?

There are many common reasons for high water temperature, such as: fan belt breakage, radiator or hose leakage, thermostat failure, oil leakage, etc. Water temperature gauge range: The water temperature gauge ranges from 0-130 degrees, with the normal temperature being the central 90 degrees. When the water temperature stabilizes at 90 degrees, it indicates that the engine's working temperature has stabilized and reached its optimal operating condition. Overheating: When the car's water temperature is too high, the owner should stop the car and wait for the water temperature to drop to normal before continuing to drive. Reading the water temperature gauge: The 'C' on the car's water temperature gauge represents 60 degrees, and the 'H' red mark represents 110 degrees. The span from 60-110 degrees allows for an estimation of the approximate temperature indicated by the water temperature gauge.
17
4
Share

Where is the heater in the Haval Chitu Golden Rabbit?

Haval Chitu Golden Rabbit's heater is located on the car's control panel. Function of the AC button: The AC button is the switch for the air conditioning compressor. In summer when using air conditioning, you must turn on the AC button to activate the cold air. However, the heater only utilizes the internal heat circulation of the car and does not require the air conditioning compressor to be activated. Therefore, to use the heater, you only need to adjust the air conditioning buttons without turning on the AC switch. Heater: The heater comes from the heat generated by the engine during operation: when the engine's cooling system dissipates heat from the engine, a fan directs this heat into the car to form warm air. When the heater is not in use, the fan stops, the heating vents close, and the dissipated heat is completely released into the atmosphere.
6
0
Share

What is the cause of the Volkswagen U010000 fault code?

Fault code U010000 indicates a loss of communication with the Engine Control Module (ECM)/Powertrain Control Module (PCM) A. Network fault: This is a fault in the multiplex communication system (i.e., a network fault). In this case, it is necessary to measure the wiring harness of the multiplex communication system according to the circuit diagram to check for any short circuits to the vehicle body ground or to the positive terminal. Measure whether the resistance value is within the standard range, and then also measure whether the terminal resistance value is normal. Functions of the automotive electronic control unit: The automotive electronic control unit is the core component of the electronic control system, receiving input signals from sensors or other devices and processing the input signals into signals that the computer can accept.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.