···
Log in / Register

How many points are deducted for making a U-turn over double yellow lines?

6Answers
TheoDella
07/28/2025, 10:13:56 PM

According to Article 26 of the Road Traffic Safety Law, violators who make a U-turn over double solid lines will be fined 200 yuan and receive 3 demerit points. Generally, on long roads, there are usually white solid lines in the middle section or before intersections. If there are yellow dashed lines or white dashed lines, U-turns are allowed. However, U-turns are strictly prohibited over any solid lines, so drivers should observe carefully before making a U-turn. Permissible U-turn situations: Intersections with U-turn signs: If there is a clear U-turn sign at an intersection, U-turns are allowed. If there is a U-turn traffic light, drivers must follow its instructions. If there is no traffic light, U-turns can be made based on the specific situation, provided they do not obstruct other vehicles or pedestrians. Intersections without explicit no-U-turn or no-left-turn signs: If there are no signs explicitly prohibiting U-turns, they are allowed. "No explicit prohibition" means the absence of signs like "No U-turn," "No left turn," or solid lines in the middle of the road. In such cases, U-turns can be made safely. Yellow grid lines also allow U-turns: Yellow grid lines are no-parking zones typically marked at intersections prone to congestion due to temporary stops, entrances/exits of important facilities, or other designated areas. Parking on these lines (including waiting for traffic lights) is a violation. Although vehicles cannot stop in yellow grid zones, U-turns are permitted there. As long as there are no central barriers, yellow grid lines are equivalent to "U-turn allowed." Intersections with U-turn traffic lights: This is straightforward—if there is a U-turn traffic light, drivers must wait for the green light to make a U-turn. Simultaneous no-left-turn and U-turn-allowed signs: U-turns are permitted even if left turns are prohibited. However, "No U-turn" is not the same as "No left turn." Precautions when making U-turns at intersections: Observe road markings—U-turns are strictly prohibited over solid lines under any circumstances. Drivers should continue forward to find a suitable spot. If there is a "No left turn" sign, U-turns are also prohibited at that intersection, even if there is no explicit "No U-turn" sign, because U-turns inherently involve left-turning movements. U-turns must be made from the innermost left-turn lane. If the vehicle is in the second left-turn lane, U-turns are not allowed at that intersection. U-turns must yield to straight-moving vehicles and should only be made without interfering with their normal flow. Otherwise, the U-turning driver bears full responsibility for any accidents. Near intersection stop lines, lanes usually have guiding arrows. Not all leftmost lanes have left-turn arrows—some may have straight arrows. Even without explicit "No U-turn" signs, U-turns are prohibited in such lanes. U-turns must not be made on crosswalks, as this is also a violation.

Was this review help?
115
Share
DiHarrison
08/12/2025, 08:16:23 AM

Last time we talked about this while driving, making a U-turn over double yellow lines is a very common traffic violation. In terms of penalty points, according to traffic regulations, it's a 3-point deduction, usually accompanied by a fine of 100 to 200 yuan, depending on local regulations. As an experienced driver, I've seen many nervous beginners making U-turns over double yellow lines and getting caught by traffic cameras. Double yellow lines are essentially two solid lines indicating complete separation of opposing traffic lanes, strictly prohibiting crossing, overtaking, or U-turns. Violating this rule not only results in point deductions but may also cause serious accidents, as oncoming vehicles could be approaching at high speed, especially on curves or at night. Remember, always pay attention to road markings while driving. When you encounter double yellow lines, just keep going straight until you find dashed lines or signs permitting U-turns. Safety first can save you a lot of trouble.

Was this review help?
2
Share
Expand All
OElle
10/01/2025, 11:49:29 PM

When I first started learning to drive, I almost made the mistake of making a U-turn over double yellow lines. Luckily, my friend reminded me in time. The penalty is a fixed 3-point deduction—I checked the traffic regulations, so I'm certain about that. A small fine isn't the main issue; the real danger is the high risk involved. Double yellow lines separate opposing traffic flows, and reckless U-turns can easily lead to collisions with oncoming vehicles. Now, I've developed a habit while driving: never cross solid lines, only consider dashed lines. Young drivers tend to be impulsive, but rules can't be ignored. Accumulating too many penalty points may result in a suspended license. No matter how urgent it is, it's safer to find a proper spot—wait for a traffic signal or use a designated U-turn area.

Was this review help?
14
Share
Expand All
GraceRose
11/15/2025, 12:33:01 AM

Having driven for decades, this is crystal clear: making a U-turn over double yellow lines will directly deduct 3 points, no room for negotiation. Solid lines mean prohibition, including U-turns and overtaking—violating these rules creates hazards. I never engage in such behavior; observing road signs before driving and complying is the most worry-free approach. Beyond point deductions, fines are common—everyone must uphold order.

Was this review help?
6
Share
Expand All
VonElizabeth
01/05/2026, 02:09:42 AM

I always worry about the roads where children go to and from school, how scary it would be if someone drives recklessly. Making a U-turn over double yellow lines results in a 3-point deduction, which is a traffic violation, and a fine is inevitable. Double solid yellow lines indicate road separation and should not be violated; ignoring them could lead to accidents. When driving, I keep my eyes on the road markings to avoid negligence and protect myself and others. Rules are set for safety, and point deductions remind us to correct our mistakes.

Was this review help?
12
Share
Expand All
VonOwen
04/02/2026, 01:59:22 AM

In our student group, we often discuss driving topics, and making a U-turn over double yellow lines resulting in a 3-point deduction is basic knowledge. The fine is usually around 150 yuan, depending on city regulations. Those two solid yellow lines are a clear warning: don't mess around, or the risks are high. With modern technology, electronic surveillance is strict, and you can easily get caught if you're not careful. It's recommended to rely more on navigation prompts or make U-turns at designated dashed line areas. Following the rules makes for a more worry-free and safer drive.

Was this review help?
8
Share
Expand All
More Q&A

How to Open the Q5 Trunk?

There are several methods to open the Q5 trunk: 1. Gently lift the trunk button, and the trunk lid will open; 2. Utilize the key's sensing function to directly pull the trunk switch; 3. If the button fails, you can use the key to unlock it directly. The Q5 is a mid-size SUV under FAW-Volkswagen Audi, with exterior dimensions of 4753mm in length, 1893mm in width, and 1659mm in height, and a wheelbase of 2908mm. The Q5 is equipped with a 2.0T turbocharged engine, paired with an 8-speed automatic transmission, delivering a maximum power of 169 kW and a maximum torque of 350 Nm.
120
Share

What are the differences between the new and old Citroën models?

The differences between the new and old Citroën models mainly lie in the exterior parts such as the dashboard, front and rear bumpers, hood, tailgate, and front fenders. Essentially, these are just the outer shells; the rest of the components remain the same. Turn on the ignition before starting the engine: Before starting the engine, turn on the ignition first—do not start the engine directly. When the ignition is turned on, the vehicle usually performs a self-check, during which all indicator lights will illuminate simultaneously. After the self-check is completed, the lights will turn off one by one. Once the entire process is finished, you can start the engine. This typically takes about 3 seconds. Regularly clean the dust in the engine compartment: After a period of use, the engine compartment tends to accumulate dust. It is essential for car owners to clean it regularly, as excessive dust can hinder the engine's normal heat dissipation. Severe heat dissipation issues may lead to oil leaks from the gaskets. However, since the engine compartment must never be washed with water, it is recommended to take the car to a repair shop where professionals can clean it using a high-pressure air gun. Precautions for cold starts: During a cold start, allow the engine to idle for about one and a half minutes to give it time to warm up. When starting, the engine's internal temperature has not yet reached the normal operating temperature—90 degrees on the coolant temperature gauge is considered normal. The car may shake, the engine noise might be louder, and the tachometer may read slightly higher—typically between 600 to 900 RPM. Starting under such conditions can lead to engine carbon buildup because combustion is incomplete at low temperatures.
103
Share

What to Do When Fuel Pump Pressure is Low?

Solutions for low fuel pump pressure: 1. Replace the fuel pump motor; 2. Clean the filter screen; 3. Replace the fuel pump assembly. The fuel pump is a lightweight and compact pump, available in in-line, distributor, and single-unit types. Causes of low fuel pump pressure: 1. Wear of the oil seal at the rear end of the fuel pump drive gear shaft, loose pipe joints, air in the pipeline, or insufficient fuel in the tank; 2. Wear or jamming of the fuel pump gear end face bearing, resulting in excessive axial clearance of the fuel pump gear; 3. Damage to the needle roller bearing, abnormal meshing of the fuel pump gear, or scoring of the fuel pump housing inner cavity; 4. Jamming of the fuel pump regulating valve or safety valve, insufficient spring force, or breakage.
115
Share

What is the original tire model of Wuling Hongguang?

The original tire model for the Wuling Hongguang 2010 1.2L Utility Edition, Wuling Hongguang 2010 1.2L Basic Edition, and Wuling Hongguang 2010 1.4L Utility Edition is 175/70R14, while other models use 185/65R14 tires. The Wuling Hongguang's powertrain adopts an FR (front-engine, rear-wheel-drive) layout, with a front and rear axle load distribution of 45% and 55% respectively. The body features a fully load-bearing design. The dimensions of the Wuling Hongguang 2010 model are 2100mm in length, 1400mm in width, and 1310mm in height. The luggage space can reach 1750L by simply flipping and folding the rear seats, and can be expanded to 3050L by removing the rear seats and folding the middle row seats.
120
Share

Can the 1.4T Lavida use 92-octane gasoline?

1.4T Lavida can use 92-octane gasoline, which is suitable for gasoline-powered vehicles with an engine compression ratio between 8.6 and 9.9. Characteristics of 92-octane gasoline: 1. Reduced emissions; 2. Good power performance; 3. Reduced carbon deposits; 4. Convenient to use; 5. Self-cleaning fuel system. The 1.4T Lavida is a sedan produced by SAIC Volkswagen, with exterior dimensions of 4670mm in length, 1806mm in width, and 1474mm in height, a wheelbase of 2688mm, and a body structure of a 4-door, 5-seat sedan. It is equipped with a 7-speed dual-clutch transmission and a 1.4T L4 engine, delivering a maximum torque of 150 Nm and a maximum power of 110 kW.
109
Share

Is it easy to replace the clutch slave cylinder on a Haval H6?

Easy to replace. Here are the relevant details: Location of the clutch slave cylinder: The clutch slave cylinder is located at the lower right side of the engine compartment. It is easiest to see when the vehicle is lifted. Simply remove the screws to access it. Precautions: If the clutch master cylinder, slave cylinder, or pedal adjustment is improper; if the release bearing lacks lubrication or fails, if the release bearing sleeve is stuck, if the release fork is cracked or deformed, if the transmission's first shaft is twisted, if the clutch assist slave cylinder fails, or if the assist slave cylinder rocker arm is loose, the clutch may malfunction or fail in a very short time, potentially leading to vehicle or personal accidents. Under normal usage conditions, the lifespan of the clutch is at least 50,000 kilometers for the pressure plate assembly and at least 30,000 kilometers for the driven plate assembly.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.