What is the fuel tank capacity of the old Elantra in liters?

2 Answers
DelEvangeline
09/02/25 3:41am
The fuel tank capacity of the old Elantra is 47 liters, as officially announced. Owners of the old Elantra can also check this information on the vehicle's specification sheet. The fuel grade for the Leopard Q6 is 92, with a fuel consumption of 5.3L per 100 kilometers. A full tank can cover a distance of 886km. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This space ensures that the fuel can expand when the temperature rises without overflowing the tank's safety space. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
Was this review help?
12
0
Share
Fernando
09/14/25 5:56am
I remember the fuel tanks on older Elantra models were mostly around 50 liters, depending on the specific year. For example, most common models from 2003 to 2006 had 55-liter tanks, which remained unchanged after the 2008 minor facelift. When refueling normally, you can usually fill up about 50 liters before the pump clicks off, as tank designs always leave some room for expansion. By today's standards, this capacity might not seem large, but older cars had lower fuel consumption—a 1.6L manual could cover over 600 kilometers on the highway and still manage around 400 kilometers in city traffic. Once, during a long trip in a friend's old Elantra, the low fuel light came on, and we nervously stretched it another 30 kilometers before finding a gas station.
Was this review help?
3
5
Share
Expand All
More Forum Discussions

What is the method to reset the maintenance light on the Mercedes GLK300?

Mercedes GLK300 maintenance light reset method is: 1. Turn the ignition switch to the ON position, press and hold the OK button on the left side of the steering wheel, simultaneously press the call answer or end button on the right side for 5 seconds; 2. Select 'Assist Maintenance' from the multifunction display on the instrument panel and confirm with the OK button; 3. Press the forward or backward button to select 'Service Done' and press the OK button; 4. Press the forward or backward button to select 'Service Due', confirm with the OK button, then press the forward or backward button to select 'Further Service'; 5. After completing the above steps, press the forward or backward button to select 'Full Service' and press the OK button; 6. Press the return button on the left side of the steering wheel to return to the main menu, then turn off the ignition switch.
4
1
Share

What is the transmission model used in the Tharu?

The transmission model used in the Tharu varies depending on the vehicle model: 1. The 2.0T model is equipped with a DQ381 seven-speed wet dual-clutch transmission; 2. The 1.4T model uses a DQ200 seven-speed dry dual-clutch transmission. The Tharu has a length, width, and height of 4453mm, 1841mm, and 1632mm respectively, with a wheelbase of 2680mm, a minimum ground clearance of 190mm, and a body weight of 1480kg. The 1.4T turbocharged engine has a maximum power of 110kW, a maximum torque of 250Nm, a maximum power speed of 5000rpm, and a maximum torque speed range of 1750 to 3000rpm. The 2.0T turbocharged engine has a maximum power of 137kW, a maximum torque of 320Nm, a maximum power speed range of 4100 to 6000rpm, and a maximum torque speed range of 1500 to 4000rpm.
11
0
Share

What is the wading depth of the Chevrolet Trailblazer?

The wading depth of the Trailblazer is generally 25 or 30 cm. Below is relevant information about vehicle wading depth: 1. Detailed explanation: Unprepared wading depth: Refers to the depth at which a vehicle without modifications can wade without affecting the normal operation of mechanical components, such as whether the exhaust will take in water, whether the air intake will suck in splashed water, or whether the cooling fan will be submerged in water, etc. Prepared wading depth: Refers to the wading depth of a modified vehicle, where the exhaust pipe is designed to be very high, the air intake is installed on the roof, and the cooler and fan are removed from the engine compartment, among other modifications. 2. Judging wading depth: When the water depth is one-third of the tire height, you can pass safely without unnecessary losses as long as you operate correctly. When the water depth exceeds half of the tire height, it can easily cause water to enter the vehicle. If the wading depth exceeds the bumper, you should be extra cautious while driving to avoid water entering the engine.
6
4
Share

Which button unlocks the trunk of a Chevrolet?

For high-end Chevrolet models, the trunk unlock button is located under the driver's door handle. For basic models, the trunk needs to be opened with a key. The location of the trunk switch varies depending on the model. Below is an introduction to opening the trunk for two types of models: Introduction to unlocking the trunk for different Chevrolet models: Chevrolet models are divided into high-end and basic models for trunk opening. For high-end models, the trunk opening switch is a button located under the driver's door handle. For basic models, the trunk needs to be opened with a key or by pressing the button next to the fuel tank cover handle under the driver's seat. Electric tailgate: The electric tailgate, also known as the electric trunk, refers to a trunk that can be opened or closed electrically or via remote control. To open the trunk, simply press the button inside the car or on the remote key, and the trunk will open automatically. To close the trunk, press the close button inside the trunk or inside the car, or use the remote key, and the trunk will close automatically.
10
2
Share

What are the steps to replace the brake light on a Cruze?

The steps to replace the brake light on a Cruze are: 1. Empty the trunk and lift the mat above the spare tire; 2. Remove the plastic panel and the felt panels on both sides below the trunk lid, and lift off the plastic panel; 3. Remove the lamp holder. When replacing the bulb, there is no need to remove the entire lamp. Simply loosen the clip and pull out the lamp holder; 4. Replace the brake light bulb. The Cruze has a length of 4666mm, width of 1807mm, height of 1460mm, a wheelbase of 2700mm, a minimum ground clearance of 130mm, and a body weight of 1310kg. The Cruze is equipped with a 2.0T inline 4-cylinder turbocharged engine, with a maximum horsepower of 184ps, maximum torque of 290nm, maximum power of 135kw, maximum power speed range of 5000 to 6500rpm, maximum torque speed range of 1350 to 4250rpm, and is paired with an 8-speed automatic transmission.
11
5
Share

What Causes a Chevrolet Fan to Keep Running?

The fan running continuously at high speed indicates that the engine is operating at high RPMs and has been in an overheated state for an extended period. The vehicle's system conducts detailed monitoring of the engine temperature. Below is relevant information about automotive cooling fans: 1. Axial Fan: An axial fan's blades propel air in the same direction as the axis. The impeller of an axial fan somewhat resembles a propeller, with most of the airflow moving parallel to the axis during operation—in other words, along the axial direction. The axial fan consumes the least power when the inlet airflow is free air at 0 static pressure, but power consumption increases as the back pressure of the airflow rises during operation. 2. Centrifugal Fan: During operation, a centrifugal fan's blades push air in a direction perpendicular to the axis (i.e., radial direction). The intake is along the axial direction, while the exhaust is perpendicular to the axis. In most cases, an axial fan can achieve the desired cooling effect. However, if the airflow needs to rotate 90 degrees for exhaust or higher air pressure is required, a centrifugal fan must be selected. Strictly speaking, blowers also fall under the category of centrifugal fans.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.