What is the fuel tank capacity of the Mazda6 Atenza in liters?

What Causes the Car Key to Get Stuck?

Generally speaking, a car key getting stuck is not a malfunction. There are two scenarios: one where the key cannot be pulled out after turning off the engine, and the other where the key cannot be turned after insertion. Below is a detailed explanation: 1. The first scenario—key stuck after turning off the engine—is common in automatic transmission models. The reason the key cannot be pulled out is that the gear shift is not fully returned to the P (Park) position, failing to trigger the electronic sensor, or there may be obstacles like coins in the gear slot preventing it from returning. In this case, the owner should check for any foreign objects in the gear slot, restart the car, and shift the gear again to ensure it is fully returned, after which the key can be removed. 2. The second scenario—key cannot be turned after insertion—is actually due to the car's automatic steering wheel lock feature, a simple anti-theft function. This usually happens when, after parking and turning off the engine, the steering wheel is accidentally turned or the wheels are not aligned properly, causing the steering wheel to lock. The steering lock pin engages with the steering column, making the steering wheel immovable. Even if the key is inserted and turned forcefully, it will not budge.

4

Share

What is the reason for the starter noise when starting the car?

The reasons for the starter noise when starting the car are: 1. Engine belt issue: Check the tightness of the engine belt. If there is a problem, it is recommended to replace it. It could also be that the belt is too dirty, and cleaning it with water or lubricating it with a lubricant can eliminate the noise; 2. Noise in the engine compartment: Open the front cover and carefully check for any foreign objects. Blockage by foreign objects can cause a buzzing noise, so it is important to develop the habit of regularly inspecting the engine compartment; 3. Slow return of the starter motor's flywheel: After the engine starts, the flywheel drives the starter motor's flywheel to operate, causing noise. If the noise is only slight, it can be ignored. If it is severe, the motor may need to be repaired or replaced.

20

2

Share

Where is the engine of the Trumpchi M8 produced?

The Trumpchi M8 uses the 4B20J1 engine model, with a maximum horsepower of 252 hp, a maximum power of 185 KW, a maximum power speed of 5250 rpm, and a peak torque of 390 N.m. The engine of the GAC Trumpchi M8 is domestically produced. It is the third-generation 390T (2.0T turbocharged) engine from GAC Group and is manufactured at GAC Trumpchi's engine production base. For daily maintenance of the Trumpchi M8 engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust system and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil based on mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid failures, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through, it may rupture the filter or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while large amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

11

4

Share

What Lights Should Be Turned On When Temporarily Parking a Vehicle in the Rain?

When temporarily parking a vehicle in the rain, the hazard warning flashers should be turned on. The official term for the hazard lights is hazard warning lights, which are generally used when the vehicle experiences a malfunction, is in danger, or needs to temporarily stop on a main road. There are four situations where the hazard warning flashers should be activated: 1) When the vehicle malfunctions during road travel and cannot be moved to a safe area promptly, the hazard warning flashers should be turned on to alert passing vehicles and pedestrians for safety; 2) If a breakdown occurs on the highway, the vehicle should stop within the emergency parking lane, immediately turn on the hazard warning flashers, place a warning sign 150 meters behind the vehicle, and quickly call for help. The driver and passengers should wait for rescue outside the front guardrail of the vehicle; 3) When towing a malfunctioning vehicle, both the towing vehicle and the towed vehicle should activate the hazard warning flashers simultaneously to alert passing vehicles and pedestrians; 4) When transporting a critically ill patient, the headlights should be turned on immediately along with the hazard warning flashers, and the horn should be sounded appropriately. A clearly visible special sign should be displayed outside the vehicle to alert passing vehicles and pedestrians for safety. As required, when driving at night without streetlights, under poor lighting conditions, or in low visibility situations such as fog, rain, snow, dust, or hail, vehicles should turn on the headlights, position lights, and rear lights. However, high beams should not be used when driving close to the vehicle in front in the same direction. Vehicles driving in foggy conditions should turn on the fog lights and hazard warning flashers.

3

4

Share

What is the battery model for the Volkswagen Touareg remote key?

The battery model is CR2032. It is a lithium manganese dioxide battery, named according to IEC standards. Among them: C- indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode; R- indicates that the battery shape is cylindrical, and if it is square, F is used instead; 20 indicates that the battery diameter is 20mm; 32 indicates that the battery height is 3.2mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity is approximately 200mAh. The CR2032 typically has a lifespan of 5 years. If the manufacturer's production level is not high or quality control is poor, its lifespan will be significantly shortened. Domestic first-tier brand batteries can generally guarantee this lifespan. If the usage environment is ideal (sealed, room temperature, no moisture, etc.), the lifespan can be further extended to 8 years or even 10 years. The usage time of the vehicle remote key battery is closely related to the frequency of use. The more frequently it is used, the shorter the usage time will be. If the remote key battery runs out of power, the mechanical key can be used directly to open and start the vehicle. The batteries used in car remote keys are button batteries, mainly including models such as CR2016, CR2025, CR2032, and CR2450. For the specific model used in each key, the owner can refer to the battery model in the user manual for replacement. Button-type CR2016 battery: The usage rate of car key remotes is very high, making it one of the most common car remote batteries. The voltage of this battery is 3V, while most car key batteries are powered by 9V, so all three batteries need to be replaced each time. Examples include Honda, Toyota, Volkswagen, Mazda, etc. CR2016 specifications: battery diameter 20mm, thickness 1.6mm. Button-type CR2025 battery: Its usage rate is much lower than that of CR2016. However, it is still used in some car keys. It is thicker than the 2016 model but has a relatively higher storage capacity. CR2025 specifications: battery diameter 20mm, thickness 2.5mm. This type of battery is also commonly used in audio remotes. Button battery CR203

2

5

Share

What does oilchange mean when it appears on a car?

oil-change means oil change. The "oil-change" indicator usually appears on the car's dashboard. When the OIL-CHANGE light comes on, it means that the engine oil and lubricating oil should be replaced as soon as possible, which is a maintenance reminder for the vehicle. This indicator light is specifically used to record the mileage and time the car has traveled since the last maintenance. When the mileage and time reach the set value, this indicator light will turn on. The elimination method is as follows: When the power is off, that is, the screen is black and the car is completely powered off, press and hold the SEL button with your left index finger for 5 seconds without releasing it. Then, start the power with your right hand to light up the dashboard, and continue holding the SEL button with your left index finger for another 3 seconds. The OIL-CHANGE indicator light will then disappear. If the oil warning light comes on while driving, it indicates that the oil level is insufficient, and the car should not continue to be driven. Engine oil plays a significant role in lubricating the engine's operation. Insufficient oil will lead to inadequate engine lubrication, increasing engine wear. Additionally, the engine's cooling function may not work properly, causing the engine to overheat. Over time, the engine may even be damaged, which poses a significant danger to the occupants of the car. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The latter number represents the oil's kinematic viscosity at 100°C. A higher number means the oil can maintain its viscosity index better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. When selecting engine oil, the following points should be noted: Choose engine oil based on the engine's requirements. It is unnecessary to use overly advanced oil in engines with lower requirements, nor should lower-grade oil be used in engines with higher requirements. Multi-grade oil should be preferred. Multi-grade oil is economical, long-lasting, and efficient, providing better protection for the engine. Due to the characteristics of multi-grade oil, it may appear darker prematurely and have lower oil pressure compared to regular oil, both of which are normal.

13

4

Share

What is the fuel tank capacity of the Mazda6 Atenza in liters?

What Causes the Car Key to Get Stuck?

What is the reason for the starter noise when starting the car?

Where is the engine of the Trumpchi M8 produced?

What Lights Should Be Turned On When Temporarily Parking a Vehicle in the Rain?

What is the battery model for the Volkswagen Touareg remote key?

What does oilchange mean when it appears on a car?

Why was the Polo GTI discontinued?

Can driver's license and vehicle license generally be kept in the car?

What is the function of the EPC in a car?

What Does the Hill Start Assist System Mean?