What is the fuel tank capacity of the Mazda3 Axela?

2 Answers
AdrielAnn
07/25/25 2:37pm
The Mazda3 Axela has a fuel tank capacity of 51 liters. This vehicle is a compact car under Changan Mazda, featuring a 4-door, 5-seat sedan body structure. Its dimensions are 4662mm in length, 1797mm in width, and 1445mm in height, with a wheelbase of 2726mm. The vehicle comes with a warranty of 3 years or 100,000 kilometers. The Mazda3 Axela is equipped with a 4-cylinder, 1.5-liter, 117-horsepower naturally aspirated engine, paired with a 6-speed automatic manual transmission. Both the cylinder head and block are made of aluminum alloy. The suspension system consists of a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension.
Was this review help?
17
3
Share
Henry
08/11/25 9:09pm
I've been driving my Axela for over a year now, and its 51-liter fuel tank capacity is quite practical for daily commuting. In the city, I usually refuel once a week, spending a little over 200 yuan to fill up, which gets me around 500 kilometers. For long-distance trips, driving to neighboring provinces is no problem at all. However, it's advisable not to let the fuel tank stay empty for too long to avoid carbon buildup affecting the engine's lifespan. During regular maintenance, it's also good to check the fuel pump to ensure everything is functioning properly. Overall, the size is just right, making it a worry-free design.
Was this review help?
9
1
Share
Expand All
More Forum Discussions

Can the Rear Seats of the 7th Generation Elantra Be Folded Down?

The rear seats of the high-end version of the 7th Generation Elantra can be folded down. Here is some relevant information about the Elantra: 1. Introduction: The Elantra is a typical Korean car. As the best-selling overseas model of Hyundai, it has gone through six generations. The Beijing Hyundai Elantra is based on its sixth-generation model, with slight improvements made to suit Chinese road conditions and climate. It is well-received for its rich configurations and relatively high cost performance. 2. Body: The overall body of the Elantra appears gentle and elegant, but the redesigned front face gives it an aggressive look. Two thick ridges on the engine hood extend forward to a small but prominent grille, creating a strong sense of forward motion. The redesigned wedge-shaped headlights are more sporty and aggressive than the peanut-shaped ones on the Sonata, even featuring a modified effect known as 'smoked headlights' in the tuning community.
19
5
Share

Why does the oil life indicator not change after an oil change?

After changing the engine oil, the reason the oil life indicator does not change is because the oil life reset operation was not performed. Here are some details about engine oil: 1. Function: Engine oil, also known as engine lubricant (English name: Engine-oil), has a density of approximately 0.91×10³ (kg/m³). It serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption for the engine. It is often referred to as the "blood" of a car. 2. Composition: Engine oil consists of two main parts: base oil and additives. The base oil is the primary component of the lubricant, determining its basic properties, while the additives compensate for and improve any shortcomings in the base oil's performance, giving it new characteristics. Additives are an essential part of engine oil.
7
5
Share

What Causes the Handbrake to Lock Up After Rain?

Handbrake lock-up after rain occurs when the brake pads and drums rust and fuse together after prolonged parking with the handbrake engaged following water exposure. Below are detailed explanations of other causes for brake lock-up: 1. Brake Caliper Failing to Retract: Even without pressing the brake pedal, noticeable resistance is felt while driving, and in severe cases, abnormal noises or wheel lock-up may occur. This is often due to internal corrosion of the brake caliper from not changing brake fluid for an extended period. It can be repaired by sanding and applying grease; if the caliper itself is faulty, replacement is necessary. 2. Master Cylinder Cup Jamming: This typically happens when water or other contaminants enter the brake system, or when switching to a different brand of brake fluid without cleaning the system first, causing the master cylinder cup to swell and resulting in lock-up.
20
4
Share

What unit is 80 when a car is traveling per hour?

When a car is traveling at 80 per hour, the unit is kilometers. There are two units for measuring car speed: kilometers per hour (km/h) and miles per hour (mph). Miles per hour, commonly referred to as "mph" in colloquial terms, where 1 mph equals 1.609344 kilometers per hour. Below is more information about mph: 1. Miles per hour (mph): It is a unit of speed measurement, representing miles per hour. It is commonly used in the United Kingdom and Commonwealth countries for calculating speed limits on roads, tennis serve speeds, and also for measuring the central wind speeds of tropical cyclones. 2. Kilometers per hour (km/h): km/h is the unit of measurement currently used in China, and domestic cars use kilometers per hour as the speed unit.
6
3
Share

How to Adjust the Timing of a Jetta Car?

The steps to adjust the timing of a Jetta car are as follows: 1. First, use the timing wheel axle clamp of the Jetta King to secure the timing wheel axle to prevent movement during adjustment, which could lead to alignment failure. 2. Then, slightly loosen the screws on the timing wheel to facilitate subsequent chain alignment. 3. Next, locate the colored chain on the timing wheel axle, which serves as a marker for adjustment. 4. Finally, release the clamp securing the wheel axle to complete the alignment. Additional information about car timing is as follows: 1. The engine's valve timing mechanism controls the timing and duration of the engine's intake and exhaust. 2. Its function is to open and close the intake and exhaust valves of each cylinder in sequence according to the engine's operating order, allowing fresh air to enter the cylinders and expelling the combustion exhaust gases.
9
5
Share

What is the reason for no screen projection after CarPlay connection?

Connected to CarPlay, but the car screen does not display. First, check whether the data cable connection is damaged or the plug is loose. CarPlay is an in-car system released by Apple Inc. in the United States, which can seamlessly integrate users' iOS devices and iOS usage experience with the dashboard system. When connecting CarPlay, first ensure that the car model supports CarPlay, and then proceed with the connection. Prepare an original USB cable and connect it to the car's USB port. At this time, the car system will automatically open CarPlay. If the CarPlay interface does not appear on the car's main screen, click the CarPlay icon on the phone to start CarPlay. The connection method of CarPlay is that users connect to the car via USB. After successful connection, the screen will display a handshake between the two parties, and then users can watch the phone screen and use various functions of the iPhone without touching it.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.