What is the fuel tank capacity of the Borui in liters?

3 Answers
AmirLynn
07/29/25 9:08am
Borui offers 3 models, all with a fuel tank capacity of 70 liters. The vehicle is equipped with a 1.8-liter turbocharged engine, and all models feature a 7-speed wet dual-clutch transmission. All variants adopt a front-engine, front-wheel-drive layout. The 2021 Borui 1.8T Guofeng Edition and 1.8T Linghang Edition both have a 70-liter fuel tank capacity, using gasoline as fuel with an octane rating of 92. During actual refueling, the fuel quantity may exceed the calibrated capacity. This occurs because automakers measure tank capacity from the tank bottom to the safety level, while additional space exists between the safety level and the tank opening. This design ensures safe expansion of fuel when temperatures rise without causing overflow. If refueling reaches the tank opening, the actual fuel quantity will exceed the calibrated capacity. To check remaining fuel, observe the fuel gauge on the right side of the instrument cluster marked with E (Empty) and F (Full). When the needle approaches E, it indicates low fuel level; near F means sufficient fuel.
Was this review help?
2
4
Share
MakaylaLee
08/12/25 8:30am
I often drive my Borui and remember its fuel tank capacity is around 70 liters, which is quite suitable—not too large to make refueling troublesome, nor too small to require frequent stops for fuel during long-distance drives. Generally speaking, considering the Borui's combined fuel consumption, a full tank can cover approximately 700 kilometers, making it very convenient for daily commutes or family trips. Even occasional business trips don’t require urgent searches for gas stations. I recommend refueling before the low-fuel light comes on to protect the fuel pump and extend its lifespan. When choosing a gas station, opt for reputable ones to avoid engine damage from poor-quality fuel. Overall, the 70-liter design strikes a balance between practicality and economy, ensuring a worry-free and convenient driving experience.
Was this review help?
16
1
Share
Expand All
KingDella
10/06/25 3:50am
As a young car owner, I find the Borui's fuel tank capacity of exactly 70 liters makes it particularly easy to drive. For daily commuting, refueling once a week is sufficient, saving time for other activities. My friend's Toyota Corolla has a smaller fuel tank, requiring more frequent refueling, making the Borui more convenient in comparison. A full tank doesn't cost much, usually around 400 yuan, leaving extra money for outings. It's important to choose reputable gas stations to prevent fuel quality issues from affecting the car's condition. Regularly checking tire pressure also helps reduce fuel consumption and avoid wasting money on gas. The 70-liter size is just right, suitable for all types of road conditions.
Was this review help?
2
1
Share
Expand All
More Forum Discussions

Is the Santana compliant with China 6a or China 6b emission standards?

The Santana meets the China 6b emission standard. The newly upgraded model has launched four variants that comply with the China 6b emission requirements, fulfilling the stringent emission regulations. The Santana is a compact sedan produced by SAIC Volkswagen, with body dimensions of 4546mm in length, 1710mm in width, and 1427mm in height, along with a wheelbase of 2458mm. The redesigned Santana retains Volkswagen's signature design language, maintaining consistent exterior and interior styling. The front fascia continues to feature a horizontal slat grille accented with chrome trim. Under the hood, the vehicle is powered by a 1.5L naturally aspirated engine delivering maximum power of 82kW and peak torque of 145Nm. Transmission options include a 5-speed manual gearbox and a 6-speed automatic transmission.
19
3
Share

How to Choose a Car Windshield?

Methods for choosing a car windshield: 1. You must select glass that matches the car, as this component is not universal; 2. It is best to choose original equipment manufacturer (OEM) glass. If opting for aftermarket glass, ensure it has a 3C certification, as safety is paramount. There are three main types of automotive glass: laminated glass, tempered glass, and zone-tempered glass. Laminated glass involves bonding a transparent adhesive plastic film between two or three layers of glass, combining the toughness of plastic with the hardness of glass to enhance its resistance to breakage. Tempered glass is produced by quenching ordinary glass to create internal stresses, thereby strengthening the glass. When impacted and broken, tempered glass shatters into small, blunt-edged fragments, reducing the risk of injury to passengers.
10
5
Share

What Causes the Engine Warning Light to Illuminate in the Lavida?

The engine warning light in the Lavida may illuminate due to the following 7 main reasons: Sensor Malfunction: The sensors involved include those for coolant temperature, crankshaft position, air flow, intake air temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel or Oil Quality Issues: Failure to use the fuel or engine oil as specified by the manufacturer may cause engine wear, leading to the illumination of the warning light. Poor Combustion of Air-Fuel Mixture: Poor combustion can result in engine carbon deposits or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a caution. Issues such as faulty spark plugs, defective ignition coils, fuel pump failure, or clogged fuel lines can all cause poor combustion of the air-fuel mixture. Turbocharger Problems: Issues with the intake boost pipes or turbocharger can also trigger the engine warning light. The most common problem is a damaged turbocharger, often accompanied by symptoms like oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake Problems: If the vehicle's intake system is compromised, it may lead to blocked engine pipes, and in severe cases, the engine warning light will illuminate. A dirty or uncleaned air filter can cause intake problems. Exhaust Problems: Exhaust system faults can also cause the engine warning light to illuminate. Common causes include faulty rear oxygen sensors, catalytic converter issues, or problems with the exhaust camshaft and bearings. The catalytic converter is particularly prone to failure due to the use of leaded gasoline, lead- or silicon-containing lubricant additives, physical damage, or fuel system malfunctions. Anti-Theft System Malfunction: If the vehicle's electronic anti-theft system fails or if there is a mismatch between the anti-theft controller and the engine ECU, the anti-theft system may prevent the engine from operating correctly, accompanied by the illumination of the engine warning light. If the engine warning light illuminates, follow these steps: First, check if the engine is running normally. Look for symptoms like shaking or black smoke. If present, avoid restarting the engine. Note: Never restart the engine if the red warning light is on. If the engine can start, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'ON' position (without depressing the clutch). The vehicle will enter self-check mode upon powering up. Wait 5-10 seconds to see if the warning light turns off. If the light remains on, visit a service center as soon as possible. Technicians can use a portable diagnostic tool to read the fault codes, identify the issue, and perform targeted repairs.
8
0
Share

What type of suspension does the Vision use?

The Vision uses a MacPherson independent suspension for the front and a torsion beam non-independent suspension for the rear. There are two common types of suspensions in vehicles: independent suspension and non-independent suspension. Common independent suspensions include MacPherson suspension, multi-link suspension, double-wishbone suspension, and double A-arm suspension. Non-independent suspensions include torsion beam suspension and solid axle suspension. In an independent suspension, there is no connection between the two wheels on the same axle, so the movement of the two wheels on the same axle does not interfere with each other. This type of suspension improves wheel contact with the ground, enhancing handling and comfort. In contrast, a non-independent suspension has a connection between the two wheels on the same axle, resulting in mutual interference in their movement. The comfort and handling of non-independent suspensions are inferior to those of independent suspensions.
1
1
Share

What Causes Intermittent Shaking When Idling in Park?

Intermittent shaking when idling in park can be caused by: 1. Unstable oil pressure. If you've already cleaned the engine carbon deposits, throttle body, replaced oil pads and spark plugs, but the vehicle still shakes at idle, it's recommended to visit a 4S shop to check the fuel supply pressure and intake pressure sensor; 2. Aging engine components. Worn engine mounts may cause vehicle shaking. If these parts fail, the vibrations will transmit to the steering wheel and cabin; 3. Excessive dirt in the engine or carbon buildup in fuel injectors. When carbon deposits are excessive, gasoline sprayed by cold-start injectors gets largely absorbed by carbon deposits. After starting, the gasoline adsorbed on carbon deposits gets sucked into the cylinders by engine vacuum for combustion, enriching the air-fuel mixture. This results in fluctuating lean/rich combustible mixtures, causing shaking.
1
4
Share

What is the function of the button on the left side of the BMW gear lever?

The button on the left side of the BMW gear lever is the multimedia option selection and volume adjustment button, used during media playback and unrelated to the vehicle's driving system. Operation method: Depress the brake pedal of the BMW 5 Series, press the one-touch start button of the BMW 5 Series, the instrument panel of the BMW 5 Series lights up, and the vehicle's power is turned on. Press the knob up, down, left, or right to adjust multimedia options. Rotate it left to decrease the volume and right to increase the volume. Location of multimedia option selection and volume adjustment buttons in other vehicles: In Honda vehicles, the multimedia option selection and volume adjustment buttons are located on the steering wheel.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.