What is the fuel tank capacity of the 2020 Geely Vision?

1 Answers
OSamantha
07/30/25 8:21am
Fuel tank capacity is 55L. Specific details are as follows: Introduction to fuel tank capacity: Generally, compact cars have a fuel tank capacity of 35-45 liters, while mid-size cars have a fuel tank capacity of around 55-75 liters. A full tank typically allows for a driving range of approximately 500 kilometers. The size of the fuel tank correlates with the vehicle's fuel consumption—larger fuel tanks are found in vehicles with higher fuel consumption, and smaller tanks in those with lower consumption. Vehicles with larger fuel tanks generally have a driving range of 400~600 kilometers. Lighter vehicles with smaller displacements tend to have correspondingly smaller fuel tanks, while heavier vehicles with larger displacements naturally have larger fuel tanks. However, the maximum driving range on a full tank is mostly between 400~600 kilometers. Fuel tank capacity calculation: In China, regulations stipulate that a vehicle's fuel tank capacity should be at least 95% of the rated value, but in practice, the actual capacity is usually greater than the nominal capacity, so there is no need to worry about the fuel tank being smaller than advertised. Currently, many vehicle fuel tank capacities are manufactured based on the brand and model specifications.
Was this review help?
14
3
Share
More Forum Discussions

Is a car battery DC or AC?

Car batteries provide DC (direct current) power. Below is an introduction to the functions of automotive power supplies and their automatic protection features: Functions of automotive power supplies: An automotive power supply, also known as a power inverter, is a device that converts DC12V direct current into AC220V alternating current matching household electricity standards, making it a convenient power converter for general electrical appliances. Automatic protection in vehicles: Automotive power supplies are designed with consideration for external operating conditions. They automatically shut down for protection when overload or short circuit conditions occur. Through self-feedback mechanisms, these power supplies maintain stable output voltage, with less than 10V variation between no-load and rated voltage conditions.
19
0
Share

After how many years does a car require biannual inspections?

Starting from the date of purchase, vehicles that have been in use for fifteen years must undergo inspections every six months (twice a year). Below is relevant information regarding vehicle inspections: Vehicle inspection expiration date: The vehicle inspection can be conducted within the last three months before the expiration date. This means if there are less than three months remaining until expiration, the inspection cannot be performed. Inspection authorization letter: If you are in a different location, you can ask relatives or friends to handle the inspection on your behalf, but you must provide a signed authorization letter. In other words, the inspection does not require the owner's personal presence and can be delegated to someone else, provided that a signed authorization letter is submitted.
15
0
Share

Which model is the seventh-generation Teana?

Seventh-generation Teana is the 2020 model. Below are the specific details of Teana: 1. Model positioning: Teana is a mid-size sedan under Nissan, with a wheelbase of 2775 mm, and length, width, and height of 4930 mm, 1795 mm, and 1475 mm respectively. 2. Power: Teana's 3.5-liter naturally aspirated engine delivers 252 horsepower and a maximum torque of 326 Nm. The engine's maximum power is achieved at 6000 rpm, and the maximum torque at 4400 rpm. This engine is equipped with continuous variable valve timing system and multi-point fuel injection technology, and uses an aluminum alloy cylinder head and block. The engine is paired with a CVT transmission.
19
3
Share

Which type of car battery disconnect switch should I choose?

Car battery disconnect switch selection generally involves installing an electromagnetic switch on the vehicle's main power line, with the control circuit of the electromagnetic switch being operated by the ignition key. Below is relevant information about one-button start: Definition: The one-button start device is part of a smart car, serving as a button mechanism that simplifies the starting process and can also shut off the engine. This device can be retrofitted either at the original key lock position or as an independent panel. Precautions: Its starting method is software-based one-button start. There are three main points to note when installing a car one-button start system (the wiring connectors under the ignition switch, the position of the button, and the handling of the steering lock), and it offers multiple functions.
10
1
Share

What is the pure electric range of the Highlander?

When fully charged, the Highlander's range under comprehensive driving conditions is reduced by 40%, with an actual range between 5.95 to 8.6 km. Below is some related information about the Highlander: 1. Introduction to the Highlander: The Highlander is a vehicle produced by Toyota, a large-sized SUV in the Toyota family. It features a spacious body and innovative, roomy interior space. Additionally, the Highlander comes standard with the highest level of safety equipment in its class. 2. Features of the Highlander: This SUV is exceptionally quiet while driving and offers outstanding responsiveness, combining versatility with driving comfort. It is equipped with a 3.5-liter V6 engine that delivers up to 201 kW of power, paired with a stepped 5-speed automatic transmission, ensuring smooth acceleration and good fuel economy.
10
3
Share

What Do the Last Six Digits of the VIN Represent?

The last six digits of the VIN represent the production sequence number. Here are the detailed specifications: 1. World Manufacturer Identifier (WMI): Positions 1-3 indicate the manufacturer, brand, and type. 2. Vehicle Descriptor Section (VDS): There are two standards—European and American. For the American standard, positions 4-8 are used; for the European standard, positions 4-9 are used. 3. Position 9: In the American standard, this is a check digit calculated through a weighted formula; in the European standard, it is the final digit of the VDS. 4. Position 10: Model year. 5. Position 11: Assembly plant. 6. Positions 12-17 (last six digits): Production sequence number.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.