What is the fuel consumption per kilometer for the CR-V?

2 Answers
StBryce
08/28/25 3:16am
The CR-V currently has 17 models on sale. Among them, 9 models including the 2021 CR-V 240TURBO manual two-wheel drive classic edition and the 2021 240TURBO CVT two-wheel drive comfort edition, equipped with a 193 horsepower engine, have an NEDC fuel consumption of 6.6L per 100 kilometers. The other 8 models, including the 2021 CR-V Sharp Hybrid 2.0L two-wheel drive pure edition and the 2021 Sharp Hybrid 2.0L two-wheel drive net speed edition, equipped with a 146 horsepower engine, have an NEDC fuel consumption of 4.9L per 100 kilometers. The fuel tank capacity of the 2021 Honda CR-V varies by model. The distance that can be covered with a full tank of fuel is as follows: Models equipped with a 193 horsepower engine have a fuel tank capacity of 53L, and the distance that can be covered with a full tank is 53/6.6*100=803KM. Models equipped with a 146 horsepower engine have a fuel tank capacity of 53L, and the distance that can be covered with a full tank is 53/4.9*100=1082KM. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before encountering a red light, can increase fuel consumption. The car itself: Cars with larger displacement engines generally consume more fuel than those with smaller displacement engines because larger displacement usually means greater power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low during cold starts, the injected gasoline is less likely to atomize, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up the car, which also increases fuel consumption.
Was this review help?
9
0
Share
LaNoah
09/09/25 8:34am
My CR-V hybrid has been in use for nearly three years, with an average fuel consumption displayed on the dashboard consistently around 5.6L. Last month, I conducted a specific test: after filling up the tank, I drove 680 kilometers before the low fuel warning light came on, which translates to approximately 42 cents per kilometer. My driving is mainly urban commuting, and during heavy traffic in peak hours, the fuel consumption can rise to over 6L, but it drops below 5L on ring roads. A friend's 1.5T gasoline version is slightly higher; he mentioned that aggressive driving can push it to 8L, while normal driving stays just over 7L. I recommend referring to the WLTC data from the Ministry of Industry and Information Technology: 5.5L for the hybrid version and 7.3L for the gasoline two-wheel-drive version, but actual usage can vary significantly depending on road conditions and driving habits.
Was this review help?
6
2
Share
Expand All
More Forum Discussions

How to Set One-Touch Window Control?

To set the one-touch window control, press and hold the window button to raise the window until it is fully closed. Then continue holding the button until you hear a "click" sound from the window. Release the button at this point, and the one-touch window control will be activated. The methods to operate one-touch window control are as follows: 1. Short press: The window will automatically lower completely. Short pull: The window will automatically rise completely. 2. Long press: Release the button during the window's descent to stop it. 3. Long pull: Release the button during the window's ascent to stop it. 4. Long press the unlock button on the remote control to automatically lower all four windows. 5. Long press the lock button on the remote control to automatically raise all four windows.
6
1
Share

Reset Maintenance Light for 2017 Lavida

There are 5 steps to reset the maintenance light for the 2017 Lavida: 1. Turn off the ignition switch and stop the engine; 2. Press and hold the right button on the instrument panel; 3. While holding the right button with your left hand, turn on the ignition switch; 4. Keep holding the button with your left hand until entering the reset mode, then release the right button; 5. Release the right button and press to confirm the reset. The maintenance light serves 2 purposes: 1. Record important component information: It records the mileage of some key components, making it easier for automotive maintenance personnel to understand the vehicle's condition; 2. Serves as a reminder: When the maintenance light comes on, it indicates that the vehicle requires maintenance, and the light should be reset after maintenance is completed.
13
1
Share

Can you change lanes when there is a dotted line next to a solid line?

One side is a dotted line and the other side is a solid line. You can change lanes on the dotted line side, but only the dotted line side can cross into the lane with the solid line, and the lane change must be completed within the dotted line segment. If you exceed the end of the dotted line, it is considered driving over the line. Here are some precautions to note when changing lanes on a dotted line: Violation: During peak traffic hours, you must not forcibly change lanes, as this may affect the normal flow of traffic behind you, potentially resulting in points deducted and fines. Additionally, when waiting in line at a traffic light, if there are many vehicles queued up to the dotted line, some drivers may try to squeeze into the adjacent lane if the vehicles there start moving slower. This is also considered a violation. No consecutive lane changes: Even if the road is clear, you cannot change more than two lanes consecutively on a dotted line. Consecutive lane changes are a violation and may result in a 3-point deduction and a fine.
9
0
Share

What is the character at the beginning of license plates in Hubei?

Hubei license plates start with the character 'E'. The license plate codes for various regions in Hubei Province are as follows: E-A represents Wuhan City, E-B represents Huangshi City, E-C represents Shiyan City, E-D represents Jingzhou City, E-E represents Yichang City, E-G represents Ezhou City, E-H represents Jingmen City, E-J represents Huanggang City, E-K represents Xiaogan City, E-M represents Xiantao City, E-N represents Qianjiang City. Introduction to vehicle license plates: 1. License plates are mostly a combination of Chinese characters, letters, and numbers. Generally, the Chinese character represents the province, the letter following the Chinese character represents the prefecture-level city, and the subsequent letter D represents pure electric vehicles, while F represents non-pure electric vehicles. 2. Vehicle license plates are divided into two types: ordinary license plates and new energy license plates. Based on different colors, they can also be categorized into ordinary family vehicles, government department vehicles, military vehicles, and foreign-related vehicles.
15
3
Share

Can a Gecko Crawl Out of a Sealed Car?

Yes, it can crawl out because a car is not 100% sealed. If a gecko enters your car, you can handle it using the following methods: Geckos prefer darkness: Install lights in areas where geckos frequently appear; they generally avoid well-lit areas. Use air fresheners: Spray strong-smelling air fresheners in places where geckos are often seen to drive them away. Camphor oil: Spray camphor oil in the corners of the car and areas where geckos commonly appear to prevent them from entering. Geckos are beneficial insects that help eliminate mosquitoes and other pests, so there's no need to drive them away. Their presence usually indicates a high number of mosquitoes or other insects.
11
0
Share

What to Do If You Easily Mistake the Accelerator for the Brake While Driving?

Here are the methods to avoid mistaking the accelerator for the brake while driving: 1. Keep your heel on the ground and use your toes to press the brake or accelerator. 2. Position your foot at the same level as the brake. 3. Place your heel below the brake. Press the brake straight down, and when pressing the accelerator, keep your heel stationary and tilt your toes to press the accelerator. 4. Keep your foot on the brake instead of the accelerator. In emergencies, you can press down directly to avoid panic and incorrect operations. The positions of the accelerator and brake are as follows: 1. The accelerator is located on the far right. 2. The brake is positioned in the middle. The functions of the accelerator and brake are: 1. The accelerator is the car's speed control device, used to regulate the vehicle's speed. 2. The brake is the device that stops or slows down the vehicle.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.