What is the fuel consumption of the Tiggo 7?

1 Answers
VanIsabela
07/29/25 5:40pm
The fuel consumption of the Tiggo 7 is 6.3 liters per 100 kilometers. Concept of fuel consumption per 100 kilometers: Fuel consumption per 100 kilometers refers to the fuel consumption of a vehicle traveling a certain speed on the road for 100 kilometers. It is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is a value measured by the manufacturer in an objective environment using a dynamometer installed on the vehicle chassis, converted into speed parameters, and then calculated under specified speed conditions to obtain the theoretical experimental fuel consumption data per 100 kilometers for the model. Definition of constant-speed fuel consumption: Constant-speed fuel consumption is the fuel consumption per 100 kilometers obtained by certain types of vehicles in constant-speed fuel consumption tests as specified by national standards. During road tests, it is necessary to follow the national standards for test conditions, test methods, and test road selection. Test conditions include: the load of the test vehicle, the accuracy of test instruments, fuel, tire selection, ambient temperature, humidity, air pressure, wind speed, etc.
Was this review help?
10
4
Share
More Forum Discussions

Why does the Haval H6 beep while driving?

This is the seatbelt warning sound, likely indicating that the passenger in the front seat has not fastened their seatbelt. Below is relevant information: 1. Body dimensions: The Haval H6 measures 4600 mm in length, 1860 mm in width, and 1720 mm in height, with a wheelbase of 2680 mm. 2. Configuration: The Haval H6 is equipped with two engines—a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine, coded GW4B15A, delivers 169 horsepower and 285 Nm of torque. Its maximum power output is achieved between 5000 and 5600 rpm, while the peak torque range is between 1400 and 3000 rpm.
15
0
Share

What is the Chinese name for Porsche PANAMERA?

Porsche PANAMERA is called Panamera in Chinese. Porsche Panamera is a luxury sedan introduced by Porsche, which is a coupe. The car's design is somewhat similar to the Audi A7, with smooth and rounded body lines and no sharp angles, showcasing Porsche's mature design style. In terms of power, the Panamera is equipped with a 2.9T V6 twin-turbocharged engine, delivering a maximum power of 324 kW and a maximum torque of 550 Nm. It can accelerate from 0 to 100 km/h in just 4.4 seconds. The engine adopts a brand-new design concept, and the twin-turbocharger enhances the car's performance significantly. The fuel efficiency of the Panamera has improved by 16% compared to the previous generation.
17
1
Share

How to Increase Power for a 1.5L Naturally Aspirated Engine?

Engine modification generally refers to upgrading the vehicle's ECU (Engine Control Unit), commonly known as 'flashing stages,' which are categorized into Stage 1, Stage 2, and Stage 3. The familiar intake system modifications, such as installing a high-flow air filter (commonly referred to as a 'mushroom head'), aim to maximize air intake volume while reducing intake air temperature. Additionally, upgrading to a larger exhaust system with wider diameter and faster flow exhaust components can further enhance performance. Replacing the spark plugs with high-energy, stable ones helps minimize energy loss in the ignition system. Combined with a well-balanced air-fuel mixture and high-quality gasoline, these modifications naturally lead to increased power output.
10
0
Share

How to Repair Scratches and Minor Dents on Car Doors?

You can use a bridge-type suction rod, which can adhere to the adhesive pad attached by the car owner, and then continuously turn the screw cap until the dent is pulled out and leveled. Perform light metalworking, use a suction cup to pull out the dented area, then use a hook to reach behind the dented area, and use a rubber hammer to treat the protruding parts. To remove shallow scratches or stains, small scratches can also be treated using an eraser, toothpaste, or essential balm to eliminate minor scratches on the car body.
20
0
Share

How to resolve the P0031 fault code?

You can unplug the sensor connector and measure the resistance between the two wires to see if it falls within the appropriate range. Here is some relevant information: 1. Oxygen sensor poisoning: Oxygen sensor poisoning is a common and difficult-to-prevent fault, especially in cars that frequently use leaded gasoline. Even a new oxygen sensor may only work for a few thousand kilometers. If the lead poisoning is mild, using a tank of unleaded gasoline can remove the lead from the sensor surface and restore normal operation. 2. Causes of failure: The silicon dioxide produced by the combustion of silicon compounds in gasoline and lubricating oil, as well as the organic silicon gas released from improper use of silicone rubber gaskets, can cause the oxygen sensor to fail. Therefore, it is important to use high-quality fuel and lubricating oil.
8
2
Share

Can You Charge in Rainy Days?

You can charge in rainy days. Here is the relevant information: 1. Charging port standards: Manufacturers have strict standards for charging components and interfaces, which generally meet IPX6-IPX7 waterproof ratings. This means that under light rain conditions, there will be no damage to components or safety issues. 2. Parking position: When parking, try to choose a higher ground position. If you are in a low-lying position, prolonged water accumulation may cause the battery or charging port to be submerged in water. Check the charging gun before charging to ensure there is no accumulated water or debris inside, and make sure the charging gun and charging port can fully contact for normal charging.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.