···
Log in / Register

What is the fuel consumption of the second-generation Song Pro XIAOYUN version?

5Answers
MacLeah
07/29/2025, 02:51:55 PM

The second-generation Song Pro XIAOYUN version has a fuel consumption of 7.0L/100km. Here is some information about the BYD Song Pro: 1. Features: It is a "global intelligent large five-seat SUV" under BYD. Taking the 2021 second-generation 1.5T manual elite version of the Song Pro as an example: it is equipped with a 1.5T inline four-cylinder engine, with a maximum torque of 245 N·m and a maximum horsepower of 160 hp, paired with a 6-speed manual transmission, and the body type is a 5-door, 5-seat SUV. 2. Exterior: The length, width, and height are 4650mm, 1860mm, and 1700mm respectively, with a wheelbase of 2712mm, a fuel tank capacity of 63L, a front suspension type of MacPherson independent suspension, and a rear suspension type of multi-link independent suspension.

Was this review help?
102
Share
LaXavier
08/14/2025, 08:33:07 AM

I've been driving the second-generation Song Pro XIAOYUN Edition for almost a year now, and I've gained quite some experience regarding its fuel consumption. In city driving with traffic congestion, it can reach around 8 liters per 100 kilometers, but on highways, it drops significantly to just over 6 liters. The car is equipped with the XIAOYUN 1.5T engine, which is quite advanced in technology, but fuel consumption still largely depends on driving habits. I usually drive steadily, avoiding sudden acceleration and hard braking, and keep the tire pressure at the recommended level, which helps maintain fuel consumption at around 7 liters. Using air conditioning or carrying a full load of luggage can slightly increase the consumption. Regular maintenance is crucial—after replacing the air filter and engine oil, I noticed the fuel efficiency improved. Overall, as a family SUV, its fuel economy is quite reasonable and economical, saving me a lot on daily commutes.

Was this review help?
16
Share
Expand All
VonGavin
10/14/2025, 04:36:47 AM

The official combined fuel consumption for the second-generation Song Pro XIAOYUN version is approximately 7.5 liters per 100 kilometers, which aligns closely with real-world experience. Multiple factors affect fuel consumption, such as higher consumption in congested urban areas, reaching up to 8 liters, while steady highway driving can reduce it to around 6 liters. The XIAOYUN engine, equipped with turbocharging, optimizes fuel efficiency, but driving habits cannot be overlooked: smooth acceleration, maintaining proper tire pressure, and reducing load can significantly improve efficiency. It is recommended to use the fuel-saving mode and conduct regular engine checks to ensure the ignition system and filters are functioning properly. Avoid frequent short trips to keep the engine running more efficiently. Overall, the fuel consumption falls within a reasonable range, making it suitable for daily commuting.

Was this review help?
20
Share
Expand All
VonGenesis
11/27/2025, 09:42:22 PM

In terms of fuel consumption, the second-generation Song Pro XIAOYUN version has a comprehensive average of just over 7 liters. Actual city driving measures around 8 liters, while highway driving is under 6 liters. To save fuel while driving, minimize window usage and rely on air conditioning, reduce sudden braking. Maintaining standard tire pressure and avoiding hauling heavy loads can save a significant amount of fuel. Regular maintenance, including oil and filter changes, is also essential.

Was this review help?
18
Share
Expand All
LeVivian
01/17/2026, 11:05:59 PM

My second-generation Song Pro XIAOYUN Edition has been running for over two years, with fuel consumption generally stable between 7 to 8 liters per 100 kilometers. In congested urban conditions, it tends to be higher, above 7 liters; on highways, it stabilizes around 6 liters. Fuel consumption is significantly affected by driving habits—driving steadily, avoiding sudden acceleration, keeping the vehicle light, and regular maintenance of the engine and filters are key. In cold weather, fuel consumption slightly increases, but using the air conditioning in recirculation mode can save some. Overall, fuel consumption is well controlled. Recording each refueling amount to verify data ensures minimal discrepancies, so you can drive with peace of mind.

Was this review help?
18
Share
Expand All
More Q&A

What are the reasons for the power steering fault indicator light to illuminate?

The reasons for the power steering fault indicator light to illuminate are: 1. There is a large amount of air in the power steering system; 2. Foreign objects in the steering hydraulic line causing the steering pump flow control valve to stick; 3. Loose connections in the power steering system leading to steering fluid leakage; 4. Excessive wear of the steering gear piston cylinder, poor sealing of the oil seal, or control valve sticking or damage. The classifications of power steering systems include mechanical hydraulic power steering, electro-hydraulic power steering, and electric power steering. The principle of mechanical hydraulic power steering is to convert a portion of the engine's power output into hydraulic pump pressure, applying auxiliary force to the steering system to turn the tires.
105
Share

What Causes Cylinder Shaking in a Hot BMW N13 Engine?

Possible reasons for shaking in a hot BMW N13 engine include carbon buildup in the engine, ignition system issues, unstable oil pressure, and aging engine components. Severe carbon buildup in the engine: When there is excessive carbon buildup inside the engine, the gasoline sprayed by the cold-start injector can be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start the engine. Ignition system issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance in the ignition system or inadequate spark plug firing can also lead to such symptoms. Unstable oil pressure: It is recommended to inspect the fuel supply pressure and the intake pressure sensor, among other components. If the fuel pump's supply pressure is abnormal or the intake pressure sensor's readings are incorrect or malfunctioning, it can cause the vehicle to shake. Aging engine components: Normal wear or incorrect readings and malfunctioning of the intake pressure sensor can also cause the vehicle to shake.
115
Share

What are the differences between Wuling Hongguang V and Wuling Rongguang V?

The specific differences between Wuling Hongguang V and Wuling Rongguang V are as follows: 1. Engine horsepower: The maximum horsepower of Wuling Hongguang V's engine is 76 hp, while that of Wuling Rongguang V's engine is 99 hp. 2. Engine torque: The maximum torque of Wuling Hongguang V's engine is 110 Nm, while that of Wuling Rongguang V's engine is 140 Nm. 3. Speed: The maximum speed of Wuling Hongguang V is 120 km/h, while that of Wuling Rongguang V is 150 km/h. 4. Exterior design and interior: The new Hongguang V model is superior to the older Rongguang V model, with a larger cargo space capacity.
109
Share

How to Turn on the Heating in an Audi A4?

The method to turn on the heating in an Audi A4 is as follows: 1. Open the door next to the driver's seat. 2. Step on the brake pedal. 3. Press the one-touch start button, the dashboard will light up, and the vehicle will start. 4. Press the AUTO button, and the button indicator will light up. More information about the Audi A4 is as follows: 1. The Audi A4 is 4763mm long, 1826mm wide, and 1426mm high, with a wheelbase of 2828mm. 2. The Audi A4 uses a high-power version of a 2.0-liter turbocharged engine, which has a maximum power output of 252 horsepower and 370 Nm of torque. The engine can deliver maximum power at 5000 to 6000 rpm and maximum torque at 1600 to 4500 rpm.
113
Share

How to Adjust the Steering Wheel on a Mercedes-Benz?

Mercedes-Benz steering column adjustments can be done either manually or electrically. For manual adjustment, pull down the handle located directly below the steering column. For electric adjustment, use the shortest control lever to adjust the steering wheel up, down, forward, or backward. Below are the methods and an introduction to steering wheel handling: 1. The correct way to hold a car steering wheel is to imagine it as a clock face. The left hand should be positioned between the 9 and 10 o'clock positions, and the right hand between the 3 and 4 o'clock positions. In the event of a collision, this posture provides better support for the body, ensuring driving safety. 2. The steering wheel is a wheel-shaped device used to control the direction of vehicles such as cars, ships, and airplanes. Its function is to convert the force applied by the driver on the edge of the steering wheel into torque, which is then transmitted to the steering shaft. It mainly consists of a frame, foam, and mounting clips or screw holes corresponding to the driver's airbag (DAB).
108
Share

Do You Need to Press the Brake When Shifting from D to S Mode?

Shifting from D to S mode can be done without pressing the brake, but it is recommended to do so. The specific principles are as follows: 1. Automatic transmissions typically have two forward gears: D mode and S mode. D mode can be understood as normal driving, which is commonly used for everyday driving. S mode is generally referred to as sport mode. When switching to S mode, the engine's roar becomes more pronounced, and both RPM and speed increase accordingly. This is due to changes in air intake. 2. When shifting from D to S mode, it involves manually altering the gear ratio of the car, essentially a downshift operation. Lightly pressing the brake while shifting helps to decelerate and match the lower gear, ensuring the car accelerates smoothly without any lag and achieves quicker speed gains. This is why many experienced drivers lightly press the brake during this shift.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.