···
Log in / Register

What is the fuel consumption of the Ruicheng CC engine?

4 Answers
LeColton
07/30/25 2:42am

The fuel consumption of the Changan Ruicheng CC is 6.7L per 100 kilometers. The vehicle's fuel consumption is related to road conditions, driving habits, driving environment, vehicle load, etc. For example, driving on congested urban roads will definitely result in higher actual fuel consumption than normal driving. More details are as follows: 1. The Changan Ruicheng CC is equipped with a 1.5T turbocharged engine, with a maximum power of 115kW/5500rpm and a maximum torque of 225N·m/2000-4000rpm. The transmission options include a 6MT and Aisin's latest third-generation 6AT transmission. The STT-Intelligent Fuel Saving System also enhances fuel economy. 2. The new car features a chrome-plated front grille design, giving the front face a more integrated look. The grille blends seamlessly with the headlights on both sides, and the sharp headlight design extends across the sides, paired with a slender lower grille, showcasing a strong sense of sportiness and a more luxurious and grand appearance. This design is quite trendy for young people.

Was this review help?
14
1
Share
Rita
08/16/25 8:58am

I've been driving the Ruicheng CC as my daily commuter car for a year now, and I have a deep understanding of its fuel consumption. During urban commuting in traffic jams, the fuel consumption is around 8.5 liters per 100 kilometers, significantly higher than the official rating of 7.2 liters. On highways, it's much more economical; when I maintain a steady speed on long trips, the consumption drops below 6.7 liters. The car's 1.5T engine provides ample power, but frequent rapid acceleration or using the air conditioning can spike the fuel consumption. I recommend developing smooth driving habits, such as using the economy mode more often than the sport mode. The car's aerodynamic design is good, but low tire pressure can also affect fuel efficiency. I check the tire pressure monthly, keeping it at 2.5 bar. The combined fuel consumption is around 7.5 liters, which isn't the most fuel-efficient but is acceptable. Regular maintenance, like timely oil changes, helps the engine run efficiently.

Was this review help?
5
5
Share
Expand All
JacksonLynn
10/21/25 7:48am

As an engine technology enthusiast, I have some insights into the fuel consumption analysis of the Ruicheng CC. The 1.5T Blue Whale engine in this car is quite efficient, but the fuel consumption isn't particularly low. The official data shows 9L/100km in urban conditions and 7.2L/100km combined. In real-world driving, I've tested it several times in the city, and every time I encounter traffic jams, the consumption approaches 9L or even higher. The turbocharging and direct injection help save fuel at high speeds, but fuel consumption fluctuates more at low speeds. Key factors affecting fuel consumption include driving style consistency, traffic congestion, and weather conditions; using the heater or sudden braking will increase consumption. The lightweight body helps, with highway cruising consumption dropping to just over 6L. I recommend regularly cleaning the air filter and using high-quality engine oil to keep the engine in optimal condition, which can effectively reduce fuel consumption over the long term.

Was this review help?
20
0
Share
Expand All
LucasMarie
12/04/25 8:16am

I've been keeping an eye on the economics of fuel consumption, as the fuel efficiency of the Ruicheng CC directly impacts my car maintenance costs. With a combined fuel consumption of around 7.2 liters per 100 km, assuming I drive 1,500 km per month and fuel costs 8 yuan per liter, the monthly fuel expense would be 864 yuan. This is considered a moderate level among vehicles in the same class, but frequent short-distance driving tends to consume more fuel. A friend of mine owns one, and its urban fuel consumption exceeds 8 liters, while on the highway, it drops to a more economical 6.5 liters. To save money, optimizing driving habits is essential—such as avoiding sudden starts or driving with windows down, which increases wind resistance. Compared to pure electric or hybrid vehicles, the Ruicheng CC consumes slightly more fuel but has a lower initial purchase price. Maintenance is also crucial; ensuring proper tire pressure and keeping the engine well-maintained can reduce consumption. In practical use, fuel consumption fluctuates between 7 to 8 liters, translating to a manageable monthly fuel cost of around 600 yuan.

Was this review help?
15
5
Share
Expand All
More Forum Discussions

how much to put struts on a car

Replacing struts on a car typically costs between $750 and $1,500 for a full set of four, including parts and labor. For a single strut, expect to pay $150 to $400 . The final price is highly dependent on your car's make and model, the quality of the parts, and local labor rates. While it's a significant investment, worn struts critically impact safety, handling, and tire wear, making replacement a necessary repair. The largest cost variables are the parts themselves and the labor intensity of the job. Struts are key structural components of your suspension system, housing the spring and shock absorber in one unit. They control wheel movement and ensure tire contact with the road. Factors Influencing the Cost: Vehicle Type: Luxury and performance vehicles, or trucks requiring heavy-duty struts, will have significantly higher part costs than economy cars. Part Quality: You can choose from OEM (Original Equipment Manufacturer) parts, premium aftermarket brands (like Monroe or KYB), or more economical options. Premium parts often offer better longevity and performance. Labor Costs: Mechanics typically charge 1.5 to 3 hours of labor per axle. This job requires specialized tools like a spring compressor to safely disassemble the strut assembly. Additional Parts: It is often recommended to replace related components simultaneously to save on future labor. This includes strut mounts/bearings and sway bar end links , which can add $100 to $300 to the total bill. A professional mechanic will also perform a wheel alignment after installation, as replacing struts alters the vehicle's geometry. This service usually costs an additional $100 to $200 but is essential to prevent premature tire wear. Vehicle Type Estimated Cost for 4 Struts (Parts & Labor) Common Labor Time (Hours) Recommended Additional Service Economy Car (e.g., Honda Civic) $750 - $1,100 2.5 - 3.5 Wheel Alignment Midsize SUV (e.g., Ford Explorer) $900 - $1,300 3.0 - 4.0 Strut Mounts Replacement Luxury Sedan (e.g., BMW 3 Series) $1,200 - $2,000+ 3.5 - 5.0 Full Suspension Check Full-Size Truck (e.g., Ford F-150) $1,000 - $1,600 3.0 - 4.5 Sway Bar Link Replacement Average Cost (Across Models) $450 - $900 (per axle) 1.5 - 2.5 (per axle) Wheel Alignment ($100-$200)
20
3
Share

how to check a car's suspension

Checking your car's suspension is a straightforward process that involves a visual inspection, a simple physical test, and a short drive. The most telling sign of a worn suspension is excessive bouncing. After pushing down firmly on each corner of the car and releasing, the car should rebound and settle after one or two bounces. If it continues to oscillate, the shock absorbers or struts are likely worn out. Start with a visual inspection . Park on a level surface, turn off the engine, and set the parking brake. Look under the car for obvious signs of damage like broken springs or leaking fluid. Shock absorbers and struts are filled with hydraulic oil; any oily wetness on their exterior indicates a seal failure and means they need replacement. Next, perform the "bounce test." Push down with your full body weight on the front bumper, then release. Do the same for the rear. The car should stop bouncing almost immediately. Listen for clunks or knocks during this test, which can point to worn bushings or other loose components. Finally, take a short, careful drive . Pay attention to how the car handles. Does it feel floaty or veer excessively on the highway ( body roll )? Does the front end dive sharply when you brake? Does the car squat heavily during acceleration? Do you hear knocking sounds when going over bumps? These are all symptoms of a suspension system that's no longer performing optimally. For a systematic approach, refer to the common symptoms below. Suspension Component Common Failure Symptoms Typical Visual Clues Shock Absorber / Strut Excessive bouncing, poor cornering, nose-dive when braking Fluid leaks, physical damage Coil Spring Sagging ride height, uneven tire wear, knocking sounds Broken or corroded metal Stabilizer Bar Link Clunking noise over bumps, increased body roll Worn or broken rubber bushings Control Arm Bushing Steering wander, uneven tire wear, vague steering feel Cracked, torn, or missing rubber Ball Joint Clunking on bumps, steering vibration, uneven tire wear Grease leakage, excessive play
9
1
Share

how much to paint a car scratch

The cost to paint a car scratch typically ranges from $50 to $1,500+ . The final price depends entirely on the scratch's depth, size, and location, as well as your car's make and model. A small, superficial clear coat scratch might only need a $50 DIY touch-up pen, while a deep scratch that has penetrated the primer and reached the bare metal, requiring a multi-stage repaint of an entire panel, can easily cost over $1,000 at a professional body shop. To determine the cost, you must first identify the type of scratch. Run your fingernail gently across it. If your nail doesn't catch, it's likely a clear coat scratch confined to the top, protective layer. These are the cheapest to fix. If your nail catches slightly, the scratch has likely reached the base coat (color layer). If it catches deeply, it has probably gone through to the primer or metal, requiring the most extensive repair. Scratch Type & Repair Method Average Cost Range Key Factors Influencing Cost Clear Coat Scratch (Paintless Dent Repair) $50 - $150 Scratch length, vehicle accessibility Minor Scratch (Touch-Up Paint / Spot Repair) $150 - $400 Scratch size, paint color complexity (e.g., metallics, tri-coats) Deep Scratch (Full Panel Repaint) $500 - $1,500+ Panel size (door vs. hood), need for blending adjacent panels, paint quality (OEM vs. aftermarket) Multi-Panel Scratch Repair $1,000 - $4,000+ Number of panels, extent of damage, labor rates in your region Bumper Cover Repaint $400 - $1,200 Material (plastic requires flexible additives), integrated sensors requiring recalibration For minor imperfections, a high-quality scratch removal compound and a DIY kit can be a cost-effective solution. However, for anything beyond the clear coat, professional assessment is recommended to prevent rust and ensure a color match. Always get quotes from several reputable body shops. The estimates should detail the labor hours, paint materials, and whether paint blending is necessary for a seamless finish.
11
1
Share

how old for a car to be vintage

A car is generally considered vintage when it is between 20 and 40 years old . However, the most widely accepted benchmark in the United States, used by organizations like the Antique Automobile Club of America (AACA), is the 25-year mark . Once a vehicle hits this quarter-century milestone, it becomes eligible for "antique" or "historic" vehicle registration in most states, which often comes with reduced registration fees and insurance premiums. It's crucial to distinguish "vintage" from "classic" and "antique," as these terms are not always interchangeable. "Classic" often refers to a specific list of high-quality, desirable models, while "antique" typically means a car is 45 years or older. The 25-year rule exists because it represents a generational shift. Cars from this era are typically no longer daily drivers but are preserved for their historical interest, unique design, or cultural significance. They often feature technology and styling that are distinctly different from modern vehicles. Organization / Standard Typical Age Requirement (Years) Key Notes Antique Automobile Club of America (AACA) 25 The most influential standard for "antique" status in the U.S. Classic Car Club of America (CCCA) 20-30 Focuses on high-end "Full Classic" cars from specific eras. Most U.S. State DMVs 25 For "Historic" or "Antique" vehicle registration plates. Hagerty Insurance 20+ Considers cars 20+ years old for classic car insurance policies. Vintage Era (General) 1919 - 1930 A precise historical era, often called the "Vintage Era." Ultimately, a car's status isn't just about its age. Its originality, historical significance, and condition play a huge role. A well-preserved 30-year-old Toyota Camry might be considered an "old car," while a 30-year-old Acura NSX is undoubtedly a vintage sports car. The designation is as much about cultural perception as it is about a number on a calendar.
18
4
Share

how to buy a car for a business

Buying a car for your business involves a distinct process focused on maximizing financial benefits and operational efficiency. The core decision is choosing between leasing and purchasing , each with significant tax implications. For 2024, the IRS Section 179 deduction allows businesses to deduct up to $28,900 of a qualified vehicle's purchase price in the first year, which heavily favors buying for high-mileage use. Leasing, on the other hand, often results in lower monthly payments and includes the vehicle's full warranty coverage, minimizing unexpected repair costs. Key Steps in the Business Car Buying Process: Define Operational Needs: Start by analyzing the vehicle's primary use. Is it for client visits, hauling equipment, or high-mileage sales routes? This determines the vehicle class (luxury sedan, SUV, or truck) and required features. Establish a Budget: Consider the total cost of ownership, including fuel, insurance, maintenance, and, crucially, the tax implications. Consulting with your accountant is essential here. Research and Select Vehicles: Prioritize reliability, safety ratings, and resale value. Business-focused trims often offer better value with durable interiors and fleet management compatibility. Secure Business Financing: Approach banks or credit unions with your business plan. Business auto loans typically have different terms than personal loans. Obtain pre-approval to strengthen your negotiating position. Negotiate with the Dealer: Identify several dealerships and negotiate the price based on fleet or business incentives. The goal is the final out-the-door price, including all fees. Finalize the Purchase: Ensure the vehicle is registered and titled in the business's name. This is critical for separating personal and business assets and for claiming deductions. Consideration Leasing Purchasing Upfront Cost Lower down payment, first month's payment Higher down payment (typically 10-20%) Monthly Payment Generally lower Generally higher Tax Benefit Lease payments may be deductible as a business expense Eligible for Section 179 deduction and depreciation Mileage Limits Strict limits with penalties for overage No restrictions Long-Term Cost Consistently paying for a vehicle you never own Builds equity; no payments after loan term Best For Image-conscious businesses, predictable budgeting, low mileage High-mileage drivers, customization, long-term ownership Ultimately, the right choice balances your cash flow, tax situation, and how the vehicle will be used to generate revenue for your business.
20
1
Share

how to check ac pressure in car

The most reliable way to check your car's AC pressure is by using a set of manifold gauges connected to the service ports on your AC system. The low-side pressure with the AC running max cool typically should read 25 to 45 PSI , while the high-side pressure can range from 150 to 250 PSI , depending on ambient temperature. However, interpreting these readings correctly requires understanding the relationship between pressure and temperature. This is not a simple "good/bad" check and can be dangerous for untrained individuals due to the high-pressure refrigerant. Safety is the absolute first step. The AC system is under high pressure and contains refrigerant, which can cause severe frostbite upon contact with skin. Always wear safety glasses and gloves. Never attempt to open the system or connect gauges if you are unfamiliar with the process. You'll need an AC manifold gauge set. Locate the two service ports under the hood: the low-pressure port (larger, usually on the suction line from the firewall) and the high-pressure port (smaller, on the discharge line from the compressor). With the engine off, connect the blue (low-side) and red (high-side) hoses to their respective ports. Start the engine and turn the AC to the coldest setting with the fan on high. The gauges will now display the pressures. The correct pressure is highly dependent on the outside air temperature. The following table provides a general reference for R-134a refrigerant systems with the AC running: Ambient Air Temperature (°F) Expected Low-Side Pressure (PSI) Expected High-Side Pressure (PSI) 65°F 25-35 PSI 135-155 PSI 70°F 30-40 PSI 145-175 PSI 75°F 35-45 PSI 150-185 PSI 80°F 40-50 PSI 175-210 PSI 85°F 45-55 PSI 190-225 PSI If your readings are significantly off, it indicates a problem. Low pressures on both sides often mean the system is undercharged. A very low low-side pressure with a high high-side pressure could point to a blockage, like a clogged expansion valve or orifice tube. If you're not comfortable diagnosing these issues, the safest and most effective step is to take your car to a certified technician.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.