What is the fuel consumption of the Porsche Cayenne?

What does 'set' mean in a car?

The 'set' on a car refers to the speed setting switch, which is the cruise speed control indicator. More details are as follows: 1. When setting the cruise speed, accelerate the car to the desired speed and press the 'set' button. The car speed usually needs to be greater than 30 miles per hour. 2. When using cruise speed control, if you step on the brake, the cruise speed control will stop working. 3. The cruise speed control system can store the current speed and automatically maintain this speed. When speed control is not needed, simply stepping on the brake pedal will immediately stop the speed setting function, but the speed information will continue to be stored. 4. To resume speed control, pressing the 'Resume' switch will restore the originally stored speed, and the car will continue to drive at this speed.

12

4

Share

What car is Hover?

Hover is a Haval automobile, which was later renamed as Haval. The relevant introduction of the new Haval car is as follows: 1. The new Haval is a compact SUV. 2. The body dimensions are: length 4653mm, width 1886mm, height 1730mm, wheelbase 2738mm, front track 1585mm, rear track 1581mm. 3. The fuel tank capacity is 58l, and the trunk capacity is 347l. 4. The Haval is equipped with a 2.0t turbocharged engine, with a maximum horsepower of 211ps, a maximum power of 155kw, a maximum torque of 325nm, and is matched with a 7-speed dual-clutch transmission.

2

0

Share

What is the length of the Honda Accord?

The length of the Honda Accord is 4893mm. Here is a partial introduction to the Honda Accord: 1. The length, width, and height of the Honda Accord are 4893mm, 1862mm, and 1449mm respectively. 2. The Honda Accord adopts a more youthful design language, with sporty styling that aligns with the aesthetic preferences of today's younger generation. 3. The side profile of the Honda Accord features a specially designed fastback line, complemented by C-shaped taillights and a dual-exhaust layout, creating a dynamic and distinctive appearance. 4. The interior of the Honda Accord incorporates a floating multimedia screen and a semi-digital instrument cluster, significantly enhancing the technological feel of the cabin. The new three-spoke multifunction steering wheel further elevates the sporty atmosphere. Additionally, features such as automatic air conditioning and a 360-degree panoramic camera are included in the Accord's configuration, ensuring a high-tech experience. Some models are also equipped with Honda SENSING (Intelligent Driver-Assist System), leveraging Honda's cutting-edge technology to enhance driving safety.

4

1

Share

How often should the spark plugs be replaced in a BMW B48 engine?

For BMW models equipped with the B48 engine, it is recommended to replace the spark plugs every 30,000 kilometers. If the spark plugs are not replaced for a long time, it can lead to various issues such as leakage in the vehicle's ignition system, increased fuel consumption, reduced power, and most importantly, difficulty in starting the engine, which affects the normal use of the vehicle. Spark plug replacement interval: Under normal maintenance conditions, spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is advisable to follow the user manual. The following standards can be used as a reference for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, and remove the high-voltage ignition wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris such as leaves or dust and ensure they are cleaned thoroughly. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the high-voltage ignition wires in the correct firing order and secure the cover.

10

5

Share

What is the fuel consumption of Dongfeng Fengguang 580 Pro?

The comprehensive fuel consumption of Dongfeng Fengguang 580 is 9 liters. It is most fuel-efficient when driving on highways, with a typical consumption of 7.9 to 8.3 liters. In urban areas, the consumption ranges from 8.3 to 10.5 liters. When the air conditioning is turned on, the fuel consumption increases significantly, reaching about 10.5 to 15 liters. The final comprehensive fuel consumption is around 9 to 9.5 liters. Here are some factors that affect a car's fuel consumption: 1. When the tire pressure is too low or the tread is severely worn, the contact area between the tire and the road increases, leading to greater friction and rolling resistance, which naturally results in higher fuel consumption. While higher tire pressure can save fuel to some extent, it reduces ride comfort and increases the risk of tire blowouts. 2. If the vehicle frequently carries heavy loads, fuel consumption will naturally increase. Changes in road conditions also affect fuel consumption. If the road conditions are poor, with frequent stops and starts, fuel consumption will also rise. 3. Driving style is another hidden factor. A smooth start and linear acceleration are more fuel-efficient, while aggressive driving behaviors like rapid acceleration, frequent braking, frequent starts, and unnecessary revving consume more fuel. Since a car's mechanical performance cannot be instantly maximized, such driving styles naturally lead to higher fuel consumption. Higher-quality gasoline allows for more complete combustion in the engine, resulting in lower fuel consumption. Conversely, gasoline with more impurities will increase fuel consumption. 4. Poor-quality engine oil (or overfilled oil, which can enter the combustion chamber and affect gasoline combustion) can also increase fuel consumption. Insufficient lubrication increases the engine's workload, requiring more gasoline to achieve the same output. 5. Additionally, severe carbon buildup in the intake and exhaust systems, fuel lines, injectors, or throttle valves, as well as issues with the catalytic converter, sensors, or even spark plugs, can lead to wasted fuel and increased consumption.

18

5

Share

In which year did China 5 vehicles start?

China 5 emission standard vehicles started production in 2012 and were implemented in 2013. The emission control level of the China 5 standard is equivalent to the fifth stage emission standard currently implemented in Europe. Additional information: 1. China 5 vehicles refer to those that comply with the "National Fifth Stage Emission Standards for Motor Vehicle Pollutants". The emission standards for motor vehicle pollutants are established to implement environmental protection laws, reduce and prevent pollution from vehicle exhaust, protect the ecological environment, and ensure human health. 2. The European Union has been implementing these standards since 2009, which impose stricter limits on nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter emitted by motor vehicles. 3. From China 1 to China 4, each upgrade in the standard reduces single-vehicle pollution by 30% to 50%.

18

3

Share

What is the fuel consumption of the Porsche Cayenne?

What does 'set' mean in a car?

What car is Hover?

What is the length of the Honda Accord?

How often should the spark plugs be replaced in a BMW B48 engine?

What is the fuel consumption of Dongfeng Fengguang 580 Pro?

In which year did China 5 vehicles start?

Does the Jetta have a rear anti-collision beam?

What Causes the Car Window to Roll Down Automatically?

Where is the trunk button on a Chevrolet?

What engine is used in the Honda XRV?