What is the fuel consumption of the Mazda6 Atenza 2.5?

1 Answers
LeFinn
07/29/25 7:49pm
This model has a fuel consumption of 8.6 liters per 100 kilometers, which is quite impressive. Additional information about the Mazda6 Atenza is as follows: 1. Model: The Mazda6 Atenza is a sporty B-segment sedan under the Mazda brand. 2. Configuration: This vehicle is equipped with two types of engines: a 2.0-liter naturally aspirated engine and a 2.5-liter naturally aspirated engine. 3. Dimensions: The Mazda6 Atenza has a wheelbase of 2830 mm, with a length, width, and height of 4870 mm, 1840 mm, and 1445 mm, respectively. Both the 2.0-liter and 2.5-liter naturally aspirated engines feature Mazda's Skyactiv technology. 4. Performance: The 2.0-liter naturally aspirated engine delivers 158 horsepower and a maximum torque of 202 Nm. This engine reaches its maximum power at 6400 rpm and its maximum torque at 4000 rpm. It is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a 6-speed automatic transmission. The 2.5-liter naturally aspirated engine produces 192 horsepower and a maximum torque of 252 Nm. Its maximum power is achieved at 6100 rpm, and maximum torque at 3250 rpm. This engine also features direct fuel injection technology and an aluminum alloy cylinder head and block.
Was this review help?
20
4
Share
More Forum Discussions

What does the National V vehicle emission standard mean?

It refers to the National Phase V emission standard. Below is a relevant introduction to the National Phase V emission standard: 1. The National Phase V standard, also known as the 'National Fifth Stage Motor Vehicle Pollutant Emission Standard,' has an emission control level equivalent to the European Union's currently implemented Phase 5 emission standard. The EU has been enforcing this standard since 2009, imposing stricter limits on motor vehicle emissions such as nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter. From National Phase I to National Phase IV, each upgrade in the standard reduces single-vehicle pollution by 30% to 50%. 2. In 2012, Beijing planned to implement the National Phase V standard. Once fully enforced, it means that vehicle models failing to meet this emission standard would be prohibited from being sold in Beijing. Previously, to control motor vehicle pollution, Beijing had consistently implemented national standards ahead of schedule. To support the implementation of the National Phase V emission standard, Beijing will further improve fuel quality to align with the National Phase V requirements.
3
4
Share

What are the overall dimensions of the Geely Emgrand?

Geely Emgrand has a length, width, and height of 4725/1802/1478mm respectively. Here is some related information about the Geely Emgrand: 1. Emgrand adheres to the brand proposition of 'Excellence, Stability, and Prestige,' representing Geely Automobile's development direction in safety, energy efficiency, and environmental protection. 2. It both inherits and breaks through Geely's existing models. While Geely's current models still follow multinational corporations, Emgrand's models will play the role of surpassing them. 3. By integrating global resources, it provides consumers with the safest and most environmentally friendly independent high-end sedan with the most competitive cost-performance ratio. 4. The Emgrand brand has an efficient marketing management team with experience in management and marketing, offering high-quality services to dealer partners with a scientific, rigorous, thoughtful, and responsible attitude.
2
0
Share

Where is the thermostat located in the Wuling Hongguang 1.2 engine?

The thermostat of the Wuling Hongguang 1.2 engine is located at the junction between the upper water pipe and the cylinder head. The thermostat is a valve that controls the flow path of the coolant. The Wuling Hongguang is a microvan model under SAIC-GM-Wuling. Taking the 2020 Wuling Hongguang as an example, its body dimensions are: length 4390mm, width 1660mm, height 1750mm, with a wheelbase of 2720mm and a fuel tank capacity of 50 liters. The 2020 Wuling Hongguang is equipped with a naturally aspirated engine, delivering a maximum power of 56kW and a maximum torque of 110Nm, with the maximum torque appearing at 3000 to 4000 rpm. It is paired with a 5-speed manual transmission.
7
5
Share

Is the BMW X3 an Imported Car?

Before 2018, the BMW X3 was basically an imported car, but starting from 2018, the BMW X3 began to be produced domestically in China. Here is the relevant introduction about the BMW X3: 1. Body dimensions: The length, width, and height are 4717mm, 1891mm, and 1689mm respectively. The wheelbase is 2864mm. 2. Powertrain: Equipped with a 2.0L turbocharged 4-cylinder B48B20C engine, using 95-octane fuel, and paired with an 8-speed automatic transmission. 3. Chassis: The drivetrain is front-engine four-wheel drive, with a front suspension featuring a double-joint spring strut front axle and a rear multi-link independent suspension.
6
1
Share

Does the dash cam still work when the car is turned off?

The dash cam will stop working when the car is parked, but a small number of dash cams will continue to operate. Here is relevant information: 1. Whether it works depends on which vehicle wire the dash cam is connected to. Some factory-installed dash cams are connected to constant power, in which case they won't automatically turn off and can record 24/7. If connected to ACC, it will automatically shut off when the engine is turned off. 2. A dash cam is a device that records images, sounds, and other relevant information during vehicle operation. After installation, it can record the entire driving process in video and audio, providing evidence for traffic accidents. For those who enjoy self-driving tours, it can also be used to document the process of overcoming difficult and dangerous roads.
2
5
Share

How many cylinders does the Lynk & Co 05 engine have?

The Lynk & Co 05 is equipped with a four-cylinder engine. Here are some details about the Lynk & Co 05: 1. In terms of power, the Lynk & Co 05 comes standard with the Drive-E series 2.0TD high-power engine. For the transmission system, it is paired with an Aisin 8-speed automatic transmission, sharing the same powertrain as the performance model Lynk & Co 03+. 2. The 2.0T turbocharged engine in the Lynk & Co 05 delivers a maximum power of 187 kW and a maximum torque of 350 N·m, achieving a 0-100 km/h acceleration time of just 6.7 seconds, providing drivers with an acceleration experience that surpasses its class. The car's 100-0 km/h braking distance reaches sports car levels, further enhancing driving safety. 3. Thanks to the engine's lightweight design, the vehicle also features an advanced thermal management system, an intelligently controlled electric water pump, and fuel secondary injection technology, comprehensively improving fuel efficiency and achieving the dual advantages of low fuel consumption and low emissions.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.