What is the fuel consumption of the Lexus LX570?

Can I refuel if the vehicle is transferred but the gas cylinder is not?

If the vehicle is transferred but the gas cylinder is not, refueling is not allowed. Article 14 of the "Road Traffic Safety Law of the People's Republic of China" stipulates that the state implements a compulsory scrapping system for motor vehicles. Based on the safety and technical conditions of the vehicle and its intended use, different scrapping standards are set. Motor vehicles that should be scrapped must undergo deregistration promptly. Vehicles that meet scrapping standards are prohibited from being driven on roads. Large passenger vehicles, trucks, and other commercial vehicles that are to be scrapped must be dismantled under the supervision of the traffic management department of the public security authority. Relevant information about annual inspections is as follows: Annual inspection for modified vehicles: The gas cylinders installed in modified vehicles must undergo annual inspections on time. For this, you need to prepare the documentation of the gas cylinder certification and the special equipment safety application motor vehicle registration certificate in advance. At the annual inspection window, collect the annual inspection form, fill it out, and submit copies of your ID card, the gas cylinder certification, the special equipment safety application motor vehicle registration certificate, and the application form to the staff. Then wait for the staff to inspect the gas cylinder. Annual inspection requirements: For gas cylinders installed on motor vehicles, small cars must comply with the high-pressure gas cylinder standards for liquefied natural gas vehicles. The regulations for gas cylinders state that those in use for less than 15 years must be inspected every three years; those in use for 15 to 20 years must be inspected every two years; and those in use for over 20 years must be inspected annually.

5

3

Share

What Causes Bubbling in Factory Automotive Paint?

Bubbling in factory automotive paint can be caused by: 1. Poor paint quality: This issue frequently occurs at roadside repair shops that offer extremely low prices for paint jobs, often using low-quality paint. The resulting finish quality is predictably subpar. 2. Inadequate construction conditions and processes: Paint application requires strict technical conditions. The surface must be completely moisture-free before painting; filler compounds (putty) must thoroughly dry in a controlled environment before entering the paint booth; the air supply system for spray guns must remain absolutely dry. Any moisture in these processes can lead to paint bubbling. 3. Excessive paint thickness: Careless application or unskilled technicians may apply paint too thickly, causing runs. If subsequent polishing isn't properly executed, this creates conditions for future paint bubbling.

6

4

Share

Is it necessary to go to the 4S store where the car was purchased for the first maintenance?

It is not mandatory and can be done at any store. The following is relevant information about the first maintenance: 1. Concept: The first maintenance of a car refers to its initial service, usually recommended at 5,000 kilometers/6 months. 2. Notes: The engine has a break-in period with a new car. Different brands and models of cars come with different engines. Some engines use special technology and have strict requirements for engine oil. Some engines are made of special materials with high precision, resulting in relatively less wear. In addition to changing the engine oil and oil filter, the first maintenance includes a comprehensive inspection and diagnosis of the vehicle's condition and usage. Typically, the first maintenance service is free.

3

1

Share

How to Fix a Broken USB Port in the Car?

If the USB port in your car is broken, it might be due to a disconnected wire or a detached solder joint. It is recommended to visit a 4S shop or an auto repair shop for repair or replacement. The car USB port is an external bus standard used to connect external devices, such as charging your phone, playing music from a USB drive, powering devices like radar detectors and dash cams, or using car USB lighters and USB vacuum cleaners. USB, short for Universal Serial Bus, is a serial bus standard that connects computer systems to external devices. It is also a technical specification for input/output interfaces, widely used in personal computers, mobile devices, and other information communication products, extending to photography equipment, digital TVs, and gaming consoles.

15

3

Share

What is the function of the radiator?

The radiator is a component of the automobile engine and the main part of the car's cooling system. Its function is to dissipate heat and maintain the engine's temperature. The following is a related introduction about the radiator: 1. Concept: The car radiator, also known as the heat exchanger, is the main component of the car's cooling system. Its function is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to dissipate the heat, and then returns to the water jacket for circulation, achieving temperature regulation. It is a component of the car engine. 2. Working principle: The radiator is an important part of the water-cooled engine. As a key component of the water-cooled engine's cooling circuit, it can absorb the heat from the cylinder block and prevent the engine from overheating. Due to the high specific heat capacity of water, the temperature rise after absorbing the cylinder block's heat is not significant, so the engine's heat is dissipated through the liquid circuit of the coolant.

5

1

Share

What is the handbrake for?

Its function is to provide resistance to the car when parking, preventing the car from rolling. Below is relevant information about the handbrake: 1. Introduction to the handbrake: The parking brake, commonly known as the handbrake, functions to provide resistance to the car when parking, preventing it from rolling. The parking brake, also referred to as the handbrake or the parking gear in automatic transmissions, locks the drive shaft or rear wheels. The force of the parking brake is much weaker than that of the service brake, just enough to prevent the car from rolling on a slope. 2. Precautions for using the handbrake: Do not pull the handbrake to its highest position, as the cables in the handbrake system include not only steel wires but also nylon ropes. If it is always pulled to the highest position, the nylon rope will quickly suffer from material fatigue.

20

1

Share

What is the fuel consumption of the Lexus LX570?

Can I refuel if the vehicle is transferred but the gas cylinder is not?

What Causes Bubbling in Factory Automotive Paint?

Is it necessary to go to the 4S store where the car was purchased for the first maintenance?

How to Fix a Broken USB Port in the Car?

What is the function of the radiator?

What is the handbrake for?

Does a faulty brake vacuum sensor have any impact?

What is the distance for a soft-connection tow truck?

What does BCU stand for in automobiles?

What does the exclamation mark in Volkswagen cruise control mean?