What is the fuel consumption of the Land Rover Range Rover?

3 Answers
LaElliott
07/23/25 5:16pm
There are currently 8 available models of the Land Rover Range Rover. Among them, the 2022 5.0 SC V8 565PS SVA Dynamic Edition and the Autobiography Ultimate Long Wheelbase Edition are equipped with a 564-horsepower engine, with an NEDC fuel consumption of 12.9L per 100km. The 2022 3.0 L6 400PS Autobiography Long Wheelbase Classic Edition and the SVAutobiography Long Wheelbase Edition are equipped with a 400-horsepower engine, with an NEDC fuel consumption of 9.3L per 100km. The 2022 3.0 L6 360PS SE Edition and the Autobiography Edition are equipped with a 360-horsepower engine, with an NEDC fuel consumption of 9.2L per 100km. The fuel tank capacity of the Land Rover Range Rover is 104L. The distance each model can travel on a full tank of fuel is as follows: Models with a 564-horsepower engine can travel 104/12.9*100=806km on a full tank. Models with a 400-horsepower engine can travel 104/9.3*100=1118km on a full tank. Models with a 360-horsepower engine can travel 104/9.2*100=1130km on a full tank. Vehicle fuel consumption is directly related to five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption include: Driving habits: Aggressive driving, such as rapid acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements typically produce more power, requiring more gasoline to burn and perform work. Heavier vehicles also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during a cold start, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, in low temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, further increasing fuel consumption.
Was this review help?
19
3
Share
ReeseDella
08/10/25 12:58pm
I've been driving a Land Rover Range Rover, and as an urban commuter, the fuel consumption has left a deep impression on me. In the city with frequent stops and starts, numerous red lights, and constant acceleration, a full tank of gas burns out quickly, with an average fuel consumption of about 17 to 20 liters per 100 kilometers. During peak hours, it can even rise to around 22 liters. On the highway, it's better, dropping to around 14 liters, and even more economical with cruise control. The car is heavy and powerful, and turning on the air conditioning significantly increases fuel consumption, especially during summer traffic jams when the fuel costs add up quickly. I recommend regular maintenance to keep the engine efficient, checking tire pressure to reduce resistance, and adopting a gentle driving style—smooth starts and gradual braking, avoiding flooring the accelerator. This can save a lot on fuel expenses in the long run and also make the car more durable.
Was this review help?
16
3
Share
Expand All
WestonLee
09/22/25 7:22am
When it comes to fuel consumption for large SUVs like the Range Rover, it really depends on the specific circumstances. Based on my experience, the gasoline-powered Range Rover averages around 18 liters per 100 kilometers in the city, dropping to 14 liters on the highway. However, actual consumption can vary significantly depending on driving style, road conditions, and vehicle age. The engine type makes a notable difference—diesel versions are more fuel-efficient, typically ranging between 10 to 12 liters, while plug-in hybrid models perform even better, consuming minimal fuel in pure electric mode. Don’t overlook the impact of vehicle weight; carrying a full load or adding a roof box will increase fuel usage. Additionally, regular maintenance of air filters and spark plugs helps keep the engine in good condition. Using air conditioning in summer consumes slightly more fuel than in winter, so adjusting driving habits seasonally can save money. Anticipating road conditions to avoid sudden braking and utilizing ECO mode can also enhance fuel efficiency.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

How Many Car Spark Plugs Should Be Replaced at Once?

Spark plugs should be replaced all at once. The discharge gap between new and old spark plugs differs, as does their resistance. Not replacing all of them may lead to issues like engine shaking, difficulty accelerating, and increased fuel consumption. Spark plugs have a certain lifespan, and products from the same batch should have similar quality and longevity. If one or two spark plugs show problems, it indicates that the others are nearing the end of their lifespan as well. Spark plugs, commonly known as sparkers, function by discharging the high-voltage pulse electricity sent through the high-tension leads, breaking down the air between the two electrodes to generate a spark, thereby igniting the air-fuel mixture in the cylinder. The main types of spark plugs include standard spark plugs, projected insulator spark plugs, electrode spark plugs, seat spark plugs, pole spark plugs, and surface gap spark plugs.
1
0
Share

What does Rear mean on car air conditioning?

Rear on a car's air conditioning system generally refers to the rear windshield defogger. Pressing this button can remove fog from the rear windshield. Below is an introduction to the car air conditioning system: 1. Introduction: The car air conditioning system is a device that cools, heats, ventilates, and purifies the air inside the vehicle compartment. It provides a comfortable environment for passengers, reduces driver fatigue, and improves driving safety. 2. Classification by drive method: Divided into independent type (uses a dedicated engine to drive the compressor, with large cooling capacity and stable operation, but high cost, large size and weight, mostly used in large and medium-sized buses) and non-independent type (the air conditioning compressor is driven by the car engine, with cooling performance significantly affected by engine operation and poor stability, mostly used in small buses and cars).
12
2
Share

What Causes the Sizzling Sound from the Rear Wheels?

The reasons for the sizzling sound from the rear wheels: 1. Worn brake pads: One possible reason is severely worn brake pads. Thinner brake pads can produce metallic noises during operation, which not only affect driving comfort but also impact the vehicle's braking performance. Therefore, it's necessary to visit a 4S shop for repair or replacement. 2. Debris in the brake disc: Another possible cause is debris, such as small stones or broken nails, entering the brake disc, which can also create abnormal noises while driving. 3. Deformed brake pad shield: If the brake pad shield is deformed, it may rub against the rotating tire during driving, producing abnormal noises. In such cases, promptly visit a repair shop for inspection, repair, or replacement.
8
4
Share

What does the NCD fault code mean?

NCD fault code refers to the NCD fault light, which is an indicator of the driver alarm system. The following are the reasons for the NCD fault light to illuminate: 1. Urea concentration: Adding unqualified urea, with concentration too high or too low, or diluting urea with water can all trigger a urea quality fault. The NCD light will be steadily yellow, and if the engine runs for more than 10 hours, the engine torque will be limited to 75%. 2. EGR valve sticking: When the EGR valve sticks, the NCD light will be steadily yellow, and if the engine runs for more than 36 hours, the engine torque will be limited to 75%.
17
0
Share

Should the Handbrake Be Engaged When in N Gear?

Engaging the handbrake is necessary when in N gear. Below is a relevant introduction about gear positions: Straight-line gear positions are easy to engage: This gear design is very common, and many brands of automatic transmission vehicles currently use this type. The advantage of this straight-line gear design is that shifting is relatively straightforward, while the disadvantage is that it's easy to engage the wrong gear when operating blindly. Staggered gear positions are not easy to engage: Staggered gear positions, also known as serpentine gear positions, are another very common design for automatic transmission gear positions. Their advantages and disadvantages are exactly the opposite of straight-line gear positions. The advantage is that it's not easy to engage the wrong gear, while the disadvantage is that the operation is not as direct as with straight-line gear positions.
8
1
Share

What is the difference between Michelin 3st and 4st?

Introduction to the differences between Michelin 3st and 4st: 1. Different drainage performance. Michelin Primacy 4 features a new tread design through Evergrip technology, increasing drainage space by over 50% compared to 3st, providing excellent drainage that significantly reduces hydroplaning. 2. Different rubber compound. Compared to 3st, Michelin Primacy 4 adopts a new tread design and new rubber compound, improving wet braking performance and rolling resistance for both new and worn tires. 3. Different safety performance. Due to the new rubber compound, Michelin 4th generation boasts excellent braking performance, with particularly outstanding wet braking. Official data shows that Michelin Primacy 4 outperforms 3st by a full 2.4m in wet braking distance, enhancing driving safety to some extent.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.