What is the fuel consumption of the JAC Heyue RS18 manual?

2 Answers
DelJessica
07/25/25 9:38am
The fuel consumption of the JAC Heyue RS18 is 8.9 liters per 100 kilometers. The actual fuel consumption of a car depends on various factors, such as engine displacement, road conditions, driving habits, tire pressure, and oil quality. The specific explanations are as follows: 1. Engine Displacement: The larger the engine displacement, the higher the fuel consumption. 2. Road Conditions: Starting a car from a standstill requires significant acceleration, during which the engine needs to output substantial power. Frequent starts from a standstill will result in higher fuel consumption. When driving in congested traffic, the engine often operates at idle. During idle, the car's mileage does not increase, but the engine continues to consume fuel, leading to higher fuel consumption per 100 kilometers. 3. Driving Habits: Personal driving habits significantly impact fuel consumption. To maximize fuel efficiency, it is essential to maintain a steady speed while driving and avoid unnecessary overtaking. 4. Tire Pressure: If the tire pressure is below the standard level, the contact area of the tires increases, leading to more friction. This not only causes wear on the tire shoulders but also increases fuel consumption. 5. Oil Quality: Using low-quality oil can result in the formation of carbon deposits due to unsaturated hydrocarbons and colloidal impurities under high temperatures. These deposits roughen the intake pipe walls, affecting the intake efficiency and the quality of the air-fuel mixture, which can drastically increase fuel consumption.
Was this review help?
4
2
Share
VanKinsley
08/11/25 7:25pm
I've been driving a JAC Heyue RS18 manual transmission for over three years, mostly in urban and highway conditions, with an average fuel consumption of around 8 to 9 liters per 100 kilometers. In city traffic jams, it might jump to 10 liters, but on the highway, it can drop to about 7.5 liters. The key is to develop good habits, such as avoiding sudden acceleration and braking, and regularly checking tire pressure and air filters, which can all help save fuel. Also, I use 92-octane gasoline, which is not expensive, and my monthly fuel cost is about 500 yuan, making it suitable for daily commuting and short trips. If you drive more aggressively or encounter poor road conditions, fuel consumption might be higher, so it's advisable to estimate based on your driving style. Overall, this car is quite economical, with simple maintenance, and with a little effort, you can keep fuel costs under control.
Was this review help?
2
2
Share
Expand All
More Forum Discussions

How to spray windshield washer fluid on Mercedes-Benz C200?

To spray the windshield washer fluid on a Mercedes-Benz C200, simply locate the silver button on the left-hand stalk behind the steering wheel and press it firmly to activate the washer fluid spray along with the wipers. Windshield washer fluid, commonly known as car windshield cleaning fluid, is a consumable item in automotive use. Here are some considerations when choosing windshield washer fluid: 1. For autumn and winter seasons, the washer fluid should have excellent cleaning and antifreeze properties; winter washer fluid should be selected based on its antifreeze performance, with a freezing point at least 10°C below the local minimum temperature. 2. Choose according to the local temperature, as reputable brands categorize their products into different levels based on temperature ranges, allowing for seasonal selection.
3
3
Share

How to Use the Auto Hold Function in a Manual Transmission Car?

To use the auto hold function in a manual transmission car: With the seat belt fastened and the door closed, the driver simply needs to press the AUTOHOLD button or the button marked with an 'A' when needed. When stopping, pressing the brake will activate the auto hold. To start moving again, shift gears, release the clutch while applying the throttle, and the auto hold function will automatically deactivate. The principle of auto hold is that the controller provides precise parking force through the slope sensor. During startup, the parking control unit calculates information from the clutch distance sensor, clutch engagement speed sensor, and throttle pedal sensor. When the driving force exceeds the running resistance, the parking brake is automatically released, allowing the car to start smoothly.
8
5
Share

What is the method to reset the maintenance light on the Suzuki SX4?

Suzuki SX4 maintenance light reset steps: 1. First, turn on the car's ignition switch, and the LCD display in the lower right area of the combination instrument panel will show "OIL" for 5 seconds. Within these 5 seconds, press the selection button and hold it for more than 5 seconds. 2. Release the indicator selection button, and quickly press the button 5 times consecutively within 2 seconds; after "OIL" flashes 3 times and then turns off, the reset operation is completed. 3. Additional information: The maintenance light is a reminder function set by the car manufacturer to alert the owner to perform maintenance at certain mileage or time intervals, in the form of an instrument or screen message or indicator light.
14
2
Share

How to Solve the P2138 Fault?

p2138 fault solution: Focus on inspecting the throttle body, and replace it with a new one if necessary. The P2138 fault code indicates that there is a problem with the throttle or accelerator pedal position sensor. The possible causes of this phenomenon are: 1. The throttle body itself is faulty or the accelerator pedal position sensor is not working properly; 2. A fault in the wiring related to the throttle body to the accelerator pedal position sensor. The throttle body is one of the important components of today's fuel-injected engine systems. Its upper part connects to the air filter, and the lower part connects to the engine block, serving as the throat of the car engine. Whether the car accelerates smoothly is closely related to the cleanliness of the throttle body. Cleaning the throttle body can reduce fuel consumption and make the engine more responsive and powerful.
13
0
Share

How to Adjust the Focus Seat?

How to adjust the Focus seat: 1. Under the front of the seat, there is usually a metal crossbar. Lift it up and then adjust the seat forward or backward to the desired position; 2. The handle is on the left side of the seat. Pull it up to raise the seat and press it down to lower the seat; 3. The backrest adjustment handle is located at the lower left of the seat backrest. Pull it forward to adjust. The Focus is a Ford A-segment family car with a length, width, and height of 4647 mm, 1810 mm, and 1468 mm respectively, and a wheelbase of 2705 mm. In terms of suspension, the Focus features a MacPherson strut front suspension and a torsion beam rear suspension.
10
1
Share

How to Replace the Cabin Air Filter on Changan CS35?

The method for replacing the cabin air filter on Changan CS35 is as follows: Locate the fixing buckle on the right side of the glove box and pull it outward with force. After removing the glove box, you will see the cabin air filter cover. Press the fixing buckles on both sides of the cover firmly to remove it. Pull out the old cabin air filter to the outside, install the new one, and then reassemble everything in reverse order. The dimensions of Changan CS35 are 4170mm in length, 1810mm in width, and 1670mm in height, with a wheelbase of 2560mm. In terms of configuration, Changan CS35 comes standard with features such as parking sensors, power windows, and an LCD display. Higher trim models are equipped with a power sunroof, automatic air conditioning, and a multifunction genuine leather steering wheel.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.