What is the fuel consumption of the Haval H5?

1 Answers
ChloeLynn
07/30/25 1:25am
Haval H5 gasoline version has a fuel consumption of 10.3 liters per 100 kilometers, while the diesel version consumes 8.3 liters per 100 kilometers. Impact of driving habits on fuel consumption: Poor driving habits lead to higher fuel consumption. Habits such as prolonged idling, sudden acceleration and braking, shifting at excessively high or low RPMs, frequent speeding or extremely slow driving are major contributors to increased fuel consumption. Engine fuel consumption during idle parking is much higher than during normal driving. Therefore, it is best to turn off the engine when the vehicle is not in use for extended periods, such as waiting for someone during long stops. While driving, gentle and smooth driving techniques are the most fuel-efficient. Avoid stomping on the accelerator during starts; smooth acceleration and maintaining a steady speed are the most fuel-efficient. Impact of low-quality gasoline on fuel consumption: Using low-quality gasoline directly affects fuel consumption. If low-quality gasoline is used for an extended period, it produces more impurities compared to standard-quality gasoline, which can more easily clog the fuel system, leading to incorrect air-fuel ratios, overly rich mixtures, and incomplete combustion before exhaust, resulting in increased fuel consumption. Therefore, when conditions permit, it is advisable to refuel at reputable gas stations.
Was this review help?
6
0
Share
More Forum Discussions

What is the reason why the Audi A3 has no sound and is always muted?

Audi A3 has no sound and is always muted for the following reasons: 1. Circuit failure; 2. Pressing the mute button. Taking the 2021 Audi A3 as an example, it belongs to the compact car category, with body dimensions of: length 4351mm, width 1815mm, height 1458mm, wheelbase 2630mm, fuel tank capacity 51l, and curb weight 1400kg. The 2021 Audi A3 features a front McPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4l turbocharged engine, delivering a maximum horsepower of 150ps, maximum power of 110kw, and maximum torque of 250nm, paired with a 7-speed dual-clutch transmission.
5
1
Share

How to Obtain the Inspection Exemption Label in the Ninth Year?

The method to obtain the inspection exemption label in the ninth year is: Open the Traffic Management 12123 app, enter the business selection page, under the motor vehicle business, select 'Apply for Inspection Exemption Label for Exempt Vehicles', complete the vehicle information filing as required, and then submit the application. The label can be mailed or picked up in person. For private cars and minivans, except for those exceeding 6 years but less than 10 years, the annual inspection cycle is adjusted to once every two years. This means the 6th and 8th years require on-site inspections, while the remaining 7th and 9th years do not require on-site inspections. Inspection exemption does not mean no inspection is needed. Inspection exemption refers to vehicles that meet the standards within 6 years of registration, exempting them from on-site inspections during the biennial regular inspections. However, owners must still apply for the electronic inspection qualification label on time through the Traffic Management 12123 app.
1
4
Share

What to Do When the Car Door Won't Open Due to a Dead Battery?

Methods to open the car door when the battery is dead include: 1. Using jumper cables to connect to another car's battery for a jump start; 2. Removing the battery for charging and then opening the door; 3. Using the mechanical key to open the door. If the battery is completely dead, short-term driving won't fully recharge it—prolonged charging is necessary to restore its capacity. The working principle of car door locks involves turning the key to convert mechanical energy into gear movement, thereby opening or closing the door. The basic components of a mechanical door lock mainly include the door lock switch, door lock actuator, and door lock controller. Remove the battery and take it to a battery shop for charging.
15
1
Share

What to Do When the Car Handbrake Doesn't Release in Winter?

The solution for a car handbrake not releasing in winter is: you need to use the engine idle speed to heat the brake pads. The correct method to apply the handbrake is: 1. Press the handbrake button before pulling it; 2. Apply the handbrake gently; 3. Pull the handbrake to about 70% of its full range, as pulling it all the way to the top will shorten the lifespan of the handbrake cable. The function of the handbrake is to provide braking when parking on flat ground or slopes, preventing the vehicle from moving automatically when unattended and avoiding traffic accidents. The dangers of driving without releasing the handbrake are: 1. The brake pump cannot provide sufficient braking force, causing the engine to stall; 2. Accelerated wear of the brake disc and hardening of the brake pads due to friction heat; 3. Stretching of the handbrake cable; 4. Leakage of brake cylinder oil, leading to brake failure.
13
0
Share

What to do if points are deducted from a B2 driver's license and not handled for more than 30 days?

The solution for overdue handling of points deducted from a B2 driver's license for more than 30 days is: Go to the traffic management department of the public security organ to handle the business of studying for deducted driving points. The vehicle types that a B2 driver's license can drive are heavy-duty, medium-duty trucks or large, heavy, and medium-duty special operation vehicles. Heavy-duty and medium-duty trucks are mostly trucks. The permitted driving types of a B2 license also include all vehicle types permitted by C1, C2, C3, C4, and M, including small and micro passenger vehicles, three-wheeled vehicles, wheeled self-propelled machinery, and light, small, and micro steering operation vehicles. The process for the B2 test is: 1. Apply to the vehicle management office for a B2 driver's license test; 2. Receive and fill out the application form, and submit the application form, ID card, and physical condition certificate to the staff for review; 3. After passing the review, you can go to the driving school arranged by the vehicle management office to complete the registration procedures and participate in learning and tests.
4
0
Share

How to Solve the Bumpy Noise of Panoramic Sunroof?

Solutions for bumpy noise in panoramic sunroofs vary depending on the situation: 1. Noise caused by friction between the sunroof glass seal and the roof metal plate: You can spray some dashboard wax on the external seal position or clean the seal position thoroughly and apply some hand cream. 2. Noise caused by loose internal decorative panels: It can be resolved by inserting non-woven fabric. Maintenance methods for panoramic sunroofs include: 1. Regularly clean the mechanical parts of the sunroof with engine oil or lubricant. 2. Clean the surrounding tracks periodically to prevent sand accumulation and extend the lifespan of the sunroof seal. 3. Before opening the sunroof, check for any obstacles on the roof that may hinder the movement of the glass panel.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.