What is the fuel consumption of the GW250?

1 Answers
VanSophia
07/24/25 10:15am
The comprehensive fuel consumption of the GW250 is basically around 3.5L per 100 kilometers. The actual fuel consumption may vary slightly depending on each individual's driving habits and skills. More stable driving habits result in lower fuel consumption, while aggressive driving behaviors such as frequent high-speed overtaking can appropriately increase the fuel consumption. Below are some methods to reduce fuel consumption: 1. Check the air conditioning system in summer: Air conditioning malfunctions are a significant cause of high fuel consumption. Poor cooling performance may lead to increased fan speed and lower temperature settings to achieve a cooler effect. 2. Frequent hard braking: Frequent hard braking is a major factor contributing to high fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid excessive use of air conditioning in small-displacement vehicles: For vehicles exposed to the sun, it is not advisable to turn on the air conditioning immediately upon entering. First, open the windows and set the fan to a higher speed without turning on the air conditioning to expel the hot air inside the vehicle. After the vehicle has cooled down moderately, then turn on the air conditioning.
Was this review help?
10
3
Share
More Forum Discussions

What are the reasons for the sudden blackout of the Changan Eado screen?

The reasons for the sudden blackout of the Changan Eado screen are: 1. The fuse behind the display screen and navigation is blown; 2. The backlight of the central control is damaged; 3. The battery power is insufficient. Taking the 2020 Changan Eado as an example, it belongs to a compact car with body dimensions of 4730mm in length, 1820mm in width, and 1505mm in height, a wheelbase of 2700mm, a fuel tank capacity of 53 liters, and a trunk capacity of 500 liters. The 2020 Changan Eado is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 158PS, a maximum power of 116kW, and a maximum torque of 260Nm, paired with a 7-speed dual-clutch transmission.
20
2
Share

What are the three categories of new energy vehicles?

New energy vehicles include three major types: Hybrid Electric Vehicles (HEV), Battery Electric Vehicles (BEV, including solar-powered vehicles), and Fuel Cell Electric Vehicles (FCEV). The following is a related introduction about new energy vehicles: 1. Introduction: New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new on-board power devices), integrating advanced technologies in vehicle power control and driving, resulting in vehicles with advanced technical principles, new technologies, and new structures. 2. National subsidies: China is one of the first countries to implement financial subsidy policies for new energy vehicles. From 2013 to 2015, the central and local governments provided a total of 48.444 billion yuan in subsidies, greatly promoting the rapid development of the new energy vehicle industry. China's new energy vehicle ownership was less than 500 units before 2009 and had grown to 583,200 units by the end of 2015.
19
3
Share

How to Operate the Gear Shift of Lynk & Co 03?

The operation method of the Lynk & Co 03 gear shift is as follows: simply push the gear lever. The electronic gear lever has the reverse gear at the top; pushing the lever forward will engage reverse for backing up, while pushing it backward engages the drive gear for moving forward. The parking gear is a button. Taking the 2021 Lynk & Co 03 as an example, its body dimensions are: length 4639mm, width 1840mm, height 1472mm, with a wheelbase of 2730mm and a fuel tank capacity of 50 liters. The 2021 Lynk & Co 03 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 156PS and a maximum power of 115kW, with the maximum power speed at 5600rpm. It is paired with a 6-speed manual transmission.
5
2
Share

Where to Find the Tire Pressure Monitoring Settings in Audi A6?

Audi A6's tire pressure monitoring settings can be accessed through the MMI control panel. The steps are as follows: 1. Press the CAR menu button; 2. Use the selection button to bring up the Tire Pressure Monitoring System; 3. Select the relevant settings after entering. Taking the 2020 Audi A6 Luxury Dynamic model as an example, its body dimensions are: length 4951mm, width 1886mm, height 1483mm, with a fuel tank capacity of 73 liters and a trunk capacity of 1680 liters. The 2020 Audi A6 Luxury Dynamic model features a multi-link independent suspension for both front and rear suspension. It is equipped with a 2.0T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 190PS, a maximum power of 140kW, and a maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
1
4
Share

Where is the handbrake in a BMW?

BMW handbrake is located next to the gear lever. Its function is to pull it upward when parking to keep the car stationary and prevent it from rolling. Precautions for using the handbrake: 1. Avoid pulling it too tight to prevent system damage; 2. Avoid parking on long-term slopes with the handbrake; 3. Do not pull the handbrake during high-speed driving; 4. Release the handbrake before starting the car. Taking the 2020 BMW X5 as an example, its front suspension is a double-wishbone independent suspension, and the rear suspension is a multi-link independent suspension. The 2020 BMW X5 is a mid-to-large-sized SUV with body dimensions of: length 4930mm, width 2004mm, height 1776mm, a wheelbase of 2975mm, and a fuel tank capacity of 83 liters.
11
0
Share

What vehicles cannot be driven with an A1 license?

A1 driving license does not permit the operation of full trailers, semi-trailer tractors, motorcycles, or electric vehicles, including both tram and trolleybus. Additionally, it does not allow driving special vehicles, such as small automatic transmission passenger cars designated for disabled individuals. Such vehicles can only be driven by individuals with lower limb disabilities (right or both) who hold a C5 driving license. Requirements for applying for an A1 license: 1. Age requirement: Applicants must be between 22 and 60 years old. 2. Vision and height requirements: Uncorrected or corrected visual acuity must reach 5.0 or above on the logarithmic visual acuity chart, and height must be at least 155 cm. 3. Other requirements: Applicants must have held an A3 or B1 license for at least five years with no record of accumulating 12 penalty points in any five consecutive scoring periods. Alternatively, they must have held a B2 license for at least three years with no record of accumulating 12 penalty points in any three consecutive scoring periods.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.