What is the fuel consumption of the Great Wall M6?

2 Answers
McJohnny
07/30/25 1:25am
2019 Haval M6 has a real fuel consumption of around 9L/100km. As a compact SUV under the Haval brand, the Haval M6 is equipped with a 1.5T turbocharged engine across the entire lineup, with exhaust emissions meeting the China VI emission standards. It features high configuration, spacious interior, and strong safety. Here is additional information: Introduction to Haval: The Haval M6 basically continues the excellent performance of the old H6 in terms of body size. The length, width, and height of the body are 4649/1830/1705mm respectively, with a wheelbase of 2680mm. The rear seats of the M6 can be folded down in a 4/6 ratio. The trunk itself has a volume of 808L, which can be expanded to 2010L when all seats are folded down, meeting consumers' travel and large space loading requirements.
Was this review help?
4
0
Share
AmaraDella
08/15/25 7:05am
I've been driving the Great Wall M6 for over two years now, and I personally find its fuel consumption quite stable. For daily city commuting, it averages around 9L, rising to 10L during peak traffic jams. But on weekend highway trips, it's very fuel-efficient, easily dropping to 7.5L or lower. Its spacious interior is perfect for family use, making it convenient for school runs and shopping, with fuel costs not being a burden. Regular maintenance like oil changes and air filter replacements helps keep fuel consumption within a reasonable range, and keeping tire pressure from being too low also helps—these are all things I've learned through experience. Compared to other SUVs my friends drive, the M6 has moderate fuel consumption, low maintenance costs, and is economical and practical to drive.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

How Many Liters of Transmission Fluid Are Needed for a Car Transmission Fluid Change?

Transmission fluid change requires 4-6 liters for manual replacement and 9-12 liters for machine flush replacement. Below are the methods and precautions for changing transmission fluid: Methods for Changing Transmission Fluid: There are two methods for changing transmission fluid: gravity drain and machine flush. The machine flush method is recommended because it can clean the transmission, whereas the gravity drain method only replaces the fluid without cleaning the transmission. Precautions for Changing Transmission Fluid: When changing transmission fluid, it is essential to use the same type of fluid as originally specified for the vehicle. Whether to change the transmission fluid should be determined based on the transmission's operating condition. If the vehicle shifts smoothly and there is no significant change in transmission noise, replacement may not be necessary.
1
1
Share

How Does Electronic Power Steering Work?

Electronic power steering works by having the torque sensor activate when the steering shaft rotates, converting the relative angular displacement between the input and output shafts caused by the torsion bar into electrical signals sent to the ECU. The ECU determines the motor's rotation direction and the magnitude of the assist current based on signals from the vehicle speed sensor and torque sensor, thereby achieving real-time control of power steering. The advantages of the electronic power steering system are as follows: Reduced fuel consumption: There is no steering pump, and the electric motor is only powered when steering is required, minimizing both power consumption and fuel usage. Improved return-to-center characteristics: Utilizing microelectronic technology and software to control the motor's operation allows for the adjustment of design parameters to achieve optimal return-to-center characteristics.
15
4
Share

What are the components of a speedometer?

Speedometer consists of a speed meter that indicates the vehicle's driving speed and an odometer that records the distance traveled by the vehicle. Here are the detailed introductions: Classification of speedometer: Speedometers are divided into three types: purely mechanical, mechanical-electronic, and purely electronic. Currently, the widely used type in domestic vehicles is the purely electronic speedometer. Its principle is to install a speed sensor on the transmission output shaft or wheel, and use the read speed to convert into vehicle speed and mileage through the calculation formula embedded in the control module. Common faults and causes of speedometer: Unstable speedometer pointer is mainly caused by poor flexible shaft, damaged meter, or improper installation of the flexible shaft's locking nut. The flexible shaft, meter should be replaced, or the installation method of the flexible shaft nut should be changed.
17
1
Share

Do LED lights require ballasts?

Most LED headlights do not require ballasts, but in practice, it still depends on the specific vehicle model for detailed analysis. Below is relevant information about ballasts and LED headlights: The function of ballasts: Ballasts, also known as electronic ballasts, primarily function to instantly increase the original 12V voltage to a high voltage of 23,000V and maintain stable high voltage. This high-intensity voltage is used to activate HID bulbs, creating strong light between the two electrodes, enabling the bulb to achieve high-brightness illumination. The principle and advantages of LED headlights: When current passes through a p-type semiconductor and reaches an n-type semiconductor, the LED light emits light. The advantages of LEDs include lower power consumption, no heat generation, robust structure, resistance to vibration, and no significant decrease in light output brightness during use.
8
1
Share

What is the typical RPM when a car reaches 120km/h?

When a car reaches 120km/h, the RPM is typically between 2500-3300, depending on the engine displacement and the manufacturer's power tuning. The relationship between RPM and speed, as well as influencing factors, are as follows: Relationship between RPM and speed: Generally, the higher the engine RPM, the higher the car's speed, showing a proportional relationship. The specific calculation formula is: Speed = RPM × Gear Ratio × Tire Circumference. Influencing factors: Besides RPM affecting speed, the gear ratio of the transmission and the tire circumference also influence speed. Additionally, friction and air resistance are significant factors. It's worth noting that once the engine reaches its rated power, even if the RPM increases, the speed will not increase because the onboard computer will cut off the fuel supply.
9
1
Share

Can I switch back to 95 after adding 98 gasoline?

It is possible to switch back to 95 after adding 98. Here are some relevant details about gasoline octane ratings: 1. Density of different octane ratings: Gasoline with different octane ratings has varying densities. The most common are 92 and 95 octane gasoline. The density of 92 octane gasoline is approximately 0.72g/ml, while 95 octane gasoline has a density of about 0.725g/ml, and 98 octane gasoline has a density of around 0.737g/ml. 2. Octane rating: Higher-octane gasoline contains more additives, and the density of these additives is greater than that of the base gasoline. Therefore, the higher the octane rating, the greater the density of the gasoline.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.