What is the fuel consumption of the Envision?

1 Answers
ONicole
07/29/25 9:19pm
The Buick Envision has a fuel consumption of 6.8L per 100 kilometers. Here is more information about the Envision: 1. Positioning: The Buick Envision is positioned as a midsize SUV with a relatively large body size and ample interior space. 2. Powertrain: The Envision is equipped with two powertrain combinations: a 2.0T SIDI direct-injection turbocharged engine paired with a 9-speed HYDRA-MATIC intelligent transmission, and a 1.5T SIDI direct-injection turbocharged engine paired with a 7-speed DCG intelligent dual-clutch transmission. 3. Power: The 1.5T model has a maximum power output of 124kW (169Ps), while the 2.0T model delivers a maximum power of 191kW (260Ps).
Was this review help?
18
0
Share
More Forum Discussions

How to adjust the rearview mirrors of the Volvo S60?

Volvo S60 rearview mirror adjustment method is: 1. Locate the rearview mirror adjustment switch near the door handle; 2. Press the selection switch L to choose the left rearview mirror adjustment; 3. Press the selection switch R to choose the right rearview mirror adjustment; 4. Press the button left or right to adjust the horizontal angle of the rearview mirror. Taking the 2021 Volvo S60 as an example, its body dimensions are: length 4761mm, width 1850mm, height 1437mm, wheelbase 2872mm, and trunk capacity 391L. The 2021 Volvo S60 is equipped with a 2.0T turbocharged engine, with a maximum horsepower of 163PS, maximum power of 120kW, and maximum torque of 265Nm.
15
3
Share

What is the normal temperature range for the Nissan Teana's coolant temperature gauge?

Nissan Teana's normal operating temperature ranges between 80-90 degrees Celsius. 1、Note: When starting the engine, the coolant temperature gauge reading should not be lower than 50°C; during normal vehicle operation, the proper gauge reading should remain between 70°C~90°C. 2、Effects of overheating on the engine: Thermal expansion of engine components will reduce clearance between moving parts, accelerating engine wear. Overheating also decreases oil viscosity, further increasing component wear and reducing engine lifespan. This may cause cylinder head gasket failure, resulting in cross-contamination between coolant channels, oil passages, and combustion chambers - allowing oil to enter the radiator and coolant to mix with engine oil.
13
3
Share

Which Year's Cars Comply with China IV Emission Standards?

China IV emission standards apply to vehicles manufactured between 2011 and 2017. Below is relevant information about China IV emission standards: 1. Definition: China IV emission standards represent the national fourth-phase limits for motor vehicle pollutant emissions. Major automotive pollutants include hydrocarbons, nitrogen oxides, carbon monoxide, and particulate matter. These standards require controlling and reducing vehicle emissions below specified thresholds through technologies such as improved catalytic converter active layers, secondary air injection systems, and cooled exhaust gas recirculation systems. 2. Existing Issues: While promoting environmental protection and energy conservation remains a key national policy, significant challenges to corporate interests inevitably encounter resistance. As state-owned enterprises, Sinopec and PetroChina cannot be effectively constrained by governmental "standards". Consequently, emission control pressures primarily target more market-oriented automobile manufacturers, which explains why the automotive industry bears disproportionate responsibility for emission compliance.
2
3
Share

How to restart the 2020 Audi MMI?

2020 Audi MMI restart method: Simultaneously press the SETUP button and the button in the upper right corner of the large knob, then press the large knob. MMI is the multimedia interactive system developed by Audi. It ingeniously integrates the operation of all infotainment components in one display and operating system. Through simplified controllers and unified logic, MMI enables quick, convenient, and intuitive access to a wide range of functions and technologies. The Audi A4L is a mid-size car under FAW-Volkswagen Audi. Taking the 2020 35TFSI Fashion Dynamic model as an example, the car features a 4-door, 5-seat sedan structure with body dimensions of 4858mm in length, 1847mm in width, and 1439mm in height, a wheelbase of 2908mm, a fuel tank capacity of 56 liters, and a curb weight of 1610kg.
18
0
Share

Is Lexus Full Lineup Free Maintenance?

Lexus offers free maintenance for its full lineup. Below are the relevant details: 1. Related Policies: All gasoline models under the Lexus brand can enjoy a free warranty and maintenance policy for 4 years or 100,000 kilometers, while hybrid models can enjoy a free warranty and maintenance policy for 6 years or 150,000 kilometers. Moreover, warranty and maintenance services are free at any Lexus 4S dealership nationwide as long as they are within the policy period. This essentially eliminates all concerns about hybrid technology. 2. Note: Lexus provides free semi-synthetic engine oil for maintenance; those who wish to use full-synthetic engine oil will need to pay for it themselves.
14
0
Share

What is the method to reset the maintenance light on a Santana?

Santana maintenance light reset method is: 1. With the ignition switch turned off, press and hold the reset button on the right side of the instrument panel with your left hand while turning on the ignition switch; 2. After turning on the ignition switch, continue holding the reset button with your left hand until the maintenance light enters reset mode, then release the right-hand reset button; 3. Within 20 seconds of releasing the right button, press the left menu button once to confirm the reset. Taking the 2021 Santana as an example, its body dimensions are: length 4475mm, width 1706mm, height 1469mm, wheelbase 2603mm, fuel tank capacity 52.8l, and trunk capacity 466l.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.