What is the fuel consumption of the Changan Ruicheng CC?

2 Answers
BraydenDella
09/07/25 3:49am
The fuel consumption of the Changan Ruicheng CC is 6.7L per 100 kilometers. The vehicle's fuel consumption is related to road conditions, driving habits, driving environment, and vehicle load. If driving on congested urban roads, the actual fuel consumption will certainly be higher than the normal driving consumption. Detailed introduction of the Changan Ruicheng CC: 1. Exterior: The new car features a chrome-plated grille design, with a more integrated front face. The grille is seamlessly connected with the headlights on both sides. The sharp headlight design, combined with the slender lower grille, presents a strong sense of sportiness and a more luxurious and grand appearance. 2. Engine: The Changan Ruicheng CC is equipped with a 1.5T turbocharged engine, with a maximum power of 115kW/5500rpm and a maximum torque of 225N·m/2000-4000rpm. It is paired with a 6MT or the latest Aisin third-generation 6AT transmission. The STT intelligent fuel-saving system also enhances fuel economy. 3. Safety features: The Ruicheng CC also comes with an ACC full-speed adaptive cruise system, PAB pre-collision warning and braking system, LDW lane departure warning system, TSR traffic sign recognition system, 6 airbags, parking radar detection, 360-degree panoramic imaging, ESC electronic stability control system, and more, further enhancing its overall capabilities.
Was this review help?
19
2
Share
LaJourney
09/19/25 3:16am
I've driven many cars, and the Changan Ruicheng CC's fuel consumption is about 6.7 liters per 100 kilometers in the official test, but actual usage varies by driver. During highway cruising, fuel consumption may drop to around 6-7 liters, but in congested urban areas, it can surge to over 8 liters, even approaching 10 liters—especially when using air conditioning or accelerating aggressively. Temperature changes also have an impact; fuel consumption is noticeably higher in hot summers, while in winter, it's slightly lower but consumes more during cold starts. Based on my own tests, maintaining smooth driving and a steady speed can keep fuel consumption within the 7-8 liter range. Regularly checking tire pressure and air filters is crucial, as underinflated tires or dirty filters can increase fuel consumption by 10%. Overall, it's a relatively economical compact car, but good driving habits are key to optimizing efficiency.
Was this review help?
10
1
Share
Expand All
More Forum Discussions

What are the reasons for the failure to register a motor vehicle on 12123?

The reasons why the Traffic Management 12123 cannot register your own motor vehicle include system information delay, the number of vehicle registrations exceeding the maximum limit, and the vehicle already being bound. Below are the detailed explanations and solutions: Information delay: After purchasing a new car, there may be a delay in information synchronization. Generally, you can check the vehicle information on 12123 after waiting for about half a month. If the vehicle information still cannot be found after a long time and registration fails, you should consult the staff at the vehicle management office for detailed assistance. The number of vehicle registrations exceeds the maximum limit: The Traffic Management 12123 has the following requirements for vehicle registration: each user can only register 3 vehicles not under their own name, and the same vehicle can be registered by up to 3 other people besides the owner. If the number of registrations exceeds this requirement, registration will naturally fail. Vehicle already bound: If the original owner has already bound this vehicle during the sale of a used car, you need to ask the original owner to unbind it before you can register it again. There are two ways to register a motor vehicle not under your name: The first method is to scan the QR code of the motor vehicle to be registered, take the required photos according to the displayed instructions, fill in the detailed information, and enter the mobile verification code of the vehicle owner. The second method only requires entering the license plate number, the last 6 digits of the engine number, and the mobile verification code received by the vehicle owner. The system backend will automatically approve the registration.
12
0
Share

What is the current required for car ignition?

During gasoline engine startup, the battery output current can reach 200 to 600 amps, while for diesel engines, it can go up to 1000 amps. Below is relevant information about starting current: 1. Concept: The Cold Cranking Amps (CCA) rating refers to the minimum current obtainable under specific conditions at -17.8°C and -28.9°C. This rating connects the battery's starting capability with important variables such as engine displacement, compression ratio, temperature, starting time, the technical condition of the engine and electrical system, and the minimum operating voltage for starting and ignition. 2. Normal current value: Generally, the starting current is 20 times the operating current. If the battery is weak or not fully charged, or if the low voltage indicator is damaged, this might occur. It is recommended to test the battery voltage after 25 kilometers of driving. For a 48V battery, a reading around 50V indicates normal battery condition.
5
5
Share

What are the inconveniences of having an out-of-town license plate?

Vehicles with out-of-town license plates face many inconveniences locally, such as annual inspections, insurance, and travel, which are more troublesome compared to vehicles with local license plates. Below are the relevant details about the annual inspection for out-of-town license plates: 1. Preparation of documents: To apply for a vehicle annual inspection delegation notice, the owner needs to bring their "Resident ID Card," "Vehicle Driving License," vehicle insurance documents, original and photocopy of the vehicle and vessel tax, and an application for out-of-town annual inspection to the vehicle management office at the registration location. 2. On-site vehicle inspection: Following the standard procedure, after the owner completes the out-of-town delegation of the vehicle annual inspection at the original registration vehicle management office, the office will issue a paper delegation letter to the applicant and send an online delegation notice for the vehicle annual inspection to the delegated vehicle management office.
14
3
Share

Is U-turn allowed in service areas?

The entire expressway does not allow U-turns, whether in service areas or not. To make a U-turn, you must exit at the next interchange and then turn around. Below is some relevant knowledge: 1. Purpose of underground U-turn passages in service areas: Most service areas have underground U-turn passages, primarily designed for cargo transportation between the two sides of the service area. Therefore, in principle, apart from cargo transportation, these passages are only available for highway patrol police and road administration law enforcement personnel on the same expressway, and are not provided for civilian use. 2. Reasons why underground U-turn passages in service areas are not available for civilian use: The main reason is to prevent some drivers from taking chances and exploiting loopholes to evade tolls. Since expressways charge fees based on distance, repeated U-turns can confuse toll calculations, affecting the billing method and creating issues with how to balance the toll fees.
15
4
Share

Is it necessary to replace the filter when performing a transmission fluid flush?

When performing a transmission fluid flush, it is necessary to replace the filter. The transmission filter serves to filter the transmission fluid, thereby extending its service life. Transmission maintenance methods: 1. Check transmission fluid level: Regularly inspect the fluid level in the transmission to ensure it remains within the specified range. Replenish as needed based on actual working conditions, making sure to use the same type of fluid. When changing the fluid, drain the old fluid while the transmission is operating and clean the system. 2. Check transmission condition: During routine maintenance, inspect the condition of all transmission connection points to promptly identify any looseness, wear, or damage. Tighten any loose connections immediately and repair or replace damaged components. Regularly check for oil leaks at the shaft end face seals and external joints, replacing failed seals and gaskets as needed. 3. Structural component maintenance: Daily transmission maintenance should focus on structural components, including gears, bearings, and different shafts. Regularly inspect transmission gears for wear, chipping, or incorrect meshing. Pay special attention to bearing inspection, monitoring for excessive axial or radial clearance and worn spacers.
7
0
Share

Is Headlight Fogging Normal? How to Explain It?

Headlight fogging in cars is usually a normal phenomenon. When the headlights are turned on and during their use, a significant amount of heat is generated. There is a vent rubber tube at the rear cover of the headlight, which is used to release the heat produced after the headlights are turned on. However, moisture in the air can enter the headlight through this tube and attach to the lens. As the moisture accumulates, it forms water droplets that then flow down the lens. Here are the reasons for headlight fogging: 1. Temperature difference: The temperature difference causes moisture in the air to enter the headlight through the vent tube and attach to the lens. As the moisture accumulates, water droplets form and flow down the lens. 2. Human factors: When the vehicle is driven through water or washed, the engine and exhaust system, being significant heat sources, can generate a large amount of steam when water is poured on them. Some of this steam can enter the headlight through the vent tube.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.