···
Log in / Register

What is the fuel consumption of the Auman GTL460 automatic transmission?

4 Answers
SanTeagan
07/30/25 1:02am

The Auman GTL460 automatic transmission consumes approximately 32 liters per 100 kilometers. Reasons for increased fuel consumption: 1. Poor driving habits: A vehicle's fuel consumption is not only related to the car itself but also to the driving conditions and the driver's habits. If you often drive on roads with severe traffic congestion, the fuel consumption will be relatively high. If driving habits are poor, fuel consumption may also increase. 2. Frequent stop-and-go driving: When driving on congested roads, the car often needs to stop and start. Starting from a standstill requires significant kinetic energy, and the engine needs to output substantial power. If frequent stop-and-go driving is necessary, the car's fuel consumption will inevitably rise. 3. Idle conditions: When driving on congested roads, the engine spends some time in idle mode. During idle conditions, the car's driving distance does not increase, but the engine continues to consume fuel, which can also affect the vehicle's fuel consumption per 100 kilometers. If you want to save fuel, the primary task is to change your driving habits: 1. When driving, try to avoid sudden acceleration and deceleration as much as possible, and maintain a steady speed. Only in this way can the car achieve optimal fuel efficiency. 2. In daily use, it is essential to maintain your car regularly to keep it in good condition, which can improve fuel efficiency. During maintenance, always use genuine fluids and parts.

Was this review help?
14
1
Share
StJuliette
08/15/25 6:32am

As a veteran driver who has operated various trucks, I can say the fuel consumption of the Auman GTL460 automatic transmission typically fluctuates between 30 to 40 liters per 100 kilometers. This depends on specific conditions, such as how much cargo you're hauling; when running empty on highways, it can go as low as around 28 liters, while fully loaded climbing hills might peak at over 45 liters. The automatic transmission is indeed more convenient to operate, but it consumes slightly more fuel than manual transmissions, and driving habits have a significant impact—sudden braking or aggressive acceleration can spike fuel consumption by over 10%. Here's a little tip: maintaining steady throttle control and regular engine maintenance (like replacing the air filter every 50,000 kilometers) can save a lot on fuel costs. On highways, cruising at 80 km/h in eco mode is most efficient, and in city traffic, try to avoid frequent stop-and-go situations. Overall, an average of around 33 liters in mixed driving conditions is considered normal, and long-haul transport operators should budget fuel expenses carefully, which is crucial for fleet management.

Was this review help?
20
3
Share
Expand All
LeilaniLee
10/20/25 4:49am

After years of observation in the workshop, I've noticed that the fuel consumption range of the Auman GTL460 automatic transmission is between 29 to 36 liters per 100 kilometers, with engine performance and maintenance condition being the decisive factors. The 460-horsepower diesel engine inherently has high fuel consumption, but if the fuel pump pressure is unstable or the transmission oil isn't changed timely, fuel consumption can increase by more than 5%. The automatic transmission system is designed to simplify operation, but worn friction plates or insufficient cooling can drag down efficiency. I recommend owners regularly check tire pressure (maintain the standard 240kPa) and wheel pair wear, which can reduce rolling resistance. In urban areas with light loads, fuel consumption might reach 35 liters, while on highways with full loads, it could be just over 30 liters. Another potential issue is poor generator efficiency leading to unstable voltage, indirectly increasing consumption; an annual comprehensive diagnostic can prevent faults. Paying attention to these details not only saves fuel but also extends vehicle lifespan, significantly helping to reduce operational costs.

Was this review help?
2
3
Share
Expand All
OAlan
12/03/25 5:21am

Having used the Auman GTL460 automatic transmission for over a year, the average fuel consumption is around 32 liters per 100 kilometers, with many variables affecting the actual figures: steady highway driving can reduce it to 28 liters, while heavy traffic and high loads can push it up to 40 liters. As an owner, fuel costs are a significant business expense, so I focus on fuel-saving measures, such as regular oil changes to keep the engine clean and maintaining standard tire pressure to reduce resistance. Automatic transmissions are convenient but slightly more fuel-consuming, so planning routes before long trips helps avoid unnecessary detours. Controlling load weight is also crucial, as traveling light improves efficiency. Sharing some practical tips: smooth acceleration and avoiding speeding habits have noticeable cost-saving effects. With fuel prices rising rapidly, these small techniques can save dozens of yuan in daily expenses. Overall, considering fuel consumption when purchasing a vehicle is beneficial for controlling operational profits.

Was this review help?
14
4
Share
Expand All
More Forum Discussions

What is the real reputation of Geely Borui after three years?

Geely Borui has relatively high fuel consumption, powerful engine performance, strong acceleration, beautiful appearance, good interior craftsmanship, high cost-performance ratio, and rich configurations. Geely Borui exterior design: The Borui GE has undergone optimized designs on multiple parts such as the grille and front/rear bumpers, making the overall shape more dynamic and stylish. The optimized water ripple grille is more square and more imposing. The lower grille design has been updated from the original ribbon style to a blade style, with the addition of a horizontal chrome trim, giving the front face more layers and a three-dimensional feel. Geely Borui interior design: The Borui GE adopts a "Starship Cockpit" design, with the interior largely wrapped in soft plastic materials. The center console is outlined with "V" shaped lines and innovatively integrates the instrument panel, central control screen, and co-pilot console into one, presenting an IMAX-like visual effect. Additionally, the dual 12.3-inch central control LCD screen and full LCD instrument panel, the sci-fi atmosphere lighting of the "Time Tunnel," intelligent voice control, piano key-style air conditioning control buttons, the floating feeling of the horizontally designed gear lever, and the driving mode knob crafted with micron-level precision all showcase Geely Borui's pursuit of premium luxury quality and spiritual experience.
16
2
Share

How to Cancel the Tire Pressure Warning Light on Volkswagen?

Method to reset the tire pressure warning on Volkswagen Sagitar: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button. After hearing a "beep" sound, release the button. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. There are three commonly used methods for tire pressure monitoring: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the tire pressure data for each tire. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, resulting in a faster rotation speed compared to the other wheels. By comparing the differences in rotation speeds between the tires, the system monitors the tire pressure. Introduction to Tire Pressure Monitoring System (TPMS): It combines the advantages of both systems mentioned above. Direct sensors are installed in two diagonally opposite tires, and a four-wheel indirect system is also equipped.
3
1
Share

What are the dimensions of the A7L?

Audi A7L dimensions are 4976mm in length, 1908mm in width, and 1405mm in height, with a wheelbase of 2928mm. A7L interior features: Two high-definition touchscreens measuring 10.1 inches and 8.6 inches enable numerous entertainment and convenience operations, providing feedback through tactile and auditory sensations to create a more convenient and avant-garde digital cockpit. A 12.3-inch high-resolution TFT screen is positioned directly in the driver's line of sight, displaying multiple driving information in a simple, easy-to-understand, and clear layout. A7L powertrain specifications: The A7L is equipped with a 3.0TFSI V6 engine, delivering a maximum output of 250kW and a robust torque of 500Nm, achieving 0-100km/h acceleration in approximately 5.6 seconds while ensuring high fuel efficiency and low emissions. It features the latest generation quattro intelligent all-wheel-drive system, which adaptively distributes torque between the front and rear axles according to different scenarios, enabling predictive and rapid response for all-wheel-drive mode switching. The active air suspension also adapts to various road conditions. Additionally, the 48V mild hybrid system provides comprehensive electrification support, offering energy recovery during braking for use in acceleration, resulting in more powerful performance, enhanced ride comfort, and a more elegant and composed driving experience.
17
2
Share

How to Remove the Wiper Blades on an Audi A4?

Audi A4 wiper blade removal method is as follows: 1. First, lift the metal wiper arm of the FAW-Volkswagen Audi A4 vehicle off the windshield, then stand the wiper upright, ensuring it remains stable. 2. Locate the plastic tab securing the rubber wiper blade to the metal arm. Press the tab to release and remove the old wiper blade from the Audi vehicle. 3. Additional Information: The wiper blade is a device used to sweep away rain and dust attached to the vehicle's windshield, improving driver visibility and enhancing driving safety.
16
1
Share

When will the China 6 emission standard be implemented in Hunan?

Hunan will implement the China 6 emission standard from July 1, 2019, in accordance with the national unified deployment. The country divides the "China 6 emission standard" into two phases: "China 6A" and "China 6B". China 6A is a transitional phase from China 5 to China 6, with lower emission requirements for carbon monoxide, non-methane hydrocarbons, nitrogen oxides, and PM particulate matter compared to China 6B. Below are the official implementation dates for the two China 6 standards: 1. The official implementation date for China 6A standard is July 1, 2020. 2. The official implementation date for China 6B standard is July 1, 2023.
18
0
Share

What causes the roof noise in Roewe RX5?

The main reasons for the roof noise in Roewe RX5 are as follows: 1. Loose fixing clips on the car roof, which require inspection and re-fixation: The interior panels of the car are mostly fixed to the body with clips. When the clips become loose, the interior panels will make noise. To solve the noise issue, it is necessary to accurately locate the source of the noise and then reinforce or replace the clips in the affected area. 2. Poorly secured wiring inside the car roof, causing noise: The roof needs to be dismantled for repair. Additionally, the Roewe RX5 adopts the brand's signature Rhythm design language, featuring a large front grille and decorative chrome trim.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.