What is the fuel consumption of the 3.5T Raptor?

1 Answers
VanGabriel
07/30/25 9:30am
The Raptor currently has one model on sale. The 2022 3.5T Raptor equipped with a 423-horsepower engine has an NEDC fuel consumption of 11.5L per 100 kilometers. Different Raptor models have varying fuel tank capacities. The distance that can be covered on a full tank of fuel is as follows: For the model equipped with a 423-horsepower engine, the fuel tank capacity is 136.3L. On a full tank, it can cover a distance of 136.3/11.5*100=1185KM. The fuel consumption of a car is directly influenced by five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption include: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power output, requiring more gasoline for combustion. Heavier cars also consume more fuel due to the greater driving torque needed. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous terrain increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline for combustion, which increases fuel consumption. Additionally, in cold temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, further increasing fuel consumption.
Was this review help?
17
3
Share
More Forum Discussions

How to Bind a Driver's License to Someone Else's Vehicle?

First, download and install the Traffic Management 12123 app, then register and bind your driver's license after installation. The vehicle interface is where you bind vehicles, divided into two categories: your own vehicle and someone else's vehicle. Select 'Someone Else's Vehicle'. After selecting someone else's vehicle, you need to fill in some basic information about the vehicle. Fill in the details according to the actual situation and then click 'Apply to Bind'.
13
1
Share

How to engage 4WD in a manual pickup truck?

There is a rotary switch on each of the front wheel axles. When selecting 4WD, turn the switch to the ON position; for 2WD, turn it to OFF. Next to the gear shift lever, there is a lever for switching between 2H and 4H. When 4WD is not in use, it should be set to LOCK. Engaging 4WD with the pickup truck's front wheels in free state can accelerate damage to the front drive gear and axle.
10
4
Share

How to Connect Motorcycle Fuel Lines?

A white plastic fuel line, similar to a negative fuel tank, connects to the lower left corner interface of the carburetor. Another line has a Y-connector, with one end connecting to the right interface of the carburetor and the other end connecting to the well in front of the carburetor. The air filter is attached to the rear part of the carburetor, and a thin tube, similar to a fuel line, is connected to the cylinder head at the front.
14
0
Share

What to Do If the Exhaust Pipe Gets Waterlogged and the Engine Won't Start?

Remove the high-voltage cap to check if it's wet. If it is, dry it (use tissue paper to wipe it dry), then remove the spark plug and insert it into the high-voltage cap. If the spark is weak or absent, focus on checking the circuit and leave the motorcycle under the sun for 2 days. Remove the exhaust pipe to drain the water, then take off the air filter. If there's water on the filter element, replace it directly. Drain the existing crankcase oil, then remove and clean it thoroughly. Use strong cleaning agents or similar products to clean the engine interior.
10
0
Share

What body colors are available for the Touareg?

The Touareg offers a total of 8 color options for consumers to choose from, including Velvet Brown, Iceland Silver, Aurora White, Mountain Brown, Agate Red, Desert Gold, Basalt Black, and Obsidian Gray. Below is an introduction to the Touareg: 1. The Touareg is a new mid-to-large-size SUV under SAIC Volkswagen. 2. Exterior: The SAIC Volkswagen Touareg draws heavily from the design of the CrossBlue concept car, presenting an overall rugged and imposing appearance. In detail, the new vehicle features a dual-slat chrome grille that extends directly into the headlights. 3. Interior: The SAIC Volkswagen Touareg incorporates very straight-line design elements, also inspired by the CrossBlue concept car. Additionally, the new vehicle comes with a three-spoke flat-bottom steering wheel and a 12.3-inch full LCD instrument cluster (exclusive to high-end models). 4. For the infotainment system, the multimedia display supports the App-Connect mobile interconnect platform, compatible with Apple CarPlay and Android Auto. 5. Features: The new vehicle is equipped with adaptive cruise control, lane keeping, blind spot monitoring, collision warning, heated steering wheel, front seat heating/ventilation, panoramic sunroof, and more. 6. Powertrain: The Touareg is powered by a 2.0TSI high/low-power engine and a 2.5T V6 engine. The new 2.5T engine delivers a peak torque of 500N·m. The transmission system paired with the 2.5T engine is the DQ500 7-speed wet dual-clutch gearbox.
19
1
Share

What Brand of Car is Leapmotor?

Leapmotor is a technology-driven intelligent electric vehicle brand under Zhejiang Leapmotor Technology Co., Ltd., established on December 24, 2015. The main models of Leapmotor include the Leapmotor S01, Leapmotor T03, Leapmotor C01, and Leapmotor C11. The Leapmotor logo is composed of the two English letters L and P after artistic deformation. The English word LEAPMOTOR in the logo can be interpreted as LEA (zero), P (run), which can be understood as leading the race, symbolizing the ambition to become a leading enterprise in the new energy vehicle industry. The important milestones in Leapmotor's development are as follows: On December 24, 2015, Leapmotor was officially established. In November 2017, the first mass-produced model of Leapmotor, the S01, was unveiled. In April 2019, Leapmotor's first crossover pure electric SUV model, the Leapmotor C-more, debuted at the Shanghai Auto Show. In April 2020, the Leapmotor S01 460 version was launched. In May 2020, the Leapmotor T03 model was launched. In October 2020, the Leapmotor T03 400 Light Enjoy version was launched. In November 2020, the Leapmotor C11 made its global debut at the Guangzhou Auto Show. In June 2021, the Leapmotor T03 Comfort version was launched.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.