What is the fuel consumption of the 2020 Cruze four-cylinder model?

Can alcohol be used to disinfect the car interior?

Alcohol can be sprayed inside the car for disinfection. However, the following points should be noted: 1. Wipe dry immediately: Alcohol is a flammable and explosive product. If alcohol is sprayed for disinfection, it should be wiped dry immediately. Keep the car windows open in a well-ventilated environment, and try to spray on the surface of objects, avoiding hidden or hard-to-reach areas inside the car. 2. Ventilation: After disinfecting the car interior, do not smoke inside the car or close the windows, as the rising temperature can reach the ignition point of alcohol, which may easily lead to explosions or fires.

9

5

Share

How to Determine When Engine Oil Needs Changing

There are four methods to determine engine oil condition: 1. Smell Test: Pull out the dipstick and smell it closely. If there's a strong sour odor, it indicates the oil has deteriorated and should be changed. 2. Finger Rub Test: Rub the extracted old oil between your thumb and index finger repeatedly. Good quality oil will feel lubricated with minimal grit and no friction. If you feel impurities, poor viscosity, or even grittiness, it should be changed. 3. Color Identification Method: Place a few drops of old oil on a clean white filter paper (or high-quality tissue). After absorption, good oil leaves no powder, feels dry and smooth to touch, and shows clear yellow staining. If it appears dark brown with impurities, change is needed. 4. Light Inspection Method: Hold the dipstick at a 45-degree angle under light. Good oil will show no visible particles in the droplets. If numerous particles are visible, replacement is required.

11

1

Share

Does the ETC card have a front and back side?

ETC cards have a front and back side. When you receive the card, the side with the chip is the front, which should face the car window and be inserted into the OBU device's card slot. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU; a red light will briefly turn on, and the OLED screen will display "Invalid, please insert card," indicating the device is functioning properly. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then peel off the adhesive backing of the OBU and stick it to the installation position, pressing firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is inserted into the OBU device. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Promotes low-carbon travel by allowing vehicles to pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduced wear and tear: Saves costs by decreasing the frequency of vehicle starts and stops, lowering wear and fuel consumption. Users also enjoy a 5% discount on toll fees; Improved efficiency: ETC lanes theoretically increase vehicle throughput by 2-3 times, making traditional ETC faster, more advanced, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.

1

3

Share

What transmission does the Verna RV use?

The transmission manufacturer for the Verna RV is Aisin. Established in 1969, Aisin is a world-renowned specialist in the research, development, and manufacturing of automotive automatic transmissions. In the field of automotive automatic transmissions, Aisin's products hold the highest market share globally. The Verna RV is equipped with a 6-speed manual transmission and a 6-speed automatic transmission (6AT). The automatic transmission features eight forward gears. Essentially, the automatic transmission with manual mode is a traditional AT or CVT transmission augmented with manual shifting functionality. For the Verna RV's transmission, the following points should be noted during daily use: Do not delay transmission fluid changes for extended periods. Prolonged intervals without changing the transmission fluid can damage internal components such as bearings and the housing. Avoid coasting in neutral for long durations. While driving manual transmission models, many experienced drivers may coast in neutral, but for automatic transmission models, this can cause overheating. Additionally, shifting back into Drive (D) can create a noticeable jolt. Avoid shifting into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Some drivers, aiming for smooth operation, may shift into reverse while the vehicle is still moving, which can severely damage the transmission gears and, over time, lead to gear grinding or other failures. Do not frequently climb steep slopes in Drive (D). On steep inclines, automatic transmission vehicles may overheat due to high load or upshift prematurely, resulting in insufficient power. In such cases, use manual mode to lock in a lower gear or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck with the transmission in Neutral (N). Avoid using tow ropes or towing the vehicle directly with another vehicle.

4

3

Share

How to Start a Geely Car When the Key Fob Battery is Dead

Use the mechanical key on the side of the key fob to open the car door and start the vehicle. Below is relevant information about Geely automobiles: 1. Logo Meaning: The new logo of Geely Auto brand continues the six-gemstone design concept from its 3.0 era. Taking the expanding universe as its design inspiration, it incorporates starlight silver, deep space gray, and earth blue, symbolizing Geely's evolution from the "blue sky and vast earth" theme of its 3.0 era to the pursuit of the boundless cosmos. 2. Subsidiary Brands: Geely Auto Group currently owns the Geely Auto brand, Lynk & Co brand, Geometry brand, Proton brand, and Lotus brand.

13

1

Share

How to Adjust the Sound Quality of the 10th Generation Accord?

10th Generation Accord allows you to adjust the sound quality through the SOUND button and FADER knob on the center console. Here are some relevant details about the 10th Generation Accord: 1. Powertrain Configuration: The 10th Generation Accord is equipped with three types of engines: a low-power 1.5L turbocharged engine, a high-power 1.5L turbocharged engine, and a 2.0L naturally aspirated engine. 2. Fuel Consumption: The 10th Generation Accord has relatively low fuel consumption. The 1.5T model consumes approximately 7.4L per 100km, while the 2.0L model consumes about 5.5L per 100km.

14

3

Share

What is the fuel consumption of the 2020 Cruze four-cylinder model?

Can alcohol be used to disinfect the car interior?

How to Determine When Engine Oil Needs Changing

Does the ETC card have a front and back side?

What transmission does the Verna RV use?

How to Start a Geely Car When the Key Fob Battery is Dead

How to Adjust the Sound Quality of the 10th Generation Accord?

Why Does a Sedan Make a Clunking Sound When Driving on Uneven Roads?

Will changing the color of the car logo be penalized?

The Correct Way to Drive an Automatic Transmission Car

Is it mandatory to equip a fire extinguisher in the car?