What is the fuel consumption of the 2014 Mercedes-Benz S63?

1 Answers
MacAlejandro
07/29/25 5:49pm
Mercedes-Benz S63 has a combined fuel consumption of 17 liters. Below is relevant information about Mercedes-Benz fuel consumption: Vehicle fuel consumption statistics: The fuel consumption range for the Mercedes-Benz GLC 260 model is 9.12-11.71L/100km, with an average of 10.42L/100km; the 300 model has a fuel consumption range of 9.15L-11.70/100km, with an average of 10.41L/100km. MIIT fuel consumption: This is the fuel consumption tested by China's Ministry of Industry and Information Technology and related departments on test benches by simulating different driving conditions, usually lower than actual fuel consumption. For car owners, MIIT fuel consumption can serve as a reference for comparing fuel consumption when purchasing new cars since it is tested under the same standard.
Was this review help?
12
2
Share
More Forum Discussions

How to Prevent Tire Aging?

Tire aging prevention requires attention to the following points: 1. Do not store tires or park vehicles in areas exposed to direct sunlight or near chemical substances; 2. Monitor load conditions and avoid overloading, as it accelerates tire wear and aging; 3. Regularly check tire pressure and remove foreign objects to prevent prolonged fatigue rotation of tires. Here is relevant information about tires: 1. Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. They are typically installed on metal rims to support the vehicle body, absorb external shocks, maintain contact with the road surface, and ensure driving performance. 2. Tires often operate under complex and demanding conditions, enduring various deformations, load forces, and extreme temperatures during use. Therefore, they must possess high load-bearing capacity, traction performance, and shock absorption capabilities.
7
5
Share

What are the differences between Audi A3 and S3?

One is the S series, which represents Audi's high-performance lineup, while the other is just the standard A series. The key difference lies in performance. Below are the distinctions between the two: 1. As a performance model, the S3, despite sharing the same 2.0T engine with the A3, boasts significantly higher power parameters. With the same cylinder size, the S3 delivers an additional 50kW and 30Nm of power compared to the A3. 2. In terms of dimensions, there is no significant difference. The minor discrepancies of a few millimeters are merely due to suspension tuning and aerodynamic kits, which can be largely ignored. 3. For the interior, the S3 features a flat-bottom steering wheel with a moderate thickness and exquisite design, promising an excellent grip. Moreover, the sporty red and black interior combination is highly effective in stimulating the driver's fighting spirit. In contrast, the A3's interior is much more conventional, aligning with the standard family car aesthetic.
20
0
Share

Do I need to register a car spoiler with the DMV?

Installing a spoiler on a car requires registration with the DMV. Registration method: If you want to install a spoiler, you need to report and register it with the DMV. Ensure that the installed spoiler does not exceed the original width of the vehicle. Apply for a vehicle modification registration at the DMV, take photos for the vehicle license, and undergo an inspection at the testing line. After on-site inspection by DMV personnel confirms that the spoiler does not affect the safe operation of the vehicle, the spoiler can be registered. Modifications requiring registration: Before modifying a vehicle, the owner should apply for a modification registration with the local DMV. Modifications such as the engine, vehicle frame, or more than two-thirds of the vehicle's appearance require registration.
14
4
Share

What are the reasons for the tire pressure monitoring not displaying?

The tire pressure monitoring not displaying may be due to the following reasons: 1. The battery of the module is depleted, and generally, the entire tire pressure monitoring module needs to be replaced. 2. The module's inspection port is blocked by something, preventing the module from performing detection. 3. Pairing failure, requiring re-pairing. Some vehicle models can complete this on their own, but most models require professional pairing at a 4S shop. 4. The module is already damaged and can only be replaced with a new one. 5. If the tire pressure of one tire is not displaying, first determine if the tire pressure sensor of that wheel is installed correctly. Remove the tire and reinstall it to try again. If it still doesn't display, you can swap the normal sensor to this wheel. If it still doesn't display, it indicates a fault with the tire pressure display module. If it displays normally, it means the sensor is damaged.
6
1
Share

What are the general maintenance items for a car?

General car maintenance includes items such as engine oil and oil filter, air filter and cabin air filter, windshield washer fluid, coolant, transmission fluid, clutch fluid, and differential fluid. Engine oil and oil filter are the most basic and essential items in maintenance, which must be inspected and replaced during every service. For most vehicle models, the engine oil, fuel filter, oil filter, and air filter should be replaced approximately every 5,000 kilometers to extend the engine's lifespan. Proper installation of the oil filter can prevent impurities from mixing into the engine oil during the operation of the internal combustion engine, avoiding wear on moving parts and blockages in the oil passages. Correct installation of the fuel filter can prevent cylinder wear caused by impurities and moisture mixed into the gasoline during storage, transportation, and refueling. To ensure optimal engine performance, the fuel filter should generally be replaced every 20,000 kilometers or once a year.
10
5
Share

What are the symptoms of a faulty car water pump?

When a car's water pump fails, it mainly exhibits the following symptoms: 1. The engine coolant temperature rises and does not decrease; 2. Water leakage occurs near the water pump area of the engine; 3. Unusual noises come from the water pump area after starting the engine. Here is some relevant information about water pumps: 1. Automotive engines widely use centrifugal water pumps. Their basic structure consists of components such as the water pump housing, connecting flange or pulley, water pump shaft and bearings or integrated shaft bearings, water pump impeller, and seal assembly, making them a major component of the vehicle. 2. They are generally driven by the engine's crankshaft via a V-belt. The drive belt wraps around the crankshaft pulley and the water pump pulley, causing the water pump shaft to rotate as the crankshaft turns. The water pump shaft then drives the impeller to rotate, thereby converting mechanical energy into hydraulic energy.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.