What is the fuel consumption of a 200cc three-wheeled motorcycle per 100 kilometers?

1 Answers
AllisonAnn
07/29/25 8:29pm
200cc three-wheeled motorcycles consume more than 3.5L of fuel per 100 kilometers, but there is no stable answer to this question. Even for models with the same displacement and class, there can be significant differences in fuel consumption per 100 kilometers. These differences mainly stem from the choice of model, the driver's skills, road conditions, and other multifaceted influences. Therefore, these factors are the reasons why models of the same type and displacement can have varying fuel consumption. Motorcycle fuel consumption: Even with the same 200CC engine, different engines have different fuel consumption. For example, straddle-type motorcycles may consume around 2.5L per 100 kilometers, while scooter models are slightly higher, reaching about 3.2L per 100 kilometers. Three-wheeled motorcycles have even higher consumption, exceeding 3.5L per 100 kilometers. Thus, engines of the same displacement can have different fuel consumption levels. Methods to reduce motorcycle fuel consumption: Regularly check the fuel tank, carburetor pipes, etc., to avoid oil leaks. Choose the appropriate gasoline according to the model. After starting the motorcycle, avoid unnecessary throttle usage.
Was this review help?
5
0
Share
More Forum Discussions

What is the tire size of the Great Wall Haval H6?

Haval H6 models come with two tire specifications: 235/60R18 tires and 235/55R19 tires. According to the Haval H6 tire parameters provided by PCauto, the tire size for the entire Haval H6 series is 225/65R17. The numbers in the tire model indicate the load index of a single tire. The higher the index, the greater the load capacity the tire can bear. Additional information: 1. 235/60R18 tires: The tire width is 235MM, the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, and the rim diameter is 18 inches. 2. 235/55R19 tires: The tire width is 235MM, the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and the rim diameter is 19 inches. 3. When a vehicle is severely overloaded or fitted with tires that have a load index that is too low, the risk of a tire blowout increases significantly. The last letter in the tire model represents the speed rating of the tire. If the vehicle speed exceeds the speed rating of the selected tire, the tire will be on the verge of a blowout.
2
2
Share

What type of gasoline should be used for the Toyota Avalon?

The fuel tank capacity of the Toyota Avalon is 60 liters, and the manufacturer recommends using 92-octane gasoline. For safety reasons, the engine must be turned off before refueling, and the fuel tank cap can be opened by pressing it without locking the car. Below are the precautions for refueling the Toyota Avalon/Avalon Hybrid: 1. Correctly place the fuel nozzle into the fuel filler port to prevent overflow and potential fire hazards, which could cause personal injury. 2. Ensure the fuel tank cap is securely closed after refueling to avoid accidents caused by evaporation or spillage. 3. It is not recommended to stay inside the vehicle during refueling. If someone remains in the car, close the doors tightly and avoid using electronic devices. Before touching the fuel nozzle again, discharge static electricity by touching a metal surface. 4. Turn off the engine and all electrical devices during refueling to prevent fire risks from electrical currents or high temperatures. 5. Smoking or using a phone while refueling is strictly prohibited. 6. If the remaining fuel level is below 1/4, refuel at the nearest gas station as soon as possible to avoid a breakdown.
2
1
Share

What Causes Ford Focus Idle Vibration?

Ford Focus idle vibration can be attributed to the following reasons: 1. Excessive or insufficient spark plug gap, excessive carbon buildup on spark plugs, damaged ignition coils, disconnected or leaking high-voltage wires are significant causes of vehicle vibration. For unstable idle, the entire ignition system should be inspected—sometimes simply replacing the spark plugs resolves the issue. 2. Excessive carbon deposits on the engine, throttle body, and fuel injectors are the primary cause of engine vibration. Since carbon deposits absorb gasoline, excessive buildup can lead to uneven fuel mixture concentration in the cylinders, resulting in particularly noticeable vibration during cold starts. Timely carbon cleaning can address this issue. 3. Idle vibration may also be related to aging engine mounts (also known as engine mounts or rubber mounts). Engine mounts, located between the body and the engine, are part of the vehicle's vibration damping system, absorbing minor vibrations during engine operation. If the engine mounts fail, their vibration damping effectiveness decreases, causing body vibration at idle. 4. Unstable fuel pressure can lead to inconsistent fuel mixture concentration, causing not only vibration but also unstable idle. Consider replacing the fuel filter first, as prolonged use may clog the filter element. Then check the fuel pressure after the filter; if abnormal, the issue may lie with the fuel pump.
4
0
Share

How long is the battery warranty for the Trumpchi GS4?

The battery warranty period for the Trumpchi GS4 is one year. Within this one-year period, any quality issues will result in a free replacement. Car batteries are sensitive to low temperatures—under cold conditions, a battery's capacity is significantly lower than at normal temperatures. Therefore, regular inspection and maintenance are essential. Daily care tips include: 1. Avoid parking the car in open-air parking lots for extended periods. If long-term parking is unavoidable, remove the battery to prevent freezing damage. 2. In winter, car engines are harder to start. Each attempt to start the engine should not exceed 5 seconds, with at least a 15-second interval between attempts. If the engine fails to start after several tries, check other potential issues like the electrical circuit, ignition coil, or fuel system. Avoid continuous unsuccessful starts, as this can over-discharge and damage the battery. 3. Regularly charge the car battery. A battery left unused will gradually self-discharge and eventually become unusable. Thus, start the car periodically to recharge the battery. 4. Clean the battery terminals periodically and apply specialized grease to protect the wiring harness. Routinely inspect the battery's components and connections. 5. Avoid using car electronics when the engine is off. Using the battery alone without the engine generating power can cause harm.
2
3
Share

What is the Scrap Life of a Family Car?

There is no usage period limit for passenger cars. When the normal mileage reaches 600,000 kilometers, the state will guide the vehicle to be scrapped. Vehicle scrapping process: 1. The car owner applying for scrapping and renewal must fill out an "Application Form for Vehicle Modification, Transfer, Alteration, Suspension, or Scrapping" and affix the owner's seal. 2. Apply at the registration acceptance counter. For vehicles that have reached the scrapping age, a "Vehicle Scrapping Notice" will be issued. For vehicles that have not reached the scrapping age but are deemed to meet the scrapping standards after inspection by the vehicle inspection counter, a "Vehicle Scrapping Notice" will be issued. 3. The owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". 4. After verifying the "Notice", the recycling company will dismantle the vehicle and take photos. The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. 5. The owner must submit the "Modification Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the vehicle inspection counter for verification and signature. The license plates will be reclaimed, and the application will be submitted for approval according to regulations to complete the scrapping registration.
9
5
Share

What is the break-in period mileage for the Infiniti QX50?

The break-in period for the Infiniti QX50 is 3,000 kilometers. Before vehicle assembly, each moving component is processed separately, and geometric deviations exist during the machining of parts. Therefore, after assembly, some moving parts may have direct local contact, making it difficult for lubricating oil to reach the friction surfaces, resulting in early wear. The process of wearing away metal debris and burrs from parts when the car is first used is called the break-in period. Below are precautions to take during the new car break-in period: 1. Avoid high-speed driving: New cars have speed limits during the initial driving phase. Domestic vehicles are generally limited to 40-70 km/h, while imported vehicles typically require that within the first 1,000 kilometers, the speed should not exceed 80% of the maximum speed when the throttle is fully open. Additionally, it is important to monitor the engine tachometer and speedometer to ensure the engine and vehicle operate at medium speeds. Generally, the engine speed during the break-in period should be strictly maintained between 2,000 and 4,000 rpm. 2. Throttle and brake usage during the break-in period: Learn to control the depth of the throttle during the break-in period. Pressing the throttle deeply increases air intake, which in turn increases fuel injection, potentially damaging internal components. Frequent hard braking can also cause excessive wear on the braking system. 3. Avoid emergency braking: Emergency braking not only shocks the braking system during the break-in period but also increases the impact load on the chassis and engine. Therefore, it is recommended not to use emergency braking within the first 300 kilometers of driving.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.