What is the engine RPM when a sedan reaches 120 km/h?

1 Answers
DeRobert
07/29/25 9:07pm
There is no fixed value for engine RPM when a car reaches 120km/h. The engine speed and influencing factors are as follows: Introduction to engine RPM: The level of engine RPM relates to the number of work cycles per unit time or the effective power output of the engine, meaning the engine's effective power varies with different RPMs. Therefore, when specifying the engine's effective power, the corresponding RPM must be indicated simultaneously. Factors influencing engine RPM: Besides being affected by fuel octane rating and anti-knock properties, automobile engine RPM is generally also related to factors such as engine material and manufacturing, high-voltage current magnitude, valve train condition, and lubricating oil quality.
Was this review help?
5
2
Share
More Forum Discussions

Where is the fuse box located in the 12th-generation Crown?

Toyota Crown has two fuse boxes, one in the engine compartment and one in the cabin. Below is additional information: 1. Automotive Fuse Box: An automotive fuse box is used to install car fuses. Based on the size of the installed fuses, they can be categorized into: small automotive fuse boxes, medium automotive fuse boxes, and large automotive fuse boxes. When selecting an automotive fuse box, factors such as the current rating of the fuse and the size requirements should be considered, allowing for the choice of different fuse boxes. 2. Fuses: Fuses, officially known as 'circuit breakers,' serve a similar purpose in cars as they do in households—they melt when the circuit current is abnormal and exceeds their rated current, acting as a protective barrier for the circuit. Automotive fuses are broadly divided into two types: fast-acting fuses and slow-blow fuses. When replacing fuses in the Crown, ensure the appropriate fuse is selected.
19
3
Share

What are the differences between the T-Roc and the Enclave GX?

The differences between the T-Roc and the Enclave GX are as follows: 1. Different transmissions: The T-Roc has a 7-speed dual-clutch transmission, while the Enclave GX has a CVT continuously variable transmission. 2. Different body dimensions: The T-Roc measures 4318mm in length, 1819mm in width, and 1582mm in height, whereas the Enclave GX measures 4463mm in length, 1813mm in width, and 1642mm in height. Relevant information is as follows: 1. Model: The T-Roc is FAW-Volkswagen's first SUV product, the TRoc, featuring a stylish aesthetic design. Its front face presents a T-shaped design, with the headlight assembly integrated into the front grille, complemented by circular LED daytime running lights on both sides, giving it an overall fashionable appearance. 2. Enclave GX: The Enclave GX is SAIC-GM Buick's first all-new compact SUV, equipped with a new family-style winged chrome grille. The electroplated trim extends from the logo to the bottom of the headlights on both sides, broadening the horizontal visual effect. The full LED automatic sensing headlights feature the new Evonik light curtain technology, creating a uniform light curtain effect.
8
5
Share

Why is one side wider and the other narrower when reversing into a parking space?

The main reason for one side being wider and the other narrower when reversing into a parking space is the incorrect timing of steering wheel operation. Here are the relevant explanations: 1. Steering too early: When the steering wheel is turned too early during right-side reversing, the wheels will be closer to the corner of the parking space, resulting in a left-wide and right-narrow situation after parking. 2. Steering too late: When the steering wheel is turned too late, the parked vehicle will exhibit a left-narrow and right-wide condition after reversing into the space. 3. Reverse parking: Also known as reverse pole or pole test, this is an assessment point in driver's tests where the examinee must correctly reverse the vehicle into a garage space from both sides while in motion. It primarily evaluates the driver's ability to maneuver the vehicle in confined spaces and their spatial awareness during vehicle movement.
20
5
Share

What is the total loss standard for water-damaged vehicles?

The following is an introduction to the total loss standards for water-damaged vehicles: 1. Level 1: The water has just reached the vehicle's chassis, and the exhaust pipe, fuel tank, and carbon canister may be submerged. The vehicle floor may become damp, but the likelihood of significant water ingress is low, and the impact on the vehicle's electrical equipment is minimal. 2. Level 2: The water level reaches halfway up the wheels. Due to the vehicle's incomplete sealing, water will begin to enter the interior. For lower-sitting sedans, the water level inside may affect the adjustment motors of the seats as well as electrical components such as heating and ventilation. 3. Level 3: The water almost completely submerges the tires. At this point, the water level inside the vehicle will fully immerse the seat cushions and the central armrest area, while also affecting a large number of electrical components.
2
4
Share

How much is the general compensation for a minor car rear-end collision?

How much compensation is required for a minor car rear-end collision depends on the extent of the damage and the insurance company's assessment. A rear-end collision refers to the behavior where the front of the following vehicle collides with the rear of the preceding vehicle while driving in the same lane. It is mainly caused by the following distance being less than the minimum safe distance and the driver's slow reaction or poor braking system performance. Additional information: Below is relevant information about traffic accidents: 1. Introduction: "Traffic Accident" refers to an incident where a vehicle causes personal injury, death, or property damage on the road due to fault or accident. 2. Causes: Traffic accidents can not only be caused by unspecified individuals violating road traffic safety regulations but also by irresistible natural disasters such as earthquakes, typhoons, flash floods, and lightning strikes.
14
2
Share

Why does the old Changan Mazda 3 consume so much fuel?

The old Changan Mazda 3 consumes excessive fuel mainly due to excessive carbon deposits in the engine. Here are some relevant details about the Mazda 3: 1. Interior: The new generation Mazda 3 features a minimalist design style for the air vents and center console interface. Metal or high-gloss piano black trim panels are used on the door panels, air vents, or around the gear lever to enhance the overall texture. Additionally, lightweight seats improve riding comfort, though only black and white color options are available for the seats and interior. 2. Configuration: The new generation Mazda 3 is equipped with advanced safety features such as the HBC intelligent lighting control system, AFS active steering headlights, HLA hill start assist system, ESS emergency brake warning system, RVM rear blind spot detection, and LDWS lane departure warning system, which are consistent with other models in the Mazda family.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.