···
Log in / Register

What is the engine model of the Volkswagen Tiguan?

1Answers
LaEmiliano
07/29/2025, 12:04:54 AM

The 1.4L turbocharged engine model of the Volkswagen Tiguan is EA211; the 2.0L turbocharged engine model is EA888. The maximum horsepower is 186PS, maximum power is 137kW, and maximum torque is 320Nm. The engines of domestically produced Tiguan are made in China, while those of imported Tiguan are from Germany. For daily maintenance of the Volkswagen Tiguan's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid failures, change the oil regularly based on usage conditions and maintain an appropriate oil level; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve, bringing contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures normal engine operation but also extends the overall lifespan of the radiator and engine.

Was this review help?
114
Share
More Q&A

Can a car pass the annual inspection with traffic violations?

A car cannot pass the annual inspection if there are unresolved traffic violation records. It is necessary to check the traffic violation records before the annual inspection and handle any existing violations to obtain the inspection exemption mark. According to current regulations in China, new cars have a six-year inspection exemption period. During this period, motor vehicles do not need to undergo on-site testing but only need to apply for the inspection exemption mark. However, traffic violations must still be resolved before the annual inspection. As per relevant regulations, the owner of a motor vehicle can apply for the inspection compliance mark at the local vehicle management office up to three months before the expiration of the current inspection period. During the application process, the owner must fill out an application form and submit the vehicle license, compulsory traffic accident liability insurance certificate, vehicle and vessel tax payment or exemption proof, and motor vehicle safety technical inspection compliance certificate. Traffic violations are divided into on-site penalties and non-on-site penalties. On-site penalties generally refer to the process where traffic police officers impose penalties immediately for detected violations. During the penalty process, the officer will inform the party involved about the violation handling time and location. Non-on-site penalties usually refer to penalties for traffic violations captured by surveillance equipment. For such violations, the traffic police will send the penalty notice to the vehicle owner via mail, which will specify the violation location, reason, behavior, and handling time.
103
Share

What are the reasons for the engine warning light in Tucson?

Tucson engine warning light may come on due to the following 7 main reasons: Sensor failure: The sensors mentioned here include coolant temperature, crankshaft position, air flow, intake air temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or signal interruption, the car's ECU cannot accurately obtain engine data, which will trigger the engine warning light. Fuel quality issues: If fuel and engine oil are not added as required by the manufacturer, it may cause engine wear and trigger the warning light. Poor combustion of air-fuel mixture: Poor combustion can lead to engine carbon deposits or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a warning. Spark plug failure, ignition coil failure, fuel pump failure, and fuel line blockage can all cause poor combustion of the air-fuel mixture. Turbocharging issues: The intake turbocharging pipeline and turbocharger can also trigger the engine warning light. The most common issue is turbocharger damage, accompanied by symptoms such as oil leakage, high oil consumption, reduced power, metal noises, and blue or black smoke from the exhaust pipe. Intake issues: If there is a problem with the car's intake, it may cause engine pipeline blockage, and in severe cases, trigger the engine warning light. A dirty air filter that is not cleaned regularly can lead to intake problems. Exhaust issues: Exhaust faults can also trigger the engine warning light. The rear oxygen sensor, catalytic converter, exhaust camshaft, and bearing failures are all causes of exhaust problems, with the catalytic converter being the most common. Using leaded gasoline, lead or silicon-containing lubricant additives, physical damage to the catalytic converter, or engine fuel supply system failures can easily cause catalytic converter issues. Anti-theft system failure: If the car's electronic anti-theft system malfunctions or the anti-theft controller does not match the engine electronic controller, the anti-theft system can also prevent the engine from operating normally, while triggering the engine warning light. If the engine warning light comes on, follow these steps: First, check if the engine is running normally, whether there is shaking, black smoke, etc. If so, try not to restart the engine. Especially note that if the red light is on, do not restart the engine. If the engine can be started, turn it off for 5-10 minutes, then without pressing the brake, press the start button once or turn the key halfway to the 'on' position without pressing the clutch. The car will perform a self-check after powering on. Wait for 5-10 seconds to see if the warning light on the dashboard turns off. If the warning light does not turn off, visit a service station as soon as possible to identify the cause. The service station can use a portable diagnostic tool to read the fault code, obtain fault information, and perform targeted repairs.
102
Share

Where is the license plate Qing D from?

Qing D is the license plate of Huangnan Tibetan Autonomous Prefecture in Qinghai Province. The license plate codes for other regions in Qinghai Province are as follows: Qing A is Xining City, Qing B is Haidong City, Qing C is Haibei Tibetan Autonomous Prefecture, Qing D is Huangnan Tibetan Autonomous Prefecture, Qing E is Hainan Tibetan Autonomous Prefecture, Qing F is Golog Tibetan Autonomous Prefecture, Qing G is Yushu Tibetan Autonomous Prefecture, and Qing H is Haixi Mongol and Tibetan Autonomous Prefecture. License plates, commonly known as vehicle plates, are panels hung on the front and rear of vehicles, usually made of aluminum, sheet iron, plastic, or paper, engraved with the vehicle's registration number, registration region, or other relevant information.
104
Share

What are the reasons for an automatic transmission car to suddenly stall?

Reasons for an automatic transmission car to suddenly stall: 1. Use of inferior fuel; 2. Unclear fuel path; 3. Insufficient driving skills. Use of inferior fuel: Long-term use of inferior fuel will cause excessive carbon deposits in the engine, making the car very prone to stalling. Unclear fuel path: One reason for an unclear fuel path is the use of substandard fuel with too much gum and resin, which blocks the fuel path and leads to poor fuel supply. Insufficient driving skills: Insufficient driving skills are also a non-negligible reason for car stalling, but this usually applies to novice drivers, as experienced drivers generally do not have this problem.
113
Share

Press or Lift the Electronic Parking Brake?

Lifting the electronic parking brake activates parking, while pressing it releases the parking. The electronic parking brake is a technology that achieves parking braking through electronic control. Its working principle is the same as that of a mechanical handbrake, both utilizing the friction generated between the brake disc and brake pads to control parking braking. The only difference is that the control method has changed from a mechanical handbrake lever to an electronic button. The electronic parking brake is also known as the Electronic Parking Brake (EPB) system. The electronic parking brake, or Electronic Parking Brake system, integrates the temporary braking function during driving with the long-term braking function after parking, and achieves parking braking through electronic control technology.
102
Share

What are the components of a starter?

The starter is composed of three parts: the electric motor, the transmission mechanism, and the control device. It is specifically designed to start the engine and requires strong torque, thus drawing a large current, up to several hundred amperes. This characteristic distinguishes it from the generator. For example, it uses a DC series-wound motor, with both the rotor and stator wound with relatively thick rectangular cross-section copper wires; the drive mechanism employs a reduction gear structure; and the control mechanism uses an electromagnetic suction method. The motor used in the starter is a DC series-wound motor, whose function is to convert the electrical energy input from the lead-acid battery into mechanical energy, generating torque.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.