What is the engine model of the Jetta VS5?

3 Answers
SanCayden
07/24/25 7:32pm
The Jetta VS5 is equipped with a 1.4T turbocharged direct-injection engine, model EA211. Here is an introduction to the Jetta VS5's engine: 1. Maximum power: 150 horsepower, with a maximum torque of 250 Nm. 2. Advantages: Reliable, durable, highly stable, fuel-efficient, and powerful. The maximum power speed ranges from 5000 to 6000 rpm, and the torque speed range is between 1750 and 3000 rpm. The combined fuel consumption per 100 kilometers is approximately 8.6L. From an exterior perspective, the Jetta VS5 is relatively compact. The Jetta VS5 is paired with an Aisin 6AT transmission, and most of its components are sourced from Volkswagen, ensuring excellent craftsmanship and quality.
Was this review help?
4
0
Share
DelHaven
08/11/25 10:47am
I've been researching cars for many years. The Jetta VS5 is equipped with a 1.4-liter turbocharged gasoline engine from Volkswagen's EA211 series, specifically the 1.4TSI model. This engine typically delivers around 150 horsepower and 250 Nm of torque, providing strong acceleration and effortless overtaking on highways. It's quite fuel-efficient, averaging 7-8 liters per 100 km in city driving, and runs well on regular 92-octane gasoline. The EA211 is a mature technology widely used across the Volkswagen Group, with shared components making maintenance simple – you'll find the same engine in models like the Golf. Its compact design fits well in SUVs like the Jetta VS5, optimizing space while delivering stable handling and good noise control. With regular oil and filter changes, this engine proves quite durable.
Was this review help?
15
4
Share
Expand All
LaAlyssa
08/11/25 10:48am
As a car owner, I've been driving the Jetta VS5 for almost a year now, equipped with the 1.4T turbocharged engine, the Volkswagen EA211 model. The actual driving experience has been great – it's agile and not sluggish at startup, with ample power on the highway. In terms of fuel consumption, my car averages just over 7 liters, and using 92-octane gasoline is economical. Maintenance costs only a few hundred yuan each time. The engine noise is minimal, and there's little body vibration, making long drives less tiring. Compared to other cars in its class, this engine responds quickly and is low-maintenance. Driving it gently can extend its lifespan. Regularly checking the coolant to avoid overheating is important. Overall, it's practical, reliable, and offers great value for money.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

How often should the brake fluid be changed in a Nissan X-Trail?

The brake fluid in a Nissan X-Trail should be changed every two years or 40,000 kilometers. Brake fluid replacement for the Nissan X-Trail: Changing the brake fluid in a Nissan X-Trail requires 2-4 liters. Brake fluid has hygroscopic properties, and if not replaced for a long time, it can corrode the braking system, posing a safety hazard. Steps for changing brake fluid: Park the vehicle on level ground, turn off the engine, and open the hood. Use a syringe to extract the old fluid from the reservoir. Fill the reservoir with new brake oil, using a funnel to avoid spilling it onto the engine compartment. Use a jack to lift the vehicle, starting with the rear wheels. Remove the tire and locate the bleeder screw on the brake caliper, then remove the rubber dust cap. Loosen the bleeder screw with a wrench, attach a rubber tube to it, and connect the other end to a drain bottle. Inside the vehicle, start pumping the brakes. If two people are working, one can pump the brakes while the other observes the fluid drainage. Pay attention to the color of the brake fluid in the rubber tube—old fluid is darker, while new fluid is lighter. Once the fluid coming out of the tube is the lighter new fluid, the wheel's fluid change is complete. Stop pumping the brakes, reinstall the tire, and repeat the process for the remaining three wheels. Check the fluid level in the engine compartment reservoir to see if it has reached the lower limit. If it has, add new brake fluid as needed.
6
1
Share

What Causes the ABS Light to Frequently Illuminate?

ABS light illumination can occur in various states, each with different causes and solutions. Details are as follows: State 1: ABS warning light remains constantly on (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting its ability to detect the corresponding speed signal. This prevents the ABS control unit from determining the vehicle speed and wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Loose connections between system wiring or poor contact of the ABS relay lead to signal issues, causing system failure. Solution: Inspect wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off when accelerating. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As engine speed increases, voltage rises, and the ABS light turns off. This may also occur due to insufficient power supply voltage to the ABS system, such as poor terminal contact or grounding issues. Solution: Check battery specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact of the ABS hydraulic valve body; poor electrical connector contact of the ABS hydraulic valve body; ABS control unit failure. Solution: Loosen and retighten the grounding screw of the hydraulic valve body, cleaning the contact surface if necessary; check if connector gaps have widened; replace the ABS or ABS/ASR control unit. State 4: ABS warning light illuminates during high-speed driving. Cause: At high speeds, the ABS control unit detects a significant discrepancy between rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, typically listed on the fuel tank cap sticker. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact of the brake light. Solution: With the engine running, press the brake pedal and manually push the brake switch linkage fully downward, then release the pedal to complete self-positioning; replace the brake light switch if necessary. If the ABS warning light is on, it is advisable to avoid continued driving. An illuminated ABS light indicates a malfunction in the anti-lock braking system. During emergency braking, wheel lock-up can cause the vehicle to skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's path, posing significant safety risks.
14
5
Share

What does 'assist' mean in cars?

When 'assist-plus' appears on the car dashboard, it refers to a parking assistance system. 'Assist' stands for auxiliary braking. Below is relevant information: 1. Function of assist-plus: A safety assistance device used during car parking or reversing, currently the mainstream consists of a reversing camera and in-car display forming the parking assistance system. When reversing, the front display shows real-time video from the rear camera, enhancing reversing safety. 2. Composition of assist-plus: The secondary components include ultrasonic sensors (commonly called probes), controllers, and displays (or buzzers).
11
5
Share

What are the differences between Octavia and Sagitar?

The differences between Octavia and Sagitar are: 1. Different dimensions: Octavia has a length, width, and height of 4675mm, 1814mm, and 1460mm respectively; Sagitar measures 4753mm, 1800mm, and 1462mm. 2. Different trunk volumes: Octavia has a trunk volume of 590 liters, while Sagitar's trunk volume is 553 liters. Octavia is a model launched by SAIC Volkswagen Skoda, featuring front-wheel drive, MacPherson strut front suspension, torsion beam rear suspension, electric power steering, a monocoque body structure, and ventilated disc front brakes.
11
5
Share

How to Adjust Car Headlights for Brightness?

The brightness of car headlights cannot be adjusted; only the height of the lights can be adjusted. If the light brightness is poor, it is recommended to replace them with LED bulbs or xenon headlights. The method to adjust the height of the lights: There are two threaded screws at the back of the car headlights that can be adjusted with a cross-head screwdriver—one for height adjustment and the other for distance adjustment. Simply turn them to the desired height and distance. Car headlights, also known as car front lights or LED daytime running lights, serve as the 'eyes' of the car. They not only relate to the external image of the car owner but are also closely linked to safe driving at night or in bad weather conditions.
1
3
Share

What is Gravity Oil Change?

Gravity oil change involves loosening the drain screw of the transmission oil pan to allow the transmission oil to drain out by gravity, and then adding new transmission oil through the filler port. The advantage of this gravity oil change method is that the operation is relatively simple, and the amount of oil used is relatively small. Engine oil, also known as engine lubricant, functions to lubricate and reduce wear, assist in cooling, seal and prevent leaks, prevent rust and corrosion, as well as dampen vibrations and provide cushioning. Engine oil consists of base oil and additives. The base oil is the main component of lubricating oil, determining its fundamental properties, while additives can compensate for and enhance the performance of the base oil, as well as provide some new characteristics.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.