What is the engine displacement of the Mercedes-Benz G500?

1 Answers
VonBrady
07/30/25 10:16am
Mercedes-Benz G500 is equipped with a 4.0-liter twin-turbocharged V8 engine, so the displacement of this vehicle is 4.0 liters. The Mercedes-Benz G500 is a rugged off-road vehicle from the Mercedes-Benz lineup, which has gained considerable popularity among consumers since its launch. Although positioned as a hardcore off-roader, the G500 delivers exceptionally powerful performance. More details are as follows: 1. The 4.0-liter twin-turbocharged V8 engine in the Mercedes-Benz G500 produces 421 horsepower and a maximum torque of 610 Newton-meters. This engine reaches its peak power output at 5,250 rpm and delivers maximum torque between 2,000 to 4,750 rpm. 2. This engine features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. It is paired with a 9-speed automatic transmission (9AT), known for its smooth shifting and excellent reliability and durability. 3. The Mercedes-Benz G500 employs a double-wishbone independent front suspension and a solid axle non-independent rear suspension. While older models used solid axle non-independent suspensions both front and rear, the newer models have switched to a double-wishbone front suspension to enhance comfort on paved roads. 4. The Mercedes-Benz G500 comes with a full-time four-wheel-drive system and an open differential. Additionally, this vehicle is equipped with three differential locks.
Was this review help?
14
4
Share
More Forum Discussions

What Procedures Are Required for Vehicle Pickup and How Long Does It Take?

The procedures for vehicle pickup depend on whether it's a full payment or a loan. Full payment can be completed within one day, while a loan requires waiting for the bank to disburse the funds before the vehicle can be picked up. Here is an introduction to the vehicle pickup procedures: Vehicle Certificate of Conformity: The Certificate of Conformity is another important document for a vehicle and is essential for vehicle registration. Only vehicles with a Certificate of Conformity meet the national requirements for motor vehicle equipment quality and related standards. Purchase Invoice: The purchase invoice is the most important proof when buying a car and is also one of the documents required for vehicle registration. Therefore, when purchasing a car, be sure to request the purchase invoice from the dealer and confirm its validity. Check the Nameplate: Verify the displacement, manufacturing date, chassis number, and engine number on the nameplate. The numbers on the Certificate of Conformity must match the engine number and chassis number on the vehicle. Vehicle User Manual: Users must operate the vehicle according to the instructions in the user manual. If the vehicle is damaged due to improper use contrary to the manual, the manufacturer will not be responsible for the warranty. The user manual also specifies the main technical parameters of the vehicle and the necessary technical data for maintenance and adjustments, serving as a reference for repairs. Warranty Service Card: According to relevant regulations, if a vehicle experiences malfunctions or damage due to manufacturing quality issues within a certain period and mileage, the warranty service card entitles the owner to free services from the manufacturer. However, consumable parts like bulbs and rubber are not included. Other Documents or Accessories: Some vehicle engines come with a separate user manual, and certain optional equipment may have specific requirements or regulations. In such cases, consumers should request the relevant certificates from the dealer.
9
0
Share

How to Steer the Wheel in Curve Driving?

Methods for steering the wheel in curve driving: 1. When the midpoint of the car's front touches the right yellow line, gradually start turning left—first by half a turn—and keep the left corner of the car's front aligned with the yellow line. If the left corner is about to go beyond the yellow line, turn a bit more. If it doesn't reach the yellow line, slightly adjust back. Continuously make minor adjustments. 2. When the car's front is centered at the curve transition point, quickly straighten the wheel, usually by about one full turn. 3. When the midpoint of the car's front touches the left yellow line, turn right by half a turn initially, then make gradual adjustments to follow the curve. The steering wheel should be adjusted constantly. 4. While turning, glance at the side mirrors to check the distance between the rear wheels and the boundary lines. If one rear wheel is less than 15 cm (the width of the yellow line) from the boundary, adjust the steering wheel to prevent the rear wheel from crossing the line.
11
1
Share

Is it okay to add a bottle of fuel additive to half a tank of gas?

Whether adding a bottle of fuel additive to half a tank of gas will affect the car depends on the mixing ratio specified in the fuel additive's instructions. If the mixing ratio is not 1:2, it may affect the quality of the fuel. Below is some relevant information about automotive fuel additives: Function: Fuel additives, commonly known as the third generation of gasoline detergents (also referred to as gasoline detergents or fuel additives), are designed to address carbon buildup in the fuel system of fuel-injected vehicles, quickly restore the engine to optimal performance, and compensate for certain deficiencies in gasoline while imparting new beneficial characteristics (such as improved atomization, reduced wear, engine protection, and lower emissions). Composition: Fuel additives primarily consist of more than ten components, including nano-molecules, cleaning activation factors, antioxidants, anti-corrosion agents, and demulsifiers. They are specifically developed to target harmful substances in fuel, such as sulfur, gum, and engine carbon deposits, thereby enhancing power, promoting combustion, providing anti-oxidation, anti-wear, cleaning, dispersing, demulsifying, anti-corrosion, and lubricating effects.
9
4
Share

Should Turn Signals Be Used When Reversing into a Parking Space?

Reversing into a parking space does not require the use of turn signals because it does not involve turning. Below are the relevant details for the reverse parking test in Subject 2: Evaluation Criteria: Failure to follow the designated route or sequence results in disqualification. The vehicle body crossing the line or failing to reverse properly leads to disqualification. Exceeding 210 seconds without completing the reverse parking results in disqualification. Stopping midway deducts 5 points each time. Key Operational Points: Reverse from the starting point into the garage, drive from the garage to the return point, reverse from the return point into the garage, and drive from the garage back to the starting point. Maintain a consistent speed throughout using first gear or reverse gear at idle speed; the speed at which you start is the speed at which you should proceed. Control the timing of steering carefully, observing closely during the reversing process to grasp the critical points for steering and turn at the appropriate time.
19
4
Share

Why is the reversing image reversed?

Reversing cameras use far-infrared wide-angle imaging devices installed at the rear of the vehicle, allowing clear visibility of obstacles behind the car through the in-car display. When the reverse gear is engaged, the system automatically activates the high-definition reversing camera located at the rear, displaying the situation behind the vehicle clearly on the LCD screen, enabling the driver to accurately assess the rear road conditions. Below are explanations regarding the left-right reversal of the reversing image: 1. Under normal circumstances, the reversing image on the display screen should not be left-right reversed. If this issue occurs, there are two possible causes. One is that the front and rear cameras are installed in reverse, meaning the front camera was mistakenly installed at the rear. The main difference between front-view and rear-view in-car cameras lies in the mirroring of the image. If a rear-view camera is used as a front-view camera, the image on the display will be left-right reversed. 2. Another possible reason for the left-right reversal of the reversing image could be a setting issue within the system itself. You can re-engage the reverse gear, locate the settings button in the navigation device under the reversing image mode, and check if there is a mirror adjustment or reversing mirror function, then click to turn it off.
2
5
Share

What is the difference between Audi TT and Audi TTS?

Audi TTS is the sport version of the Audi TT, with the biggest difference being in terms of power. There are mainly three differences between the two models: 1. Different drivetrain: The Audi TTS features a front-engine, all-wheel-drive (AWD) system. The Audi TT has a front-wheel-drive (FWD) system. 2. Different engines: The Audi TTS is equipped with a 2.0T-286 horsepower-L4 engine, while the Audi TT comes with a 2.0T-230 horsepower-L4 engine. 3. Different power outputs: The Audi TTS has a maximum power output of 210 kW, whereas the Audi TT has a maximum power output of 169 kW.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.