···
Log in / Register

What is the emission standard of the Hummer H2?

4 Answers
DylanAnn
09/05/25 2:33am

Hummer H2 complies with the China IV emission standard. China IV vehicles: China IV vehicles refer to the national emission standards set for different stages. The primary purpose is to control and reduce vehicle pollutant emissions. As the standards progress, energy savings and emission reductions increase. Compared to China III, China IV has upgraded the post-treatment emission system, reducing pollutant emissions by 50% to 60% compared to China III. Regions where China IV used vehicles can be transferred: China IV used vehicles can be transferred in regions outside key air pollution prevention areas such as Beijing, Tianjin, Hebei, Shanghai, Jiangsu, Zhejiang, Guangzhou, Shenzhen, Zhuhai, Foshan, Jiangmen, Dongguan, Zhongshan, etc.

Was this review help?
14
2
Share
OLucia
09/17/25 3:14am

The Hummer H2 typically meets the China III emission standard, as it was produced between 2002 and 2009 when China was implementing the China III emission regulations. As a large-displacement V8 SUV, it consumes a lot of fuel and emits high levels of pollutants when driven in the city, making it seem outdated in today's China VI era. When buying a used car, be cautious—vehicles with lower emission standards may face driving restrictions, such as being banned from the road in some major cities. It's recommended that owners check the emission information on the vehicle registration certificate or have it tested by a professional agency to ensure compliance with local regulations. For a more environmentally friendly option, consider retrofitting an exhaust purification system, though this requires additional costs and doesn't guarantee success. In short, emission issues affect both convenience and the environment, so clarifying them early can help avoid trouble.

Was this review help?
16
1
Share
Expand All
StOlive
10/31/25 3:45am

From a historical perspective, most Hummer H2 models fall under the China III emission standards. Their production spanned from 2002 to 2009, coinciding with China's transition from China II to China III standards. Emission control systems in vehicles from that era were relatively basic, utilizing catalytic converters and OBD systems, but they fall short compared to modern standards. Having driven similar older vehicles myself, emission issues often lead to annual inspection failures or pollution-related fines. In fact, vehicles with lower emission standards depreciate faster in the used car market and are less favorable for air quality. It's recommended that owners check their vehicle's specific environmental label at the DMV to confirm if it meets China III standards. If the rating is lower, consider upgrading at a repair shop. Environmental protection is a long-term commitment—addressing issues early reduces hassle and saves money.

Was this review help?
12
1
Share
Expand All
MacSadie
12/14/25 3:53am

The Hummer H2's emissions generally meet the China III standard. Produced in the 2000s, it complied with China's emission regulations at that time. This standard means the engine emits higher levels of pollutants like CO and NOx, making it more environmentally damaging compared to newer China VI vehicles. Emission issues may impose usage restrictions, such as traffic bans in certain areas. Owners are advised to check the vehicle's VIN or registration certificate to confirm its emission level. If it's low, consider upgrading the exhaust system through maintenance.

Was this review help?
2
5
Share
Expand All
More Forum Discussions

What is the 0-100 km/h acceleration time for the Leiling Hybrid?

Toyota Leiling Hybrid 1.2T achieves a 0-100 km/h acceleration time of 10.37 seconds. The new-generation Leiling is equipped with a 1.2T inline four-cylinder engine, delivering a maximum power of 85kW (116PS), compliant with China VI emission standards, and paired with a CVT continuously variable transmission. Below is an introduction to the Leiling: 1. Exterior design: It fully incorporates Toyota's latest family design language, with the aggressive and sporty elements mainly reflected in the front fascia. The slim and sharp headlight clusters are connected to the grille, while the black trapezoidal grille on the front bumper is surprisingly large. Combined with the prominently protruding front fenders, it exudes a strong Toyota aesthetic. 2. Interior features: The dashboard design is layered and includes a 12.1-inch central touchscreen, supporting triple-screen linkage (12.1-inch central display, 7-inch instrument cluster display, and HUD head-up display). All models in the lineup come with telematics functionality.
15
4
Share

How Often Should a New BMW Be Serviced in Kilometers?

BMW's official recommendation is to perform a minor service every 10,000 kilometers and a major service every 30,000 kilometers. If the surrounding environment is poor or the oil quality is average, the service interval can be appropriately shortened. Below are some BMW maintenance considerations: 1. Car maintenance cycle; The car maintenance cycle refers to the interval in mileage (reference, images, pricing) or time between services. A high maintenance frequency is not a bad thing, as it can more effectively ensure the vehicle's performance. 2. Cost; In the early stages of car ownership, maintenance mainly consists of routine services, with relatively low costs. However, after the vehicle has been used for a certain number of years or has traveled a certain distance, it enters a repair period, where costs are relatively higher. 3. Maintenance cycle; When determining the car maintenance cycle, it is advisable to refer to the manufacturer's recommended intervals and adjust them appropriately based on the vehicle's technical condition and actual usage. For maintenance cycles recommended by authorized repair dealers, careful consideration is necessary, as dealers also aim to make a profit. Generally, new cars in good condition can have their maintenance cycles extended appropriately, while cars in poor condition or those used in harsh environments should have their cycles shortened.
5
5
Share

What are the dimensions of the Toyota Highlander?

The body dimensions of the Highlander are: 4795mm/1910mm/1730mm (length/width/height). Below is an introduction to the Highlander's engine: 1. In terms of power, the new domestically produced Highlander is equipped with a 2.0T and a 3.5L V6 engine, with maximum power outputs of 220 horsepower and 273 horsepower, and maximum torque of 350N·m and 337N·m, respectively. For the transmission, the 2.0T model still uses a 6AT gearbox, while the 3.5L model is likely to adopt Toyota's latest 8AT transmission. 2. Engine oil level check: Park the vehicle on a level surface. Pull out the dipstick to check the oil level. If the oil level is between the (F) and (L) marks, it is within the normal range. If it is below the (L) mark, add the specified type of engine oil, ensuring the oil level does not exceed the (F) mark after topping up.
1
2
Share

Does an Automatic Transmission Running Above 3000 RPM Damage the Car?

Automatic transmission running above 3000 RPM can significantly shorten the engine's lifespan. High RPM: While the engine can achieve complete combustion at high RPM, reducing carbon deposits, prolonged operation or gear shifts at 3500-4000 RPM subjects vehicle components (engine, transmission, tires, etc.) to excessive torque, leading to reduced longevity. Low RPM: Since engines frequently operate at low RPM, statistics show urban vehicles consume about 30% of fuel in low-RPM conditions. Thus, minimizing fuel consumption in low-RPM scenarios is crucial, which is also the objective of low-RPM control. Normal RPM: In practice, an automatic transmission engine RPM below 2000 is generally appropriate, as most vehicles automatically shift gears beyond 2000 RPM. In sport mode, the RPM may increase by over 500 due to gear mechanism influences, not manual adjustment. During cold starts, idle RPM typically ranges between 1200-1500. This is because the engine temperature is low at startup, requiring higher RPM to quickly raise the engine temperature. At normal operating temperature, idle RPM usually stabilizes at 800-900 RPM. In D gear without throttle input, the speed remains around 5-10 km/h.
15
4
Share

Does an Automatic Transmission Have Gears 1, 2, 3, 4, and 5?

An automatic transmission car has six gear positions, which are P, R, N, D, S, and L. Here are the detailed introductions: 1. Gear functions: P is the parking gear and starting gear. When the car is parked and not in use, the gear is in this position, and the wheels are mechanically locked to prevent rolling. R is the reverse gear, used when reversing. N is the neutral gear, used for temporary parking. Note that this gear position indicates neutral, and to prevent the car from rolling on a slope, the brake must be engaged. D is the drive gear, also known as the forward gear, used when moving forward. L is the low gear, used when going downhill or on long downhill slopes. When the gear is in this position, the car's gear is automatically limited to the lowest gear, allowing the car to use engine power for braking when going downhill, so the driver does not need to press the brake for a long time, which could overheat the brake pads and cause danger. 2. S stands for sport mode. When this gear is engaged, the gears can be freely switched, but the shifting timing is delayed, keeping the engine at high speed for a period to increase the car's power. Using this gear when going downhill will increase fuel consumption.
11
0
Share

Which one to choose between BMW X1 and 3 Series?

The specific choice depends on the consumer's needs. The X1 and 3 Series are completely different models, with differences in body type, exterior design, interior, driving dynamics, and ride comfort. Apart from a slightly similar price range, everything else is different. Moreover, the 3 Series has undergone a significant generational update, while the X1 has not yet been updated. The differences between the BMW X1 and 3 Series are as follows: 1. Configuration: The currently best-selling X1 configuration is the three-cylinder version, which is more affordable and positioned as a family SUV. Due to physical limitations, its handling is not as good as the 3 Series, but it offers slightly more space and practicality than the 3 Series. 2. Body size: The BMW 3 Series measures 4719mm 1827mm 1459mm with a wheelbase of 2851mm; the BMW X1 measures 4565mm 1821mm 1620mm with a wheelbase of 2780mm. 3. Exterior: The BMW 3 Series has a more attractive appearance, featuring larger kidney grilles and unique 'small lion claw' headlight designs that stand out. Regardless of personal taste, the design is innovative and maintains a sporty vibe.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.