···
Log in / Register

What is the emission standard of BMW e90?

6Answers
LeahFitz
08/31/2025, 02:41:33 AM

BMW e90 meets the China V emission standard. Concept of China V standard: The China V emission standard, officially known as the National Fifth Stage Emission Standard for Motor Vehicles, is equivalent to the Euro 5 emission standard currently implemented in Europe. The European Union has been enforcing this standard since 2009, which imposes stricter limits on nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter emitted by vehicles. China V standard reduces pollutant emissions by 10%: Compared to the China IV gasoline standard, the sulfur content in the China V standard is significantly reduced. According to calculations by the National Standardization Committee, the implementation of this standard will greatly reduce vehicle pollutant emissions. It is estimated that in-use vehicles can reduce nitrogen oxide emissions by approximately 300,000 tons annually, and new vehicles can reduce nitrogen oxide emissions by about 90,000 tons cumulatively over five years.

Was this review help?
109
Share
StClara
09/12/2025, 11:04:47 PM

I've driven several BMW E90s, which is the fifth generation of the BMW 3 Series, produced approximately from 2005 to 2013. In the Chinese market, the emission standards mainly depend on the specific production year. The China III standard was implemented starting from July 2007, so E90s produced before 2007 might not meet the standard, while those from 2007 onwards generally comply with China III. I've checked some data, and cars around 2010 were upgraded to the China IV standard. When buying a used car, pay special attention to this, as poor emissions can affect the annual inspection, making it easy to fail the exhaust test. My own method to confirm is checking the environmental protection mark on the vehicle registration certificate or decoding the VIN online to check the standard. If you're unsure about the emission level, it's best not to proceed, to avoid future repair hassles, as maintaining the emission system isn't cheap either. With stronger environmental awareness, choosing a low-emission car is more worry-free and responsible.

Was this review help?
10
Share
Expand All
Teresa
10/26/2025, 11:50:11 PM

I'm an average car owner who once owned a 2008 BMW E90 with China III emission standards. This car was produced after 2007 when China had just implemented the China III standard, and many imported models were adjusted accordingly. Emission standards are crucial—if your vehicle fails to meet them during the annual inspection, you'll have to repeatedly visit testing stations, wasting both time and money. A friend of mine bought a 2006 E90 too early, and its emissions didn’t comply, resulting in restricted access to urban areas. My advice is to ask the seller for the production year and photos of the registration certificate before purchasing, ensuring it clearly states China III. Cars with lower emissions are better for the environment, and personally, I prefer buying used models that meet China IV standards—their engines are cleaner and maintenance is simpler. Checking the specific standards isn’t difficult; you can do it through online DMV websites or by consulting professional agencies to decode the vehicle number.

Was this review help?
17
Share
Expand All
SanEmilia
10/26/2025, 11:52:09 PM

I just bought a used BMW E90, manufactured in 2012, meeting China IV emission standards. Production years range from 2005 to 2013, with emission standards varying by year. After 2007, China III was common, while China IV became more prevalent after 2010. The verification method is simple - just check the vehicle registration certificate or VIN code. Cars with poorer emissions may face issues during annual inspections, especially in big cities with stricter environmental regulations. Once you confirm the standard, you can drive with peace of mind and reduce environmental impact. Doing thorough research before purchasing saves trouble.

Was this review help?
9
Share
Expand All
McMiranda
12/09/2025, 11:06:02 PM

I care about environmental issues. The BMW E90's emissions are classified as either China III or China IV depending on the production year. Models before 2007 may fall below China III standards, with improvements made afterward. Vehicles with higher tailpipe pollution are less eco-friendly, while China IV standards are cleaner and more beneficial to the environment. When purchasing a car, it's advisable to check the certificate to confirm the emission level. The E90's engine design affects pollution levels, with models equipped with after-treatment systems being superior. Confirming emissions helps reduce the burden on our planet and safeguards health.

Was this review help?
18
Share
Expand All
ThomasLynn
01/30/2026, 12:17:09 AM

With over a decade of experience in auto repair, I've dealt with numerous E90 emission issues spanning from China III to China IV standards. Pre-2007 models had poor emission control, while post-2007 vehicles complied with China III, upgrading to China IV by 2010. When owners inquire, I advise checking the vehicle registration or VIN to confirm the standard. Annual inspection difficulties often lie in the emission system, where sensor or catalytic converter failures easily cause non-compliance. For maintenance, choosing OEM parts is more reliable to ensure exhaust meets standards. Thorough understanding of these standards makes repairs smoother.

Was this review help?
6
Share
Expand All
More Q&A

At what level of body vibration can a hill start be initiated?

Hill start requires the vehicle to vibrate to the semi-engaged clutch state. Concept: Hill start is a field test in the second subject of the driver's license examination, which involves starting a vehicle parked on a steep slope upwards. After positioning the vehicle correctly, the test technique is to firmly pull up the handbrake and then pull it two more times to ensure the handbrake is tightly secured to avoid rolling back. Technique: Shift to first gear, release the handbrake, gently release the clutch, and proceed up the slope once the vehicle is stable. Try to stay within 30 centimeters of the side line, control the clutch as much as possible, and keep the vehicle speed as slow as possible. For the stop at the designated point, use a reference object aligned with the marker pole to ensure the front of the vehicle is aligned with the pole, thus achieving accurate positioning.
109
Share

Reasons for Abnormal Drive Unit in BMW X1?

Reasons for abnormal drive unit in BMW X1 include: 1. The onboard computer fails to respond promptly, causing program malfunction; 2. Damage to the fuel pump or fuel pump sensor; 3. Faulty fuel injectors; 4. Damaged ignition coils; 5. Worn-out or carbon-fouled spark plugs; 6. Turbocharger wastegate valve failure, potentially due to clogged internal filter screen; 7. Incorrect vacuum hose connection on the turbo wastegate valve; 8. Burnt-out relay in the right-side fuse box of the rear trunk; 9. Malfunctioning VANOS solenoid valve; 10. Loose or damaged camshaft position sensor screws. BMW is a German automotive brand under the BMW Group, featuring model series such as i, X, Z, pure numeric (4 series), 1, 2, 3 series, and the performance-enhanced M series based on these models.
112
Share

Emgrand EV Wiper Blade Size

Emgrand EV wiper blade size The original wiper blade size for the Emgrand EV is 22/16, but 24/16 can also be used normally. Regularly use approved glass cleaner to clean the windshield and ensure the windshield is thoroughly cleaned before replacing the wiper blades. Only use wiper blades of the same specifications as the original wiper. If the wiper or windshield is covered or frozen by ice and snow, remove the ice and snow from the wiper and glass before using the wiper to avoid damage. Do not use the wiper when the windshield is dry or has hard objects on the surface, as this may damage the wiper blades and windshield. Clean the wiper blades in warm soapy water and regularly check their condition. Frequently clean the windshield and try to avoid using the wiper blades to scrape sand and mud on the windshield, as this may affect the wiper's performance and reduce its service life. If the rubber is found to be hardened or cracked, or if the wiper leaves scratches on the window or fails to clean a certain area, the wiper blades need to be replaced.
120
Share

When to Change Engine Oil?

There is no fixed interval for changing engine oil, as it depends on actual driving conditions and vehicle status. Different types of engine oil have different replacement cycles. The details are as follows: 1. Engine oil can be divided into mineral oil, semi-synthetic oil, and full-synthetic oil. If mineral oil is used, it is generally recommended to change it every six months or around 5,000 kilometers; if semi-synthetic oil is used, change it every 7-8 months or around 7,500 kilometers; if full-synthetic oil is used, it can be changed after one year or around 10,000 kilometers. 2. For new cars, it is best to change the engine oil around 2,500 kilometers to better remove metal debris generated during the engine break-in period. Vehicles with low mileage can change the oil once a year, provided synthetic oil is used. For vehicles frequently driven or used in low-temperature conditions, it is recommended to change the engine oil and oil filter every 5,000-7,000 kilometers for optimal performance.
117
Share

How often should gear oil be changed under normal circumstances?

Under normal circumstances, gear oil should be changed every 60,000 kilometers, which can effectively improve the efficiency of gear transmission of engine power. When the vehicle is driving at high speed, some metal debris worn from gears, bearings and other components will deposit in the gear oil, and the rotation of the gears will also increase the oil temperature. If it is not replaced for a long time, it will cause transmission failure. Gear oil is transmission oil, which can reduce the wear of gears and other moving parts, prolong gear life, reduce friction, reduce power loss, and also disperse heat, play a certain cooling role, prevent corrosion and rust, reduce working noise, reduce vibration and impact between gears. Due to different transmission designs divided into manual transmission and automatic transmission (also divided into CVT, AMT, etc.), each transmission design has different technical requirements; Even the same type of transmission configured in different models has different torque, weight, speed, structure, etc. Therefore, the original factory has its own designated special transmission oil.
102
Share

What are the maintenance items for a vehicle at 20,000 kilometers?

At the 20,000-kilometer maintenance, the engine oil, oil filter, air filter, and cabin air filter should be replaced, along with some routine inspections. The details are as follows: 1. Air filter: Proper installation of the air filter can reduce wear on components such as cylinders, pistons, and piston rings. Generally, it should be cleaned every 5,000 kilometers and replaced every 10,000 kilometers. 2. Oil filter: Proper installation of the oil filter prevents impurities from mixing into the engine oil during use, avoiding wear on moving parts and oil passage blockages. When changing the lubricating oil, the oil filter must also be replaced; otherwise, it may affect the quality of the lubricating oil. The replacement cycle for engine oil and the oil filter is typically every 5,000 kilometers. 3. Fuel filter: Proper installation of the fuel filter prevents cylinder wear caused by impurities and moisture mixed into the gasoline during storage, transportation, and refueling. To ensure optimal engine performance, the fuel filter should generally be replaced every 20,000 kilometers or once a year.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.