···
Log in / Register

What is the driving sequence for going straight, turning left, and turning right?

1Answers
HoldenLee
08/30/2025, 03:37:24 AM

The driving sequence for going straight, turning left, and turning right is: yield to vehicles coming from the right, turning vehicles yield to straight-going vehicles, and right-turning vehicles yield to left-turning vehicles. These three rules are prioritized from 1 to 3. If the actual situation meets the first rule, the other two rules need not be considered. If the first rule does not apply, then the second rule is considered, and so on. Yield to vehicles coming from the right: When your vehicle is turning and a vehicle from the right lane is also turning, yield to the vehicle from the right lane. Turning vehicles yield to straight-going vehicles: Turning motor vehicles must yield to straight-going motor vehicles. Right-turning vehicles yield to left-turning vehicles: For vehicles traveling in opposite directions, right-turning vehicles must yield to left-turning vehicles. According to the "Road Traffic Safety Law," at intersections without traffic signs or markings, vehicles must stop and observe before entering the intersection, yielding to vehicles coming from the right. Turning motor vehicles must yield to straight-going vehicles. Right-turning motor vehicles traveling in opposite directions must yield to turning vehicles. For vehicles traveling in opposite directions, left-turning vehicles must yield to straight-going vehicles, and right-turning vehicles must yield to left-turning vehicles. This means that among the three driving states—going straight, turning left, and turning right—right-turning vehicles have the lowest right of way.

Was this review help?
112
Share
More Q&A

What is the normal pressure standard for automotive air conditioning R134a?

Automotive air conditioning R134a normal pressure standard: Low-pressure side: 104kPa-201kPa, High-pressure side: 1785kPa to 1916kPa. Here is relevant information about automotive air conditioning pressure: 1. Description: At idle speed (engine 700-900rpm), if the ambient temperature is high, such as under direct summer sunlight, the high pressure may be slightly higher, up to about 2.5-2.8 MPa, but generally should not exceed 3.1 MPa. 2. Precautions: After the air conditioner has been running normally for a while, the air blowing on you should feel cool and quickly reach the set temperature. The outdoor compressor should work intermittently like a refrigerator - this indicates normal operation. Otherwise, refrigerant may be needed. Use a thermometer to measure the temperature difference between the air inlet and outlet of the indoor unit. A difference of more than 8°C is normal - the greater the difference, the better the air conditioner is working (good performance can reach about 15°C). If the difference is below 8°C, refrigerant may need to be added.
116
Share

Why does the Honda XRV automatic transmission stall when braking?

Honda XRV automatic transmission stalling when braking may be due to the activation of the auto start-stop system. Below are the specific reasons: Principle of auto start-stop stalling: The auto start-stop system is essentially a system that controls the engine's shutdown or ignition. Its core function is to automatically control the engine's shutdown or ignition based on vehicle speed and stopping time during driving, aiming to minimize fuel consumption and emissions during idling. It is primarily suitable for urban traffic situations such as waiting for traffic lights or being stuck in traffic. After the engine shuts down, the power supply can still replace the belt pulley to provide operating power for the engine cooling fan and the car's air conditioning system. Features of auto start-stop: The auto start-stop system has many advantages, such as reducing fuel consumption during idling, thereby saving fuel. In urban traffic situations like waiting for traffic lights or being stuck in traffic, it can significantly reduce the engine's idling time. However, frequent engine starts and stops can cause damage to related components such as the starter and battery. Additionally, due to the frequent repeated starts and stops of the engine, there is a higher demand for oil quality, which further increases maintenance costs.
120
Share

What to do if the Haval H6 transmission fails?

It may be a failure of the transmission computer or electronic components. Go to a professional repair shop for inspection and replace the damaged electronic components. If the transmission oil contains impurities or is severely insufficient, add or replace the transmission oil, and have a professional conduct a comprehensive inspection of the transmission to completely eliminate the problem.
104
Share

How to Read the Fuel Gauge on a Geely Car?

The dashboard of the Geely car is equipped with a fuel gauge, which displays the remaining fuel level after the car is started. The fuel gauge uses the letters E and F to indicate the fuel level, where E stands for insufficient fuel and F represents a full tank. The scale lines can also be used to check the amount of fuel. For example, if the fuel tank capacity is 50L, each scale line represents 10L, allowing you to estimate how much fuel is left.
120
Share

What size tires are suitable for 18-inch rims?

18-inch rims require R18 tires, with a recommended width between 225mm and 235mm. Here are the details: 1. The appropriate tire size for 18-inch rims depends on the rim width in inches. 2. Standard 18-inch rims with a 7.5-inch width are best suited for 225mm wide tires. 3. Wider rims can accommodate 235mm wide tires. 4. Larger 18-inch rims with a 9-inch width are suitable for 255mm wide tires, with a maximum of 265mm. 5. Wider tires provide better mid-to-high speed acceleration and braking performance. Even wider rims and tires exist but are not suitable for civilian vehicles. Tires are the only components of a car that make contact with the road, playing a crucial role in driving stability and safety.
108
Share

What to Do When Ford Focus Has Poor Acceleration, Dull Sound, and Loud Noise?

Many people believe that throttle carbon buildup can affect engine acceleration performance. However, valve carbon buildup mainly causes unstable idling and has little impact on engine acceleration performance. A clogged or waterlogged air filter can reduce airflow, leading to an overly rich air-fuel mixture, incomplete combustion, poor acceleration, and severe black smoke from the exhaust pipe. Insufficient fuel pump pressure can cause poor fuel supply, resulting in weak acceleration. Poor fuel injector atomization can lead to uneven cylinder operation or misfiring, affecting acceleration performance. A faulty mass airflow sensor can reduce intake air volume, causing an overly rich or lean air-fuel mixture, which impacts acceleration performance. Additionally, a damaged spark plug in an individual cylinder can also affect acceleration.
107
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.