What is the distance between parallel parking and the yellow line?

2 Answers
PrestonAnn
07/25/25 4:49pm
Parallel parking should maintain a distance of 20cm from the yellow line. Here are the precautions for parallel parking: 1. Adjust distance: Properly adjust the distance between the vehicle body and the edge of the parking space, as well as the distance between the vehicle body and the parking space, avoiding being too close to the parking space. 2. Align properly: Ensure accurate alignment when steering. 3. Entering/exiting the space: Activate the left turn signal when entering the parking space, and avoid running over the corner of the parking space when exiting. 4. During operation: Do not stop midway, roll back, stall, or cross lines during the entire process. 5. Use turn signals: Remember to activate the turn signal when exiting from parallel parking. Points are deducted for turn signal usage, 30cm margin, and line crossing issues.
Was this review help?
7
5
Share
LeMax
08/11/25 9:58pm
As a seasoned driver with over a decade of experience, maintaining the right distance from the yellow line during parallel parking is crucial. I usually keep my wheels about 30 centimeters away from the yellow line. If you park too close, the wheels might scrape against the curb or the yellow line, damaging the tires or chassis. On the other hand, parking too far out means your car protrudes into the road, obstructing traffic and increasing the risk of collisions with other vehicles. Normally, I just glance at the yellow line in the rearview mirror to ensure the rear wheels are roughly parallel. I remember when I first started driving, I parked too far out in my neighborhood and got a ticket. Later, I learned to measure the distance with my foot—about the length of a shoe. Now, I always slow down in advance, signal, and ease into the parking spot slowly for better distance control. On rainy days, I’m extra cautious—slippery roads and poor visibility mean I leave a bit more space for safety. In short, this distance is key to ensuring safety for yourself and others. Don’t cut corners—practice makes perfect.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

Will Driving Without a License Disqualify You from the Exam?

Driving without a license will not disqualify you from the exam. Driving a motor vehicle without obtaining a motor vehicle driver's license, or while the license is revoked or temporarily suspended: Handing over a motor vehicle to someone who does not have a motor vehicle driver's license or whose license has been revoked or temporarily suspended will result in penalties from the traffic management department of the public security authorities. Driving without a license during the driver's license examination period: It will not disqualify you from the exam, but you must undergo the necessary penalties before you can continue with the examination. Driving without a license: When a motor vehicle driver operates a motor vehicle without undergoing specialized driver training school's driving skill training and examination, and thus without obtaining a motor vehicle driver's license, it is considered driving without a license.
7
4
Share

Where is the fuel pump fuse located in the Geely Vision?

The fuel pump fuse in the Geely Vision is located inside the engine compartment fuse box. Fuel pump fuse: When a circuit malfunctions or experiences abnormalities, accompanied by continuously rising current, the increased current may damage certain critical or valuable components in the circuit, or even burn out the circuit and cause a fire. The fuse serves to protect the circuit and prevent accidents. Daily maintenance: Regularly replace electrical system fuses and verify the rated current marked on the fuse. Periodically clean the engine and remove dirt around the fuel pump to prevent spark plug blockage, which could affect the circuit and hinder normal operation.
17
0
Share

How to Adjust the Headlight Height on a Camry?

Camry headlight height adjustment method: 1. Pull the engine compartment lock lever inside the car to unlock the engine compartment; 2. Press the lever at the front of the engine compartment hood and lift it up; 3. Use the hydraulic support to prop up the engine compartment hood; 4. Locate the headlight height adjustment button in the engine compartment, and use a screwdriver to turn the adjustment knob to adjust the vehicle's headlight height. Turning it upward raises the headlights, while turning it downward lowers them. In terms of power, the Camry 2.0 model is equipped with a 2.0L engine, paired with a Direct Shift CVT transmission, delivering a maximum horsepower of 178 and a maximum torque of 210 Nm. For the interior, the car features a two-tone color scheme, enhancing its stylish appeal. The dashboard design is very unique, angled toward the driver for easier operation and visibility.
9
2
Share

What material is the black plastic shell of the headlight?

The black plastic shell of the headlight is made of polycarbonate plastic. Reasons for using polycarbonate plastic: Compared to glass, plastic has strong elasticity. Under non-violent impact conditions, it has a buffering effect and is not easily broken. Even if it breaks, it causes much less harm to pedestrians or animals on the road than glass. Plastic is better than glass in terms of mechanical properties, strong plasticity, stable chemical properties resistant to acid and alkali corrosion, and light weight. Glass: In the past, vehicles used glass lamp covers mainly due to technological limitations at that time. The strength and transparency of plastic could not match the high transparency of glass, and it could not maintain its shape and color under strong light or high temperatures. Nowadays, plastic lamp covers can achieve the transparency and color stability of glass, and glass is significantly heavier than plastic.
17
0
Share

What's the reason for the low beam not working on a regular Santana?

Reasons for the low beam not working on a regular Santana. Possible causes: Open circuit or grounding in the power line before the light switch, tripped or burnt fuse in the circuit, poor contact or failure to close at the bimetallic strip contacts of the light switch, or damage to the light switch. When a certain gear of the light switch is engaged, grounding in some light circuits may cause the bimetallic strip contacts to open. Fault diagnosis and troubleshooting steps should first determine the diagnostic scope: Follow the lighting system circuit sequence to inspect and locate any open circuits or short circuits. If the dashboard shows the low beam is on but the low beam indicator doesn't light up, it could be due to a faulty transformer or a burnt bulb. It's recommended to visit a professional 4S shop for maintenance and inspection.
2
3
Share

Are the engines and transmissions of Jetta and Lavida the same?

Lavida and Jetta have the same engine and transmission. Lavida and Jetta engines: Their engines are the same, both belonging to the EA211 series, and even the transmissions are identical. Lavida manual 1.6 and Jetta 1.6 engines are different: The differences between them are in maximum torque, maximum horsepower, maximum power, and fuel consumption. Lavida manual 1.6: maximum torque 225/1400-3500, Jetta 1.6: maximum torque 155/3800, Lavida manual 1.6: maximum horsepower 131, Jetta 1.6: maximum horsepower 110, Lavida manual 1.6: maximum power 96/5000, Jetta 1.6: maximum power 81/5800, Lavida manual 1.6: fuel consumption 6.9, Jetta 1.6: fuel consumption 5.2.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.