What is the displacement of the Volvo V90?

1 Answers
LeLeah
07/30/25 6:58am
The Volvo V90 is equipped with a 2.0-liter turbocharged engine, so the displacement of the Volvo V90 is 2.0 liters. Here is some relevant information about the Volvo V90: 1. The wheelbase of the Volvo V90 is 2941 millimeters, and its length, width, and height are 4939 millimeters, 1879 millimeters, and 1543 millimeters respectively. 2. The 2.0-liter turbocharged engine of the Volvo V90 has a maximum power of 187 kW and a maximum torque of 350 Nm. The engine's maximum torque speed ranges from 1500 to 4800 rpm, and its maximum power speed is 5500 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with an 8-speed automatic transmission (8AT). The 8AT transmission offers smooth shifting, which enhances the car's ride comfort. 3. The front suspension of the Volvo V90 uses a double-wishbone independent suspension, while the rear suspension employs a multi-link integral rear axle.
Was this review help?
20
2
Share
More Forum Discussions

How to turn on the locking sound of Volkswagen Passat?

The method to set the locking sound for the Passat is: In the car's onboard computer settings, select the locking option, and click 'Lock On' to enable the locking horn sound function. Introduction to the Volkswagen Passat: 1. The Volkswagen Passat features a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150 PS, a maximum torque of 250 Nm, and a maximum power of 110 kW, paired with a 7-speed dual-clutch transmission. 2. The Passat has a length of 4933 mm, a width of 1836 mm, a height of 1469 mm, a wheelbase of 2871 mm, a trunk capacity of 521 liters, and a curb weight of 1470 kg.
8
2
Share

Do the engine and transmission use the same oil?

Engine and transmission use different oils. Although both serve a lubricating function, their specific roles are distinct and should not be confused. Engine oil is the lubricant for the engine system, possessing properties such as oxidation resistance, anti-wear, and corrosion prevention. Transmission oil, on the other hand, is primarily used to keep the gear system clean and extend the lifespan of internal transmission components. Engine oil has higher requirements for high-temperature resistance, oxidation resistance, and cleanliness, and different types of engines use different oils. Although the transmission operates at relatively lower temperatures, its internal components also require lubrication. Transmission oil can extend the service life of gears, offers low-temperature resistance, and reduces oil loss under harsh operating conditions.
2
4
Share

What documents are needed to buy a car?

Documents required include personal ID card, two copies of ID card, household register, bank card, and driver's license. Below are relevant details about purchasing a car: Documents needed for different purchase scenarios: For private purchases, bring your ID card. Non-locals need to bring a residence permit. For corporate purchases, bring the company's business license and organization code certificate (companies with the three-in-one certification only need the business license). Corporate purchases also require an authorization letter for the agent, who must bring their own ID card. Since purchasing a car requires substantial funds, bring a bank card for payment and avoid carrying cash. For loan purchases, bring proof of funds and income. Documents to obtain after purchase: Vehicle certificate of conformity, purchase invoice, verification of the nameplate, vehicle user manual, three-guarantee service card, and other documents or accessories.
3
4
Share

How to reset the maintenance light of the 2019 Senova D50?

The method to reset the maintenance light for the 2019 Senova D50 is: 1. Turn off the key and hold down RESET. 2. Turn the key to ON, then release RESET. 3. Hold down INFO for a few seconds until you see the maintenance reset option. 4. Press INFO to confirm and press RESET to complete. Introduction to the 2019 Senova D50: 1. The 2019 Senova D50 is a compact car with dimensions of 4630mm in length, 1820mm in width, 1480mm in height, and a wheelbase of 2670mm. It is a 4-door, 5-seater sedan. 2. The 2019 Senova D50 is equipped with a 1.5L L4 engine, naturally aspirated, with a maximum horsepower of 113ps and a maximum torque of 148nm.
10
4
Share

How early can the vehicle annual inspection sticker be obtained?

Vehicle annual inspection stickers can be obtained 3 months in advance. Below is relevant information about vehicle annual inspections: Introduction to vehicle annual inspection: The timing of vehicle annual inspections is not calculated based on specific dates, but rather by month. If a vehicle's annual inspection is due on September 10th, the inspection can be conducted in advance during July, August, or September. Important notes: Vehicles that fail to undergo annual inspection on time and continue to be driven will be subject to fines and 3 penalty points, and the vehicle may be impounded. If the annual inspection is overdue, previously purchased vehicle insurance will not be valid. In case of any traffic accidents during this period, the insurance company will not provide compensation.
13
3
Share

How to Reset the Tire Pressure Monitoring Light on the Outlander?

The method to reset the Outlander's tire pressure light is as follows: When the warning light comes on, locate the tire pressure reset button below the left side of the steering wheel. Press and hold it for a few seconds until the tire pressure warning light turns off, indicating a successful reset. If manual reset fails, professional technicians should be consulted to clear the fault code. The steps to reset the Outlander's tire pressure warning light are detailed below: 1. Drive slowly to a safe location and park. Turn off the engine, wait for 1-2 minutes, and then restart the vehicle. After the vehicle stabilizes, check the tire pressure values displayed on the dashboard. 2. Both underinflation and overinflation can trigger the tire pressure light. Drive slowly to a car repair shop or auto beauty shop to adjust the tire pressure. If you have a personal inflation device, you can adjust the tire pressure on the spot. 3. While inflating or deflating the tires, observe the tire pressure light on the dashboard. Stop inflating once the light turns off. If overinflated, release the excess air. 4. If the tire pressure light remains on after adjustment, a manual reset may be required. Locate the settings button on the vehicle's central console, typically labeled 'SET,' to reset the tire pressure. 5. If the vehicle does not support manual operation, ensure the tire pressure is normal and have a technician use a specialized diagnostic tool to clear the fault code.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.