What is the displacement of the Changan Yuexiang?

1 Answers
StElizabeth
07/29/25 3:55pm
The displacement of the Changan Yuexiang is 1.4 liters or 1.5 liters. The 1.4-liter naturally aspirated engine of the Changan Yuexiang has a maximum power of 74 kW and a maximum torque of 135 Nm, with the maximum power achieved at 6000 rpm and the maximum torque achieved between 3500 to 4500 rpm. This engine is equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 5-speed manual transmission. The 1.5-liter naturally aspirated engine of the Changan Yuexiang has a maximum power of 78.5 kW and a maximum torque of 145 Nm, with the maximum power achieved at 5500 rpm and the maximum torque achieved between 3500 to 4500 rpm.
Was this review help?
19
0
Share
More Forum Discussions

What is the normal temperature range for tires?

The optimal operating temperature for dry tires is between 90 and 110 degrees Celsius, and the tire warmers are always maintained within this optimal range. Here are specific details about tire functions: 1. Enabling driving operations: Tires serve as the medium for force transmission between the vehicle and the road, transmitting driving force, braking force, steering force, etc., thereby enabling operations such as driving, braking, and steering. 2. Supporting vehicle load: The vehicle's load causes the tire to compress until the average pressure on the tire's contact area balances with the internal inflation pressure. 3. Reducing and absorbing vibrations and impacts during driving: This prevents early damage to vehicle components caused by severe vibrations. Additionally, tires adapt to high-speed driving conditions, reduce driving noise, and ensure safety, comfort, handling stability, and fuel efficiency.
5
2
Share

What are the symptoms of a broken manual transmission shift cable?

Manual transmission shift cable failure can affect normal gear shifting. Before the shift cable breaks, you may experience difficulty when pressing the clutch pedal, have trouble engaging gears, or find it hard to fully engage a gear. If the shift cable head becomes detached from the gear selector head, or if the clutch cable breaks, it can result in complete inability to shift gears. Below are related explanations: 1. Consequences of clutch failure: When the clutch cable breaks, it means the clutch fails. Without a functioning clutch, starting in gear or shifting gears becomes extremely difficult. 2. Transmission construction and principle: The transmission's function is to change gear ratios to meet different driving conditions' traction requirements, allowing the engine to operate under optimal conditions while meeting possible speed requirements. It also enables reverse driving to meet the need for vehicle backward movement.
2
0
Share

What Causes the BMW Fuel Gauge Needle to Stop Moving?

The reasons for the fuel gauge needle not moving are: issues with the fuel float or problems with the fuel gauge wiring. Below are the relevant details: 1. For older vehicles, it is likely that the fuel float is malfunctioning: The fuel float is commonly referred to as the fuel level sensor. You can check whether the fuel level sensor plug on the fuel tank is loose and observe if there is any obstruction during the sliding process of the fuel level sensor. It is recommended to take the vehicle to a car repair center to connect the two fuel float wires. If the fuel gauge needle goes to the top, it indicates that the fuel float is faulty. If the needle does not move immediately after refueling, it might be because the fuel float is pushed to the top of the tank by the buoyancy of the fuel. As the vehicle consumes fuel during driving, the fuel float will descend, and the fuel gauge needle will then move with the sensor. 2. Check if there is an issue with the fuel gauge wiring in the car's dashboard: The dashboard should be removed, and a multimeter and a pin can be used to accurately inspect the corresponding fuel gauge wiring on the dashboard. The car's fuel level gauge displays the amount of gasoline in the vehicle. It is important to note that when the fuel gauge needle drops below the red line and the warning light comes on, although the car can still travel 30-40 kilometers, it is not advisable to wait until the fuel warning light comes on before refueling.
5
2
Share

What are the consequences of insufficient water in the radiator?

Insufficient water in the radiator can lead to a relative decrease in the engine's cooling capacity, causing the lubricating oil to thin and reducing its lubrication quality. The function of the car radiator: The car radiator, also known as the heat exchanger, is a key component in the car's cooling system. Its purpose is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to release the heat, and then returns to the water jacket to circulate, achieving temperature regulation. How the car radiator works: The radiator is a crucial part of a water-cooled engine. As an essential component of the water-cooled engine's cooling circuit, it absorbs heat from the engine block to prevent overheating. Due to water's high specific heat capacity, the temperature rise after absorbing heat from the engine block is not significant, so the engine's heat is dissipated through the liquid circuit of the coolant.
12
0
Share

What Are the Hazards of Seat Belt Adjusters?

Seat belt adjusters are not safe. Although they can adjust the height of the seat belt, there is a significant difference in height between children and adults. Using an adjuster cannot ensure the safety of children. Children must use dedicated child safety seats when riding in a vehicle. Below is an introduction to related content: 1. Age range for child safety seats: Child safety seats are designed for children aged 0 to 12 years old, with a weight limit of 72 pounds or less. The primary function of a child safety seat is to enhance the safety of children during car rides. The seat belts used in child safety seats are not conventional ones; they have now evolved to six-point harnesses, which provide additional safety. 2. Installation position of child safety seats: They can only be installed in the rear seats of the vehicle. The best position is behind the front passenger seat, as the safest spot in a vehicle is behind the front passenger. Securing the seat belt directly to the vehicle's seat requires specialized connectors. In Europe and the United States, there are mandatory regulations requiring children to use safety seats when traveling in a car.
10
0
Share

Will the Engine Stall When Braking in Half-Clutch State?

No. Here are the detailed explanations: 1. Reason: The half-clutch state means the clutch is between disengagement and full engagement, and the transmission system is between connected and disconnected states. It provides flexible power output, which is frequently used in complex road conditions, starting, turning, and short-distance following. When the clutch is in the half-clutch state, the friction between the pressure plate and the friction disc is less than in the fully engaged state. 2. Power: Hill starts are the most challenging for clutch control. Compared to starting on flat ground, hill starts are more difficult because of increased resistance. The clutch needs to be lifted slightly higher (you may feel the car vibrate more than on flat ground) to ensure sufficient power; otherwise, the car may roll backward when the brake is released.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.