What is the displacement of an engine with 2499 cc?

1 Answers
DelEden
07/30/25 6:05am
The displacement of this car is 2499 milliliters, which is equivalent to a 2.5-liter displacement. Engine displacement: Engine displacement, commonly referred to as displacement, generally refers to gasoline engines; diesel engines are not categorized this way, as diesel engines are usually classified by the number of cylinders. Displacement refers to the volume of fluid drawn in or expelled per stroke or cycle. Engine usage precautions: It is essential to use engine oil of the appropriate quality grade, as this is key to ensuring the engine operates normally. Choose oil with the right viscosity, selecting the appropriate viscosity based on local temperatures. Maintain good crankcase ventilation, as gases entering the crankcase from the combustion chamber are corrosive and can oxidize the oil, degrade its quality, and contaminate the engine. Therefore, it is crucial to keep the crankcase well-ventilated.
Was this review help?
8
1
Share
More Forum Discussions

What is the wheel size of the Audi Q5L?

Audi Q5L wheel 19-inch parameters are 235/55-R19. The tire width is 235 millimeters, 55 is the aspect ratio, which is the ratio of the tire sidewall height to the tire section width, and 55 represents 55%. R19 refers to the use of 19-inch rims. Precautions for using Audi Q5L tires are as follows: 1. Maintain correct tire pressure: Tire pressure is an important factor affecting tire life. It should not be too high or too low. Inflate according to the tire pressure indicated on the vehicle. 2. Check wear conditions: Frequently check the tires for abnormal wear and observe whether the tread depth on both sides of the tire is consistent. There is a wear limit mark on the tire, and the tire must be replaced when it wears to this mark. 3. Regularly check tire conditions: Remove small stones and other foreign objects from the tire tread in time, and check whether the tire has bulges, cracks, or aging rubber on the valve stem. Pay attention to the wear on the tire tread and edges, which may be caused by poor alignment or abnormal tire pressure. 4. Check wheel alignment and balance in time: If the tire shows uneven wear, pulling, vibration, or abnormal steering, check the tire alignment and balance immediately. These conditions not only shorten tire life but also affect the vehicle's handling performance.
12
2
Share

What type of gasoline should be used for the Audi Q5L?

The manufacturer recommends using 95-octane gasoline for the Audi Q5L. Below is relevant information about automotive gasoline: 1. Gasoline octane rating: Refers to the octane number indicating anti-knock performance. The higher the octane rating, the better the anti-knock performance. The octane rating of gasoline used in a car is determined by the engine's compression ratio. A higher compression ratio requires gasoline with better anti-knock performance. Lower-octane gasoline (e.g., 92, 93, etc.) is more easily ignited during piston operation, while higher-octane gasoline (e.g., 95, 98, etc.) is relatively harder to ignite. 2. Precautions: 95-octane and 98-octane gasoline should not be mixed. Long-term mixing of different octane ratings will affect the service life of the car's ignition system, fuel injectors, and spark plugs, advancing the vehicle's major maintenance schedule. However, since their chemical compositions and other aspects are relatively similar, with strong anti-knock properties, short-term mixing of different octane ratings generally does not require special vehicle maintenance. Whenever possible, strictly follow the vehicle's requirements to use the corresponding octane-rated gasoline.
2
1
Share

How to reset the maintenance light on the Fengjun 7?

The method to reset the maintenance reminder light on the Fengjun 7 is as follows: 1. Turn off the ignition switch and stop the engine. Press and hold the right button (reset) on the instrument panel with your left hand; 2. While continuing to hold the right button with your left hand, turn on the ignition switch. Keep holding the "reset" button until the maintenance light enters reset mode, then release the right button (reset button); 3. Within 20 seconds of releasing the right button, press the left "menu button" once to confirm the reset. More related information: The Fengjun 7 is a new-generation internet-connected pickup truck launched by Great Wall Motors, equipped with a "China Core" engine model GW4D20D, paired with a 6-speed manual transmission.
15
1
Share

What is the reason for the sudden mute of the Audi Q5L multimedia system?

If only one speaker has no sound, it may be a problem with the speaker or a fault in the speaker wiring. If all four speakers are not working, first check if the volume is turned on. If the volume is on but there is still no sound, it is necessary to specifically check the internal hardware of the navigation host, or it could be that the sound module is damaged. Additional information: 1. Precautions: If the car audio suddenly has no sound, first check whether the CD player's power is normal, whether the power indicator light is on, and whether the CD player compartment opens and closes normally. If there is no power, check the power source, i.e., the fuse box and wiring. If the car has been modified with audio equipment, check the modified fuse or see if the audio output line has come loose. If it still doesn’t work, consider whether the speaker is faulty. Often, the radio is installed to alleviate the boredom of the driver and passengers during travel. In terms of sound quality, operation, and vibration resistance, it meets high standards, capable of handling the bumps of the car on rough roads, ensuring stable performance and perfect sound quality. Therefore, a voltmeter can be used to test if the speaker is damaged. 2. Function: Car audio is an important way for drivers to combat fatigue during travel, playing a crucial role in safe driving and vehicle safety. Therefore, it should not be neglected or taken lightly.
14
0
Share

What does the small dashboard with an arrow inside the car instrument panel mean?

The small dashboard with an arrow inside the car instrument panel represents the vehicle's cruise control function, also known as CCS. Below is more information about cruise control: 1. Cruise control is also known as a cruise control driving device, speed control system, or autonomous driving system. Its function is to automatically maintain the vehicle's speed without the driver needing to press the accelerator pedal after turning on the cruise control switch, allowing the vehicle to travel at a fixed speed. 2. In the event of a "cruise control" malfunction while driving, you can respond by shifting to neutral, turning off the engine, applying the brakes, or pulling the handbrake. If shifting to neutral is ineffective, the driver can also try turning off the engine to stop the vehicle; for vehicles started with a key, turning off only one gear will not cause the vehicle to lose steering or braking assistance.
3
4
Share

What does ABS in cars mean?

ABS, short for Anti-lock Braking System, functions by automatically controlling the braking force during car braking to prevent wheel lock-up. It keeps the wheels in a state of rolling and sliding (with a slip ratio of around 20%) to ensure maximum adhesion between the wheels and the road surface. The ABS sensor is located on the inner side of the car tire and can be seen when the car is lifted. The ABS system mainly consists of four components: wheel speed sensor, electronic control unit (ECU), hydraulic unit, and ABS warning light. The wheel speed sensor detects the motion state of the wheel and emits a sinusoidal electronic pulse AC signal. This signal is then processed by a modulator, converted into a digital signal, and transmitted to the electronic control unit. The electronic central control unit (ECU) receives input signals from the wheel speed sensor, calculates the wheel speed, vehicle speed, and slip ratio based on these parameters, determines the wheel state according to the slip ratio, and issues control commands to the hydraulic unit. The hydraulic unit adjusts the pressure in the brake lines based on the control commands, with the adjustment process including pressure holding, pressure increase, and pressure decrease. The ABS warning light alerts the driver to any system malfunctions. If the ABS warning light is on, it is recommended not to continue driving. This is because the ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, making it difficult for the driver to slow down or adjust the vehicle's trajectory, posing significant safety risks.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.