What is the disassembly and installation method for the Baojun 510 wiper?

[OAurora]

Baojun 510 wiper disassembly and installation method is: 1. Lift the wiper arm from the windshield and keep it stable in a position perpendicular to the windshield; 2. Press the tab to remove the old wiper blade and separate it from the metal arm; 3. Insert the new wiper blade and rotate it; 4. Secure the hook into place and return the wiper to the windshield. Baojun 510 wiper operation method is: 1. Locate the wiper control lever on the right rear side of the driver's seat; 2. Adjust the front wiper speed by switching between the three upper left positions on the control lever; 3. Activate the rear wiper by selecting the second upper right position on the control lever; 4. Turn off the wiper by moving the right side of the control lever back to the 'off' position.

[VanWalter]

Last time I replaced the wiper blades on my Baojun 510 myself, I first had to lift the wiper arms upright. Remember to place a thick towel on the windshield to prevent the wiper arms from suddenly snapping back and damaging the glass. Locate the square buckle at the connection point, press the small button in the middle of the buckle firmly with your thumb, and with your other hand, gently push the wiper blade toward the front of the car to remove it. When installing the new wiper blade, align it with the U-shaped hook slot, and you'll know it's securely fastened when you hear a crisp 'click' sound. The whole process can be done in about ten minutes, but make sure the new wiper blades are exactly the same length as the old ones—it's best to measure the original size before purchasing. Replacing them before the rainy season is especially important, as aged rubber blades won't clear rainwater effectively, making nighttime driving particularly dangerous.

[LondonAnn]

I'm used to operating immediately after turning off the engine to avoid accidentally touching the wiper switch and hurting my hand. The key to removing the wiper blades on the Baojun 510 lies in that black buckle - press the middle plastic spring piece while pushing the wiper blade body outward. Pay attention to the direction during installation, the side with the brand logo should face outward. After replacement, be sure to spray windshield washer fluid to test the wiping effect and check for any jumping or abnormal noises. Doing it yourself saves about 70-80 yuan compared to going to a repair shop. When buying wiper blades online, choose those with graphite coating - they wipe more smoothly and are more durable. Remember to check the rubber strip for aging every six months, and replace it promptly if the edges crack.

[AmeliaMarie]

Before operation, first activate the wiper maintenance mode: Immediately after turning off the engine, push the wiper lever downward, and the wiper will stop in the vertical position. When removing, pinch the release buttons on both sides of the clip, don't force it. Once I forgot to clean the sand on the wiper arm, and the new wiper started making noise within days. After installation, remember to peel off the protective film on the new wiper blade, otherwise it won't wipe clean at all. Be extra careful when replacing wipers in winter, as the plastic clips become brittle and can easily break. Changing them yourself is really simple, even easier than replacing a light bulb.

[Adam]

Before replacing the wipers, it's best to check the owner's manual as the clip designs of the Baojun 510 may vary by year. Wearing gloves throughout the removal and installation process is safer to prevent sweat from causing rust on the metal arms. I always replace them before the rainy season, and the new rubber blades noticeably wipe more quietly, greatly improving nighttime driving visibility. The spring on the wiper arm is very tight; using your knee against the hood for leverage makes lifting it easier. Don't discard the old wipers carelessly; the rubber parts should be disposed of separately for environmental reasons.

[BethanyLee]

I found that the original wiper blade clips on the Baojun 510 are U-hook type, so it's safest to choose a vehicle-specific model when buying replacements. When removing them, you need to rotate the wiper blade to a 90-degree angle with the wiper arm to ensure the clip's force point is correct. After installation, test the operation at different speed settings, especially checking if it hits the A-pillar during the return stroke. The lifespan of the rubber blade depends on driving conditions; those who frequently drive on highways are advised to inspect it every three months. Replacing it yourself saves time and money, and with practice, it can be done in just five minutes.