What is the difference in fuel consumption between 1.5L and 1.5T?

1 Answers
DelJuliette
07/29/25 5:48pm
1.5L and 1.5T have a difference of about 0.3L per 100 kilometers in fuel consumption. The actual fuel consumption is related to road conditions, driving habits, and other factors. Here are ways to reduce fuel consumption rate: 1. To clarify various measures for reducing fuel consumption rate, one can start from the principle. Reasonably organize the combustion process to improve the cycle indicated efficiency. Improving indicated efficiency not only enhances the power performance of the internal combustion engine but also improves its economic performance. 2. Improving the mechanical efficiency of the internal combustion engine can enhance both its power and economic performance. This mainly relies on reasonably selecting various thermal and structural parameters, adopting structural and process measures to reduce friction losses and the power consumed by driving auxiliary mechanisms such as water pumps and oil pumps, as well as improving the engine's lubrication and cooling.
Was this review help?
1
5
Share
More Forum Discussions

What engine does the Territory use?

The Territory is equipped with a 1.5-liter turbocharged engine. Here are the specific details about the Territory: 1. The Territory is a compact SUV under the Ford brand. 2. The Territory measures 4580mm in length, 1935mm in width, and 1674mm in height, with a wheelbase of 2716mm. 3. The 1.5-liter turbocharged engine delivers a maximum power of 103kW and a peak torque of 225Nm. This engine can output its maximum torque starting from 1500rpm and maintain it up to 4000rpm. 4. This engine features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block.
20
0
Share

What is a Central Locking System in a Car?

Central locking system in a car refers to a control switch located next to the driver's seat that can simultaneously control the locking and unlocking of all vehicle doors. This "central door lock" control device was first installed in cars as early as the 1970s, and after more than two decades, it has become relatively common. The central locking switch is usually installed on the door or the center console. The functions of the central locking system in a car are as follows: 1. Central control. When the driver locks the door next to them, all other doors are simultaneously locked. The driver can use the door lock switch to open all doors at once or open a specific door individually. 2. Speed control. When the vehicle reaches a certain speed, all doors can automatically lock to prevent passengers from accidentally opening the doors by operating the door handles.
19
1
Share

What tires does the Ford New Fiesta use?

Ford New Fiesta uses Bridgestone tires with a tire specification of 195/50R16. More details are as follows: 1. The Ford Fiesta is positioned as a compact car, officially launched in 1976. The first-generation Fiesta was equipped with a 1.0L engine, delivering only 30 kilowatts of power. 2. The Ford New Fiesta is a truly global model within the Ford Group that embodies the OneFord spirit. 3. The exterior design adopts the European dynamic Kinetic Design language, incorporating a large number of complex and dynamic lines and elements, following a thoroughly dynamic route. The entire exterior design is bold and stylish, full of sportiness.
16
5
Share

What is the method for resetting the maintenance light on the Chery Tiggo 8?

Chery Tiggo 8 maintenance light reset steps are as follows: 1. Start the vehicle by pressing the start button once. 2. Check the dashboard for the maintenance reminder. 3. Press the SET button on the steering wheel. 4. Then press the SEL button on the right side of the steering wheel. 5. Next, press the cancel button on the steering wheel. 6. Finally, the maintenance reminder on the dashboard will disappear. Resetting the maintenance light is a necessary operation after car maintenance. This maintenance light serves as a fixed mileage reminder function and has no other connection to the vehicle's operation; it simply reminds the driver that maintenance is required at the specified mileage.
19
4
Share

What Causes Dual-Clutch Transmission to Shudder During Start-Up?

The reasons for dual-clutch transmission shudder during start-up are as follows: 1. Clutch shudder: Let the engine idle, engage a low gear, slowly release the clutch pedal and increase the throttle to start. If the vehicle body shakes at this time, it indicates clutch shudder. 2. Uneven distribution of positive pressure between driven discs: The pressing force of the clutch pressure springs in a frequently engaged clutch is uneven, the adjustment of each release lever is inconsistent, and/or the fingers of the diaphragm spring are not level, leading to asynchronous engagement timing and uneven force distribution on the pressure plate. 3. Weakened damping spring force: The damping force of the clutch torsional damping spring weakens, the pressing force of the clutch pressure spring weakens, or cracks appear in the diaphragm spring, all of which can cause clutch shudder during engagement. The strategy to address this is to replace the springs.
12
0
Share

What car has a 'Tang' logo in the middle?

The 'Tang' badge belongs to BYD's Dynasty series models. Here is more information about it: 1. On January 20, 2015, BYD officially launched the 'Tang' SUV in Shenzhen, offering '5+7 seat' interior layouts and covering three powertrain systems: fuel, dual-mode, and pure electric, catering to diverse usage scenarios. 2. The all-new Tang fuel version is equipped with a 2.0T engine paired with a 6AT transmission, delivering a maximum power of 141 kW and peak torque of 320 N·m, with a transmission efficiency exceeding 93%. The new energy versions include Tang EV and Tang DM. Tang EV is a luxury-tech dual-flagship pure electric SUV featuring an electric four-wheel-drive powertrain.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.