What is the difference between C1D and C1?

What are the differences between the Baojun 510 and 560?

Differences between the Baojun 510 and 560: Body Design: The Baojun 510 is positioned as a compact SUV, featuring a brand-new family-style design with split-type headlights. The upper section consists of slim and sharp LED daytime running lights. The front end of the Baojun 560 continues the Baojun family design, with a chrome grille, headlight contours, and hood character lines resembling those of the Baojun 730. The LED running lights are positioned below the fog lights, and the headlights also include LED position lights. The Baojun 560's exterior mirrors integrate turn signals and come with roof rails. From spy shots, the Baojun 560 does not feature a panoramic sunroof. Powertrain: The Baojun 510 delivers a maximum power of 82 kW and a maximum torque of 147 Nm, paired with a 6-speed manual transmission, achieving a combined fuel consumption of 6.3 L/100 km. In terms of exterior styling, the Baojun 510 adopts split-type front headlights. The side profile features an upward-sweeping waistline design and a floating roof. Depending on the trim level, the Baojun 510 may come equipped with features such as electronic stability control, cruise control, tire pressure monitoring, one-button start, auto start-stop, automatic climate control, and a panoramic sunroof. The Baojun 560 emphasizes its rear light cluster design, incorporating LED light guide position lights, with brake lights, reverse lights, and other lighting elements also likely using LED sources. The spy shot vehicle is equipped with four black rear parking sensors. Additionally, the Baojun 560 includes a shark-fin antenna.

118

Share

What does AST mean on a car?

AST on a car refers to the radio's automatic search and store function for radio stations. When AST is used, it automatically saves the frequencies of stations with signals. You can select stations by pressing the button, and holding down this key will automatically store radio stations. The method to set up a car radio is: 1. After starting the vehicle, swipe the central control screen to the right to find the car radio operation interface; 2. Click the play button to turn on the car radio; 3. Click AST to activate the automatic channel search function; 4. Press the stop button at the finger position to stop the radio search. The method to adjust the volume of the car radio is: Rotate the knob clockwise or counterclockwise to increase or decrease the volume. Press the knob to mute, and press it again to restore the sound.

106

Share

Can Engine Oil Still Be Used After Its Expiration Date?

Engine oil can still be used after its expiration date. The shelf life of engine oil is as follows: 1. Unopened engine oil has a shelf life of 5 years; 2. The remaining engine oil after maintenance has a shelf life of 1 year; 3. Engine oil poured into the engine has a shelf life of 6 months. Engine oil, also known as engine lubricant, serves to lubricate and reduce friction in the engine, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. Engine oil consists of base oil and additives. The base oil is the main component of the lubricant, determining its fundamental properties, while additives compensate for and improve any deficiencies in the base oil's performance. It can be categorized into diesel engine oil and gasoline engine oil.

116

Share

What is the symbol on the car fuel gauge?

The symbol on the car fuel gauge is a fuel pump from a gas station. When the fuel level reaches the one-quarter mark, you should go to the gas station to refuel. The correct steps for refueling a car are: 1. Slow down and drive into the gas station slowly, and drive out at low speed after refueling; 2. Turn off the engine before refueling; 3. After filling up, close the fuel nozzle before starting the car. Precautions when refueling a car include: 1. Do not wait until the yellow warning light comes on to refuel to avoid running too low on gasoline; 2. Choose to refuel in the morning or evening when temperatures are relatively lower; 3. Avoid filling the tank completely when driving in the city to prevent overflow, which could cause spark plug failure and lead to the car stalling after refueling; 4. Do not refuel during thunderstorms to avoid stray currents from the fuel nozzle entering the car's fuel tank, which could pose fire or explosion hazards.

108

Share

What does 'lim' mean on an Audi car?

Here is the relevant introduction about lim: 1. LIM is the speed limit function button. After activating this function, the maximum speed can only reach the set speed, and the speed will not increase even if the accelerator is pressed further. 2. When the vehicle is stationary, pressing this button will default the speed limit to 30 km/h. 3. While driving, pressing this button will set the current speed value as the speed limit trigger point. 4. Press to turn on, and press again to turn off. Here is the relevant introduction about the speed limit function: 1. When the accelerator depth is below 95%, the speed will not exceed the set speed, and the vehicle will alarm when reaching the set speed. 2. Fully pressing the accelerator can exceed the set speed limit, and the speed limit function remains effective after releasing the accelerator. 3. The speed limit function can prevent speeding and is very practical. 4. Cruise control maintains speed without the need to press the accelerator pedal for a long time, allowing the driver to rest. 5. The speed limit function sets the maximum speed of the car, and the accelerator still needs to be pressed.

109

Share

How to reset the maintenance light on Changan Benben?

Methods to reset the maintenance light on Changan Benben: 1. With the engine turned off, press and hold the short-distance counter reset button below the tachometer; 2. Turn the ignition switch to the ON position, release the short-distance counter reset button, and the SERVIC indicator will appear on the display; 3. Pull out the minute button on the clock, turn it to the right, and the mileage will be displayed on the screen; 4. Turn off the engine to reset the reminder message; 5. Turn the ignition switch to the ON position, and the SERVICE indicator will disappear. If the maintenance light cannot be turned off manually, it is necessary to visit a repair facility to use professional diagnostic equipment to reset the maintenance light.

107

Share