···
Log in / Register

What is the difference between 15w40 and 20w50?

1Answers
DeChloe
07/24/2025, 11:12:17 PM

The differences between 15w40 and 20w50 engine oils are: 1. Different viscosity: The viscosity of 15w40 oil ranges between 13.5 to 16.0; while the viscosity of 20w50 oil ranges between 16.5 to 20.0. 2. Different pour points: The pour point of 15w40 oil is around minus twenty-five degrees Celsius; whereas the pour point of 20w50 oil is around minus nineteen degrees Celsius. The functions of engine oil include: 1. Reducing friction and high temperatures; 2. Cooling and temperature reduction; 3. Cleaning and purification; 4. Shock absorption and cushioning; 5. Rust and corrosion prevention. Engine oil, also known as motor lubricant, consists of base oil and additives. The base oil is the main component of lubricating oil, determining its fundamental properties, while additives can compensate for and improve any deficiencies in the base oil's performance.

Was this review help?
119
Share
More Q&A

What to Do When the Kia K4 Key Fob Battery Dies?

When the Kia K4 key fob battery dies, you need to remove the buckle on the back of the car key, then take out the mechanical key to expose the remote key battery. Replace it with a new one, and reassemble the key and buckle. The battery powers the door opening/closing and engine start functions. Without power, the key fob will be unusable, so owners should regularly replace the remote key battery. The Kia K4 is a mid-size sedan from Kia, with dimensions of 4720mm in length, 1815mm in width, 1465mm in height, and a wheelbase of 2770mm.
102
Share

What does the triangle with an exclamation mark in a car mean?

Car triangle with an exclamation mark refers to the conventional faults of the car. The conventional faults of the car include overheating of the dry dual-clutch transmission, intervention or failure of the fuel cut-off system, parking sensor failure, exterior bulb failure, engine oil pressure sensor failure, traction control system warning or failure, etc. As long as one of these faults occurs, the triangle exclamation mark light on the dashboard will light up. In addition to the triangle exclamation mark indicator light, the dashboard also has indicator lights with exclamation marks such as tire pressure indicator light, lighting fault indicator light, steering system fault indicator light, brake system fault light, transmission fault indicator light and windshield wiper fault indicator light. As long as the warning light with an exclamation mark lights up, it means that the corresponding part of the car has a problem and should be checked and repaired in time.
109
Share

What Are the Common Knowledge of Traffic Rules?

Here is an introduction to the common knowledge of traffic rules for driving tests: Common Knowledge 1: Pedestrians should cross the road using pedestrian crossings; stop at red lights, proceed at green lights, and yellow lights indicate a warning. When the yellow light is on, vehicles and pedestrians are not allowed to proceed, except for vehicles that have already crossed the stop line and pedestrians who have entered the crosswalk, who may continue. When the yellow light is flashing, vehicles and pedestrians must proceed under the principle of ensuring safety. Common Knowledge 2: According to road division, generally, motor vehicles, non-motor vehicles, and pedestrians should travel in their respective lanes. Where there is no division of motor vehicle lanes, non-motor vehicle lanes, or pedestrian walkways, motor vehicles should travel in the middle of the road, while non-motor vehicles and pedestrians should travel on both sides of the road. Common Knowledge 3: Dedicated lanes are set up on roads, allowing only specified vehicles to pass. Other vehicles are not permitted to enter these dedicated lanes without authorization. Common Knowledge 4: Both the driver and passengers of a motorcycle must wear safety helmets as required. Common Knowledge 5: Motor vehicles must not carry more passengers than the specified number, and passenger vehicles must not carry goods in violation of regulations.
103
Share

How to Shift Gears Smoothly Without Grinding in FAW J6?

The shifting technique for FAW J6 is to shift gears timely, correctly, smoothly, and quickly. When starting the vehicle, it is generally recommended to use a low gear. Once road conditions permit, promptly shift up to higher gears in sequence. Higher gears are generally more fuel-efficient than lower ones, so it's important to upshift promptly after starting and avoid driving in a gear that's too low for the speed. More details about vehicle gears are as follows: 1. Introduction One: Generally, it is not allowed to forcibly shift into a lower gear when the vehicle is at a high speed. This should only be done in very special circumstances or when the vehicle's brakes suddenly fail and engine braking is necessary. 2. Introduction Two: First gear is used for normal starts or climbing very steep hills, with speeds typically around 10 km/h. Second gear is used for accelerating after starting or for low-speed driving, with speeds typically around 20 km/h. Third gear is used for speeds between 20-40 km/h and is commonly used for city driving. 3. Introduction Three: To engage first gear, move the gear lever to the left and then push forward. For second gear, move the lever to the left and then push down. For third gear, push the lever straight up from the neutral position. For fourth gear, push the lever straight down from the neutral position. For fifth gear, push the lever to the right and then straight up.
116
Share

What materials are needed for a driver's license replacement and how long does it take?

To replace a driver's license, the original and photocopy of the motor vehicle driver's identity document must be provided. Below are some important notes regarding driver's license replacement: Do not drive during the interim period: If replacing a damaged license, the driver must not operate a motor vehicle with the original license during the interim period before receiving the new one, as this will be considered driving without a license. The original license becomes invalid: After obtaining a replacement license, the original motor vehicle driver's license becomes void. Other documents: Besides loss or damage, another reason for replacement could be the expiration of the license. In this case, the original and photocopy of the physical condition certificate must also be submitted.
108
Share

Which Lane is the Deceleration Lane on the Highway?

On highways, there are generally three lanes: the left lane is the overtaking lane, the middle lane is the travel lane, and the right lane is the deceleration lane. In the case of four lanes, the left lane is the overtaking lane, the middle two lanes are travel lanes, and the fourth lane is the deceleration lane (or emergency stopping lane). Additional information: Article 78 of the Implementation Regulations of the Road Traffic Safety Law stipulates: 1. Regulation 1: Highways shall indicate the speed limits for each lane, with the maximum speed not exceeding 120 km/h and the minimum speed not less than 60 km/h. 2. Regulation 2: On highways, the maximum speed for small passenger vehicles shall not exceed 120 km/h, for other motor vehicles not exceeding 100 km/h, and for motorcycles not exceeding 80 km/h. 3. Regulation 3: For roads with two lanes in the same direction, the minimum speed for the left lane is 100 km/h; for roads with three or more lanes in the same direction, the minimum speed for the leftmost lane is 110 km/h, and for the middle lane, it is 90 km/h. 4. Regulation 4: If the speed limit indicated by road signs is inconsistent with the above lane speed regulations, drivers shall follow the speed limit indicated by the road signs.
111
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.