What is the body weight of the Volkswagen Lavida?

1 Answers
ZoeyLynn
07/29/25 7:41pm
The body weight of the Volkswagen Lavida is 1.2 tons. The Lavida is produced by Shanghai Volkswagen, with dimensions of 4600mm in length, 1700mm in width, and 1500mm in height, and a wheelbase of 2610mm. In terms of color scheme, the Lavida inherits the traditional two-tone interior design of Volkswagen models in China, featuring a darker upper section and a lighter lower section. However, between these two sections, it incorporates a wood-grain trim that blends with the center console, inspired by the design style of Japanese mid-size cars. Exterior-wise, the front fascia of the Lavida differs significantly from previous Volkswagen A-segment models, particularly with its unique teardrop-shaped headlights. The traditional Volkswagen grille and U-shaped front design are also prominently featured and carried forward in the Lavida.
Was this review help?
2
1
Share
More Forum Discussions

Where is the BMW anti-theft wheel nut socket located?

BMW anti-theft wheel nut socket is located in the tool box under the trunk lid. Four anti-theft bolts replace one of the wheel bolts respectively. By using the key socket with a regular wrench to tighten them, it can effectively prevent wheel theft. Taking the BMW 5 Series 2021 Facelift 525Li Luxury Package as an example, this vehicle is manufactured by Brilliance BMW, classified as a mid-to-large size car with gasoline power, featuring a maximum power of 135kW and maximum torque of 290Nm. The dimensions of BMW 5 Series 2021 Facelift 525Li Luxury Package are 5106mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3105mm. It's a 4-door 5-seater sedan with an 8-speed automatic transmission and rear-wheel drive configuration.
17
3
Share

Is Private Cars Scrapped After 15 Years?

Private cars are not mandatorily scrapped after 15 years. The state has abolished the original 15-year mandatory scrapping period and replaced it with a mandatory scrapping at 600,000 kilometers. According to the new regulations: vehicles must undergo annual inspections. If the inspection is overdue and caught by traffic police, the vehicle will be penalized with points and fines. If a vehicle fails to undergo annual inspections for three consecutive years, it will be mandatorily scrapped. The standards for vehicle scrapping: 1. Reaching the prescribed service life; 2. Failing to meet the national standards for in-use vehicle safety technical requirements; 3. Still failing to meet the national standards for in-use vehicle requirements regarding atmospheric pollutant emissions or noise; 4. Failing to obtain the motor vehicle inspection compliance mark within three inspection cycles.
15
2
Share

What is the introduction of each button on the Mazda3?

Mazda3's introduction of each button refers to the explanation of the instrument panel, center console, etc. The following is a related introduction about the car instrument panel: 1. Introduction to the car instrument panel: With the advancement of electronic technology and the emergence of new sensors and new electronic display components, car electronic instrument panels have been rapidly adopted. Common ones include fuel indicator light, washer fluid indicator light, electronic throttle indicator light, front and rear fog light indicator light, and warning light. 2. The function of the car instrument panel: The function of the car instrument panel display is a device that reflects the working conditions of various systems of the vehicle. It can monitor the car status at any time and provide the driver with the required car operating parameter information. It is an important interface for information exchange between the driver and the car.
20
2
Share

Why Does the Brake Pad Smell Burnt During Continuous Downhill Driving?

Here is the relevant introduction to why the brake pad smells burnt during continuous downhill driving: 1. High Resistance: Because the brake pad is subjected to greater resistance than usual during downhill driving, it is prone to damage, carbonization, and significant wear. When the brake pad ages, it can easily wear out the carbon lining completely, leaving only metal-to-metal friction. It's important to note that metal-to-metal friction is minimal, which can lead to slipping and brake failure. 2. Vaporization Phenomenon: Additionally, high temperatures can cause the brake fluid to vaporize, which is intended to expel air from the brake lines. During brake adjustment, bleeding the brake lines to remove air is also a crucial step. Another reason is that prolonged downhill braking causes the brake pad temperature to rise rapidly, leading to high-temperature deformation and reduced contact area, which can also result in brake failure.
15
5
Share

Is it serious if fully synthetic oil has run for 12,000 kilometers?

Fully synthetic oil that has run for 12,000 kilometers needs to be replaced promptly. Generally speaking, the service life of fully synthetic oil is around 10,000 kilometers. If the vehicle is in good operating condition, running it for 12,000 kilometers is acceptable, but it is recommended that the owner replace the oil in a timely manner. Below is relevant information about automotive engine oil: 1. Types: There are three types of engine oil used in vehicles, namely mineral oil, semi-synthetic oil, and fully synthetic oil. Compared to mineral oil and semi-synthetic oil, fully synthetic oil has a more stable molecular structure, uniform molecular size, and offers excellent lubrication and oxidation resistance. 2. Functions: The primary role of engine oil is lubrication, reducing the friction coefficient between internal engine components during operation. It also repairs minor damage caused by friction and carries away metal particles generated by the friction between components.
4
5
Share

What are the impacts of a damaged car crash beam on the vehicle?

The primary function of a crash beam is to provide a certain level of protection for the vehicle during low-speed collisions, acting as a buffer to reduce the extent of vehicle damage. In other words, the main role of the crash beam is to prevent vehicle damage, and it has limited effect on improving the safety of occupants inside the car. A damaged car crash beam should be replaced promptly. Below is an introduction to car crash beams: 1. Front bumper crash beam: During low-speed collisions such as rear-end accidents on urban roads, the front bumper crash beam plays a role in protecting components like the fenders, radiator, hood, and lights. 2. Rear bumper crash beam: The rear bumper crash beam helps reduce damage to areas such as the trunk, tailgate, and rear light assemblies.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.