···
Log in / Register

What is the body weight of the Tesla Model 3?

5 Answers
LaCooper
07/24/25 9:43am

Tesla Model 3 currently has two models on sale, with a curb weight of 1761kg. The curb weight of a car, commonly referred to as the 'empty weight'. The so-called curb weight of a car refers to the weight of the car when it is fully equipped according to the factory technical conditions (such as spare tires, tools, etc.), and all fluids are filled. It is closely related to the design level, manufacturing level, and industrialization level of the car. Under the same model conditions, the better the design method, the superior the production level, and the higher the industrialization level, the lower the curb weight will be. The curb weight of a car is also an important parameter affecting fuel consumption. Because the fuel consumption of a vehicle is directly proportional to its curb weight, meaning the heavier the car, the more fuel it consumes. The Tesla Model 3 has dimensions of 469418501443mm and a wheelbase of 2875mm. It is equipped with a permanent magnet/synchronous motor, with a total motor power of 194kW and a total motor torque of 340N.m, matched with a fixed gear ratio transmission.

Was this review help?
13
1
Share
VanValeria
08/11/25 1:48am

I'm quite familiar with the curb weight of the Tesla Model 3. The difference between versions isn't significant, generally falling within the range of 1,600 to 1,900 kilograms. For example, the Standard Range version weighs about 1,610 kg, while the Long Range version is closer to 1,850 kg, primarily due to its larger battery. As someone who frequently follows electric vehicles, I believe weight has a considerable impact. Its low center of gravity and stable chassis prevent drifting during high-speed cornering, but the added weight increases range pressure, requiring more frequent charging. The design incorporates aluminum alloys to reduce weight, but the battery accounts for over one-third of the total mass, making it heavier than traditional gasoline-powered cars—for instance, a similarly sized mid-size gasoline sedan might weigh only 1,500 kg. Fortunately, the Model 3 optimizes energy efficiency, so the weight doesn't hinder performance too much.

Was this review help?
20
1
Share
Expand All
JeremiahFitz
09/25/25 3:04am

I've conducted automotive testing, and the Tesla Model 3 typically weighs around 1,700 kilograms with some variation. The vehicle's lightweight design utilizes high-strength steel and aluminum, with the key improvement in stability coming from the bottom-mounted battery pack. The relatively higher weight may affect acceleration feel, but the motor efficiency compensates for this; the driving experience feels solid with minimal risk of rollover. Compared to other electric vehicles like the BYD Han, which weighs approximately 1,900 kilograms, the Model 3 strikes a good balance. The weight reduction effects from optimized electronic control systems are noticeable, and the weight distribution is well managed.

Was this review help?
18
0
Share
Expand All
MacBrandon
11/08/25 5:10am

I've driven the Model 3 a few times and recall its weight being around 1.7 tons, which isn't too extreme. As an average car owner, I'm more concerned about its daily impact; the heavier body provides a smoother, less bumpy ride, but makes it feel more cumbersome when parking or turning. The battery accounts for a significant portion of the weight, leading to quicker energy depletion when driving long distances on a full charge. Considering weight is useful for evaluating safety and range when choosing a car, while lighter versions offer more agile handling.

Was this review help?
19
0
Share
Expand All
StLorenzo
12/29/25 6:57am

When working on a Model 3, I noticed its average weight is around 1,700 kg, which benefits structural safety. The chassis is reinforced by the battery, making it sturdier and more impact-resistant. I recommend owners pay attention to suspension and brake maintenance, as the extra weight accelerates wear and tear, increasing failure risks. Compared to fuel vehicles, the increased weight of EVs results in slightly longer braking distances, so drivers should allow more space. The advantage of higher weight is better stability at high speeds, but daily city driving in traffic jams requires adjusting driving habits.

Was this review help?
11
3
Share
Expand All
More Forum Discussions

What Oil Should Be Changed During the First Car Maintenance?

For the first car maintenance, it is necessary to change to standard original equipment manufacturer (OEM) oil or fully synthetic oil, which can reduce internal engine wear and extend the engine's service life. The time and specific items for the first car maintenance are as follows: Time for the first car maintenance: The first maintenance for a new car is at 5,000 kilometers or six months, whichever comes first. The first maintenance is free, and you can follow the mileage and time specified in the maintenance manual. Specific items for the first car maintenance: Change the engine oil and oil filter, clean the air filter; check whether the levels of various fluids are normal; inspect the generator belt and wiper blades for any damage; check whether the tire pressure is normal and look for signs of uneven wear, bulges, or damage on the tires.
12
2
Share

Why does the Mercedes-Benz make a loud noise when starting?

Mercedes-Benz makes a loud noise during cold starts because the arrangement of the exhaust manifold places the catalytic converter too far back. The catalytic converter must reach a certain temperature to effectively filter exhaust gases. Therefore, to quickly heat up the catalytic converter, the exhaust valve closure is intentionally delayed during cold starts, causing the air-fuel mixture to enter the exhaust manifold and combust, resulting in the loud noise during cold starts. Here is some related information: History of Mercedes-Benz: Mercedes-Benz was founded in 1926 by Karl Benz and Gottlieb Daimler. Its predecessors were the Benz & Cie. and Daimler-Motoren-Gesellschaft, established in 1886. The two companies merged in 1926 to form Daimler-Benz AG. Mercedes-Benz Logo: The Mercedes-Benz logo is a three-pointed star, symbolizing the ambition to dominate land, sea, and air. This emblem was created after the merger of Daimler and Benz. The original Daimler logo featured a three-pointed star, while the Benz logo had the word "BENZ" inside a double circle. After the merger, the Daimler-Benz logo became a three-pointed star inside a single circle. Making the three-pointed star shine globally has been Mercedes-Benz's dream for over a century and remains its relentless pursuit.
8
3
Share

What is the reason for the tire pressure warning in the Mercedes GLB?

Mercedes GLB displays a tire pressure warning because the pressure in one of the tires is either too low or too high, but has not yet reached the warning threshold. It is necessary to check the tire pressure. Tire Pressure Monitoring: Tire pressure monitoring involves real-time automatic monitoring of tire pressure during vehicle operation, alerting the driver in case of tire leakage or low pressure to ensure driving safety. Common tire pressure monitoring methods include: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the pressure data for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to the other wheels. By comparing the differences in rotation speeds between the tires, the system monitors tire pressure. Indirect tire pressure warning systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): It combines the advantages of both systems mentioned above. Direct sensors are installed in two diagonally opposite tires, and a four-wheel indirect system is also employed. Compared to a fully direct system, this hybrid system reduces costs and overcomes the limitation of indirect systems, which cannot detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires as effectively as a direct system.
13
5
Share

Is it necessary to ride the motorcycle for the transfer of ownership?

It is required to ride the motorcycle for the transfer of ownership. Additional information is as follows: Vehicle inspection. Drive the motorcycle to the inspection site for external inspection, tracing the vehicle identification number, removing the license plate, and taking photos. Obtain the vehicle photo and attach it to the inspection record form, then proceed to the transfer hall for filing procedures. License plate selection. After obtaining a number from the number dispenser, queue up with the relevant materials to pay the transfer fees. Transfer and relocation: Required materials include the Motor Vehicle Registration, Transfer, and Cancellation Form/Application for Transfer, inspection record form, original motor vehicle property registration certificate, original driving license, original owner's ID card, original license plate number, vehicle photo, and transfer invoice from the trading market. Documents required for motorcycle transfer: Original motorcycle driving license. Owner's ID card and a copy. Transferee's ID card and a copy. Uniform invoice for second-hand vehicle sales transfer registration. Motor vehicle registration certificate. Motorcycle transfer process: Both parties involved in the motorcycle transfer should go to the Vehicle Management Office to collect the "Motor Vehicle Inspection Record Form" and the "Motor Vehicle Registration, Transfer, and Cancellation/Transfer Application Form". Ride the motorcycle to the inspection site for external inspection, tracing the vehicle identification number, removing the license plate, and taking photos. Obtain the vehicle photo and attach it to the "Motor Vehicle Inspection Record Form", then proceed to the transfer hall for entry procedures. After queuing up with the relevant materials for entry, pay the transfer fees (15 yuan). At the designated counter, a new driving license will be printed according to the serial number, and the old driving license will be collected. Update the information on the motor vehicle registration certificate.
14
4
Share

Why Should Vehicles on the Main Road Yield to Those on the Auxiliary Road?

Due to high traffic volume, the main road serves as the trunk line while the auxiliary road functions as the branch line. Vehicles on the branch line should yield to those on the trunk line. Generally, main roads have more lanes and higher speed limits, so vehicles on auxiliary roads must yield to those on the main road. Below are relevant details: 1. Auxiliary roads in urban expressways should be located on one or both sides of the main road. For elevated roads, auxiliary roads should be set at ground level beneath the elevated structure. In urban areas, auxiliary roads should be continuously arranged, while in suburban expressways, they can be continuous or intermittent. 2. Auxiliary roads on both sides of the main road should adopt one-way traffic, whereas those on a single side may allow two-way traffic. 3. Elevated roads and ground-level roads should be connected via on-ramps and off-ramps.
19
5
Share

What Causes a Car to Be Very Noisy?

There are several reasons why a car may be very noisy, including poor fuel quality, knocking or detonation phenomena, and structural noise from the car. The specific reasons are as follows: Poor Fuel Quality: If the fuel quality is poor, it can cause issues with the combustion process inside the engine. This leads to severe engine vibrations and increased noise. Additionally, it can result in more carbon buildup and higher fuel consumption. Therefore, it is advisable to use high-quality fuel for your car. Knocking or Detonation Phenomena: This usually occurs when the remaining combustible air-fuel mixture ignites spontaneously after the spark plug fires. The flame from the spark plug and the flame formed at the end propagate in opposite directions at an impact speed, producing a sharp and harsh knocking sound, which makes the car noisier. Structural Noise from the Car: Structural noise mainly comes from vibration transmission and the noise generated by metal components vibrating under stress. This is relatively normal and does not indicate a fault in the car.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.