What is the battery model of BYD Surui?

2 Answers
SanNoah
09/07/25 5:53am
The battery model of BYD Surui is Varta 80D26. Battery Introduction: Car battery, also known as storage battery, is a type of battery that works by converting chemical energy into electrical energy. Typically, the battery referred to by people is a lead-acid battery. That is, a battery mainly made of lead and its oxides, with sulfuric acid solution as the electrolyte. Battery Working Principle: It uses lead plates filled with spongy lead as the negative electrode, lead plates filled with lead dioxide as the positive electrode, and a 22% to 28% dilute sulfuric acid solution as the electrolyte. During charging, electrical energy is converted into chemical energy, and during discharging, chemical energy is converted back into electrical energy.
Was this review help?
19
5
Share
DeFelix
09/19/25 5:09am
The battery model of my BYD Surui is a 12V 60Ah Q-85 type, which came as the original equipment when the car was new almost four years ago. Last winter, I experienced difficulty starting the car, and after checking the manual, I confirmed this was the correct specification. I later replaced it with a new one at the service station. When changing the battery, it's essential to match the size and voltage; otherwise, it might not fit securely or could affect other components. I usually check if the battery terminals are loose after parking and use a simple voltmeter to test it monthly, maintaining around 12.5V. It's advisable to replace the battery every two years or so to avoid being stranded. In winter, when temperatures drop, the battery's capacity decreases rapidly, making preemptive maintenance crucial. Opt for reputable brands like Varta or OEM parts to ensure safety and reliability.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

How to Restart After Stalling a Manual Transmission Car?

After stalling a manual transmission car, quickly pull up the handbrake, shift to neutral, and turn the key to the off position. Press the clutch with your left foot (some cars require the clutch to be pressed to start the engine), and place your right foot on the brake pedal (it cannot be pressed down at this time). Use the key to start the engine, press the brake, release the handbrake, shift into gear, release the clutch, and start moving.
12
4
Share

What is the safest method for running battery cables into the cabin?

Route the cables from the firewall near the co-pilot's air filter to the engine bay, cover with heat shrink tubing and corrugated conduit, connect to a circuit breaker and fuse holder, then to the positive terminal. Inside the cabin, connect to a relay, control the relay switch, run the cables along the plastic housing of the co-pilot's footwell to the co-pilot's seat, and connect the wiring to the co-pilot's seat. Connect the positive and negative 16-gauge power cables to a two-in-one-out splitter, then connect the original power cables from the thick padding of the center armrest to the splitter to complete the wiring.
8
1
Share

How to Solve Abnormal Speed Signal in Auman Trucks?

You can inspect the vehicle speed sensor and its wiring harness. The speed sensor is usually installed on the transmission housing. Check for issues such as loose or corroded connectors, broken wires, etc. Perform repairs or replacements. You can also visit an auto repair shop to have a technician resolve the issue.
14
2
Share

How to Handle Small Car Paint Scratches?

After noticing the scratched area on the car paint, observe whether it is located on the front bumper, rear bumper, or other parts of the vehicle. Generally, the front bumper, rear bumper, and fuel tank cover of a car are made of plastic, and the paint layer is relatively thin. If the scratch is minor and you don't want to go for professional repair, you can purchase a touch-up paint pen to handle it. However, if the scratch is on metallic or pearl paint, it is necessary to go to a 4S shop for a spray paint treatment. Typically, 4S shops perform spray painting on the entire panel.
9
1
Share

What transmission does the Touran use?

The Touran is equipped with a 7-speed dual-clutch transmission. This model series uses a 1.4-liter turbocharged engine across all variants, and the dual-clutch transmission is particularly well-suited for pairing with small-displacement turbocharged engines. The dual-clutch transmission is currently a highly popular type of transmission, developed based on manual transmissions. Its structure is quite similar to that of a manual transmission, with the main difference being that the dual-clutch transmission has one additional clutch and an extra set of gear-shifting control mechanisms. In a dual-clutch transmission, one clutch controls the even-numbered gears, while the other clutch manages the odd-numbered gears. This type of transmission connects to the engine via clutch plates, resulting in relatively high transmission efficiency.
5
5
Share

How to Remove the Passenger Side Glove Box of Baojun 730?

Removing the passenger side glove box of the Baojun 730 is very simple. During the removal process, you need to apply force to both sides of the glove box and then pull it outward directly to detach it. The Baojun 730 is a family MPV product under SAIC-GM-Wuling Baojun, with body dimensions of 4780mm in length, 1820mm in width, and 1755mm in height. The Baojun 730 is an MPV model equipped with two engines: one is a 1.5-liter naturally aspirated engine, and the other is a 1.5-liter turbocharged engine. The front suspension of the Baojun 730 is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.