What is the battery model for the Trumpchi GS4 key?

1 Answers
JaxonRose
07/29/25 10:30pm
The battery model for the Trumpchi GS4 key is the Panasonic CR2025 3V lithium button battery. When the smart key's battery is low, the owner needs to replace it promptly. Typically, the battery life of a smart key is 2 to 3 years, and the most commonly used type is the button battery. Owners can purchase and replace the battery themselves or have it replaced at a 4S shop. The Trumpchi GS4 is an SUV model from Trumpchi, equipped with 1.3T and 1.5T turbocharged engines, paired with a 6-speed automatic transmission, a 7-speed dual-clutch transmission, or a manual transmission. The maximum power outputs of the 1.3T and 1.5T engines are 101kW and 145kW, respectively. The vehicle's dimensions are 4510mm in length, 1850mm in width, and 1677mm in height, with a wheelbase of 2650mm.
Was this review help?
4
2
Share
More Forum Discussions

What Causes Motorcycle Oil Burning?

Motorcycle oil burning can be attributed to the following reasons: 1. The oil ring of the piston ring has insufficient elasticity or excessive light leakage, leading to oil burning, which is an issue with the piston ring itself; 2. Excessive clearance between the valve stem and valve guide, or poor sealing by the valve oil seal; 3. Poor cylinder dimensions, excessive ovality, or surface scratches and grooves, preventing the oil ring from scraping off excess oil on the cylinder wall, causing oil to enter the combustion chamber and participate in combustion. Oil burning refers to the situation where engine oil enters the combustion chamber of the engine and burns along with the air-fuel mixture. This phenomenon can lead to rapid damage of the oxygen sensor, increased carbon deposits in the combustion chamber, unstable idling, lack of acceleration power, increased fuel consumption, and excessive exhaust emissions. In severe cases, insufficient engine lubrication can cause irreparable damage or even complete engine failure.
9
2
Share

What is the fuel consumption of the Bentley Bentayga?

The fuel consumption of the Bentley Bentayga is 12.0L/100KM. The currently available Bentley Bentayga models include the 2022 4.0T V8 and the 2022 4.0T V8 S. In the same class, the Mansory Range Rover 2020 3.0T Black Carbon has a combined fuel consumption of 8.8L/100KM. Factors affecting vehicle fuel consumption: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before traffic lights, increases fuel consumption. Vehicle characteristics: Cars with larger displacement generally consume more fuel than those with smaller displacement because larger displacement usually means higher power output, requiring more gasoline for combustion. Vehicles with greater weight also tend to have higher fuel consumption because greater weight demands more driving torque.
5
2
Share

Why is NIO associated with JAC Motors?

This is because all of NIO's vehicle models are produced by JAC Motors under contract manufacturing. Contract Manufacturing Model: In December 2018, the Ministry of Industry and Information Technology (MIIT) officially recognized the contract manufacturing model at the policy level in the 'Administrative Measures for the Access of Road Motor Vehicle Manufacturers and Products.' However, it also imposed certain requirements on companies opting for contract manufacturing. For instance, new automakers without production qualifications must first manufacture 30,000 vehicles through contract production before they can apply for qualifications and build their own factories. Therefore, NIO, lacking automotive production qualifications, had to choose a contract manufacturer to fulfill the 30,000-unit production requirement before proceeding with subsequent operations. NIO's Technology: Apart from the production qualifications provided by JAC, most of the technology originates from NIO itself. NIO established its China headquarters in Hefei, setting up research and development, sales, and production bases to create an operational system centered in Hefei. The manufacturing processes also differ significantly from JAC's production standards.
8
5
Share

What does the ESC malfunction warning mean?

When a car displays an ESC system malfunction warning, it means there is a fault in the Electronic Stability Control system, and the vehicle's electronic stability control is not functioning. This fault can be triggered by software system alarms, or it may be caused by sensor failures or short circuits in the wiring. Diagnosing the issue can be complex, so it's important to visit a 4S dealership promptly for inspection and repair. The role of the ESC system: When the ESC system is activated to correct vehicle stability, it reduces the speed, so pay special attention to road conditions. The ESC system is only a supplementary safety feature for the vehicle. If the car's instability exceeds physical limits, it cannot be controlled. Do not rely solely on the system—always drive safely. When the ESC is active, you may hear some noise from the brake pedal or feel slight vibrations in the corresponding systems. These are caused by pressure changes within the system. Overview of the ESC system: ESC is an Electronic Stability Control system and a supplementary safety system that helps prevent dangerous situations. During sharp turns or lane changes when the vehicle becomes highly unstable, it compensates for stability by applying the wheel brakes or controlling engine torque.
18
3
Share

Are Large Vehicle Tires Tubeless?

Large vehicle tires are not necessarily all tubeless; most use steel-belted tires. The specific reasons are as follows: Tubeless tires have poor load-bearing capacity. Large trucks, with cargo and their own weight, typically weigh at least 20 tons, which tubeless tires cannot support. Steel-belted tires, on the other hand, can handle varying loads without issues and have a longer lifespan. Steel-belted tires feature a fine steel wire mesh within the tire's rubber layers, along with an inner rubber tube, enhancing the tire's load-bearing capacity. Methods to identify whether a large vehicle uses tubeless tires: Method 1: Valve. A tubeless tire has a rubber seal underneath for sealing, whereas a regular tire has a screw. Method 2: Inflation. A tubeless tire consists of only one outer layer. When inflated, the inner ring tightly expands onto the rim, defining a tubeless tire. Since tubeless tires lack an inner tube, the air intake is on the rim, allowing direct inflation through the rim. Method 3: Lettering. The sidewall of a tubeless tire will be marked with "TUBELESS" or "TL."
11
5
Share

What Causes Cracks on the Side of Tires?

Tire sidewall cracks can be caused by: 1. Natural aging—prolonged exposure to sunlight and weather conditions leads to rubber degradation, resulting in cracks over time; 2. Impact damage—frequent driving on rough or gravel roads may cause minor impacts. While slight damage is generally safe, severe impacts require immediate tire replacement. As a critical automotive component, tires directly contact the road surface and work with the suspension system to absorb shocks, ensuring ride comfort and smooth driving performance.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.