···
Log in / Register

How to Change the Phone Number on a Driver's License?

6Answers
LaIsabel
09/08/2025, 02:16:36 AM

First, open and log in to the Traffic Management 12123 app on your phone's home screen. On the main interface of Traffic Management 12123, click on the "Service Center" in the bottom right corner. On the Service Center interface, click on "Information Appeal" in the top right corner. On the User Information Appeal interface, enter the appeal reason, ID number, name, and phone number, then click "Next". On the Appeal Reason interface, click to select the reason why the original phone number cannot be used. Proceed to the next step for facial recognition, align your face to confirm identity.

Was this review help?
102
Share
MacDante
09/20/2025, 12:49:52 AM

I recently went through the process of changing my driver's license phone number and would like to share my experience. First, make sure your new phone number is activated and in use. Then, download the Traffic Management 12123 APP and log in. After completing real-name authentication with your ID card, go to the 'My' section on the homepage to access your personal center. Select 'Driver's License,' find the 'Contact Information Change' option, enter your new phone number, take and upload a photo of your ID card, and submit for review. The system typically sends an SMS notification of the processing result within 24 hours, and once successful, the update is complete. It's advisable to regularly check that your phone number is active to avoid missing violation notices or emergency contacts. If you encounter issues with the APP, you can always visit the vehicle management office counter with your driver's license and ID card to fill out a form for processing—it's hassle-free but not time-saving.

Was this review help?
7
Share
Expand All
LeKira
11/03/2025, 12:13:07 AM

Changing the phone number on your driver's license is quite simple, don't worry too much. I prefer using the mobile app for this - just open the Traffic Management 12123 app, log in to your account, go to the driver's license page and click 'Modify Contact Information', then enter your new number and submit. The app interface is clear with few steps, and you'll get confirmation within minutes after submission. If the app doesn't work well, the alternative is visiting the vehicle management office: bring your ID card and original driver's license, find the service window to fill out an application form, and sign to confirm the new number. Try to go on weekdays earlier to avoid queues. Keeping information accurate is crucial - failing to update might cause you to miss ticket reminders and affect driving safety.

Was this review help?
5
Share
Expand All
StAngela
12/17/2025, 12:13:10 AM

When I needed to change my driver's license phone number, the Traffic Management 12123 APP was a great help. After logging into the APP, I found the driver's license management module, clicked on contact information update, entered the new number, took a photo of my ID proof, and submitted it. The process was simple and time-saving. If you're not familiar with mobile operations, you can also bring your documents to the DMV and fill out a form to get it done. Updating your number promptly helps avoid notification delays.

Was this review help?
19
Share
Expand All
JohnRose
02/06/2026, 01:02:13 AM

To update the phone number on a driver's license for a family member, I tried going directly to the DMV. Bring your ID card and driver's license, take a number at the service hall, inform the staff about changing the contact information, and fill out a simple application form. Make sure the new phone number is functional. The APP method is faster but requires downloading and logging in, which can be challenging for elderly family members, so it's advisable for the younger generation to assist. Updating information prevents missing important notifications and ensures safe driving.

Was this review help?
11
Share
Expand All
AdelynLynn
05/01/2026, 04:45:35 PM

I find the APP most practical for changing the driver's license phone number. Log in to 12123, go to the driver's license section, click on modify phone number, fill in the new number, submit and wait for review. The system will confirm success via SMS and update it. The APP is convenient and available 24/7, saving you from offline trips. If you're not comfortable with it, you can personally go to the vehicle management office with your license and fill out a form to process it. Choosing a less crowded time period is more efficient. Make sure to verify the new number promptly, as delays may result in missing violation information, leading to additional fee issues.

Was this review help?
10
Share
Expand All
More Q&A

What does the loss of anti-theft device activation fuel signal mean?

Loss of anti-theft device activation fuel signal means the vehicle control cannot operate the fuel relay. Anti-theft system fuel activation circuit: The vehicle anti-theft VTD system is integrated into the Body Control Module (BCM). In this situation, the PCM will prohibit fuel supply and terminate the starter until a valid VTD password is detected. Conditions for running DTC: The anti-theft system has allowed fuel supply. Conditions for setting DTC: The PCM has detected a loss of healthy serial data message status in the VTD system. Intermittent faults may occur due to poor contact, worn insulation on the wiring harness, or broken wires inside the insulation. Solution: Check the remote control, check the signal receiver, check whether the control relay signal is output, and verify if the gear signal is correct.
114
Share

Why can't the sunroof of the Qashqai be opened?

The reasons why the sunroof of the Qashqai cannot be opened are: 1. The sunroof slide rail is stuck; 2. The electric actuator is damaged. The car sunroof is installed on the roof, which can effectively circulate the air inside the car, increase the intake of fresh air, and at the same time, the car sunroof can also broaden the field of vision and meet the shooting needs of mobile photography. The Qashqai is a compact SUV under Nissan, equipped with a 2.0-liter naturally aspirated engine with the engine code MR20, delivering 154 horsepower and a maximum torque of 204 Nm. The maximum power output is achieved at 6000 rpm, and the maximum torque is achieved at 4400 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block, paired with a 7-speed CVT transmission.
112
Share

What Audio System Does Bentley Equip?

Bentley selects the top-tier British audio brand Naim, which specially designs and manufactures audio systems for Bentley vehicles. Founders of Naim: Julian-Vereker and Paul-Stephenson established the Naim brand in the UK. Naim not only produces audio systems but also has its own music label, demonstrating profound musical expertise. Power of Naim Audio Systems: The Naim-for-Bentley audio system equipped in the Bentley Mulsanne delivers a power output of 2200 watts, making it the most powerful car audio system currently available. It is complemented by 20 speakers, creating a concert hall-like audio experience.
113
Share

Do I Need to Change Transmission Fluid at 40,000 Kilometers?

Transmission fluid does not need to be changed at 40,000 kilometers. Signs that indicate the need for transmission fluid replacement include: vehicle shaking, gear shifting hesitation; transmission overheating warning on the dashboard; engine stalling; and unusual noises. Transmission fluid replacement intervals: Manual transmission: Manual transmission fluid is generally recommended to be replaced every three years or approximately 100,000 kilometers; Automatic transmission: Automatic transmission fluid is generally recommended to be replaced every two years or approximately 40,000 kilometers; Continuously variable transmission (CVT): CVT fluid is generally recommended to be replaced every two years or approximately 60,000 kilometers. Methods for changing transmission fluid: Loosen the drain plug at the bottom of the transmission to drain the old fluid before refilling; Remove the transmission oil pan directly to drain and refill the fluid: This method is more thorough than the previous one, as it removes impurities from the bottom of the oil pan; Use a circulation machine to replace automatic transmission fluid: Dynamic fluid replacement with an intelligent circulation machine can filter and clean sludge and impurities inside the automatic transmission.
101
Share

Where is the Bentley Flying Spur charcoal canister located?

Bentley Flying Spur charcoal canister is located between the car engine and the fuel tank. Function of the charcoal canister: The function of the charcoal canister is to deal with fuel vapor generated by the car fuel tank at normal temperature. The fuel evaporation emission system introduces the vapor into combustion and prevents it from evaporating into the atmosphere, thereby reducing air pollution. The activated charcoal canister storage device plays a crucial role in this process. Definition of the charcoal canister: The charcoal canister is a component of the fuel vapor emission system, also known as EVAP. Since fuel is a highly volatile liquid, the activated charcoal canister is used to prevent volatile fuel vapors from being emitted into the atmosphere and polluting the environment. The interior of the canister is filled with activated carbon, and fuel vapors evaporated from the fuel tank are directed into the canister for storage.
101
Share

How to Check the Water Temperature of Volkswagen Santana?

Volkswagen Santana does not have a water temperature gauge. The water temperature warning light is displayed on the dashboard. If the water temperature indicator light on the car dashboard is on, it usually indicates a problem with the engine cooling system or a lack of coolant, which can cause the engine to overheat and lead to engine seizure or cylinder explosion (engine boiling). If a water temperature warning appears at low speeds, immediately pull over, turn off the engine, and open the engine hood to facilitate heat dissipation, then call for assistance. If a water temperature warning appears while driving at high speeds, pull over safely, do not turn off the engine immediately, but let it idle for two to three minutes, open the engine hood, and then call for assistance.
104
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.