What is the actual fuel consumption of the Tharu 280?

1 Answers
VanSerenity
09/03/25 8:12am
The actual fuel consumption of the Tharu 280 is 7.8L/100km. Impact of speed on fuel consumption: For a new car after leaving the factory, although it has undergone a break-in period, the surface of the components is still relatively rough. During the break-in period, it is essential to control the driving speed and avoid excessively high speeds. The speed is best maintained between 50~80 km/h. Impact of throttle usage on fuel consumption: For a new car, avoid pressing the throttle too hard to ensure that pistons, cylinders, and other critical components increase their load in a gentle state. This allows the parts to fully contact, friction, adapt, and set, adjusting and enhancing the ability of various car components to adapt to the environment while wearing down any protrusions on the parts. The quality of the car's break-in period will significantly impact its lifespan, safety, and fuel efficiency.
Was this review help?
2
1
Share
More Forum Discussions

What Should Novice Drivers Pay Attention to When Driving on the Road?

Here are the detailed instructions for novice drivers: Adjust the seat height: After sitting in the driver's seat, novice drivers should carefully observe and adjust their seat height to ensure a comfortable driving environment. The seat height should also allow them to see the road conditions and situations outside through the front windshield. Bring relevant documents: Bring personal documents such as a driver's license, ID card, vehicle inspection certificate, and other driving-related documents to ensure preparedness for any emergencies while driving. Familiarize with vehicle properties: Before driving, it is essential to familiarize yourself with the specific positions of the accelerator and brake, as well as the correct usage methods. Fasten the seatbelt to prevent mistakenly pressing the accelerator instead of the brake during driving, which could lead to unnecessary losses. Maintain a safe distance: During driving, always pay attention to maintaining a safe distance from other vehicles. Slow down and honk when turning or in crowded areas to ensure safety throughout the driving process.
19
3
Share

What are the types of brake fluid?

Brake fluid, also known as automotive brake fluid, comes in three types: alcohol-based, mineral oil-based, and synthetic. Below is a detailed introduction to brake fluid: Alcohol-based: There are two grades: No. 1 and No. 3. Mineral oil-based: There are two grades: No. 10 and No. 15. Synthetic: Currently, the most widely used is synthetic brake fluid, which is further divided into three main types: glycol-ether-based, ester-based, and silicone-based. However, the most commonly used are glycol-ether-based and ester-based. Function of brake fluid: The role of brake fluid is to transmit braking pressure. High-quality brake fluid ensures both vehicle safety and the personal safety of drivers and passengers in emergency situations.
11
2
Share

Should the Snow on the Car Be Cleaned?

If the car is covered with snow, it is necessary to clean the snow. The following are the hazards of snow on the car: Affects driving visibility: Uncleared snow can obstruct the driver's view. If the windshield is covered with snow, it will be impossible to see the road ahead. Additionally, excessive snow on the car can cause the windows and spray nozzles to freeze, affecting their functionality. Causes the vehicle to lose its luster: Snow contains corrosive substances such as alkaline, salt, or acidic materials, which can damage the car's paint and cause the glossy finish to lose its shine. In areas with poor air quality, the damage may be even more severe. Therefore, it is essential to clean the snow off the car promptly.
16
1
Share

What are the advantages of a V-type engine?

V-type engine refers to dividing all cylinders into two groups, arranging adjacent cylinders at a certain angle so that the two groups of cylinders form two planes with an angle between them. Viewed from the side, the cylinders appear in a V-shape, hence the name V-type engine. Its advantages are as follows: 1. Stable operation (for V6, V8, V12) and space-saving. 2. Small height and length dimensions, making it easier to arrange in a car. The lower height can reduce the height of the engine hood and lower wind resistance. The shorter length can leave more space for the passenger compartment. The cylinders are staggered in arrangement, which facilitates increasing displacement and power by expanding the cylinder diameter and is suitable for a higher number of cylinders.
19
0
Share

What is the normal temperature range for car engine coolant?

It is recommended that the car engine coolant temperature remains between 80-90℃ for optimal operation. Below are detailed explanations about car coolant temperature: Hazards of abnormal temperatures: Both excessively high and low coolant temperatures can damage the engine. Low temperatures impair engine lubrication, while high temperatures may cause engine self-ignition. The critical temperature limit is generally 105℃, at which point the coolant begins to boil, potentially leading to excessive pressure in the cooling system. If this pressure reaches a certain threshold, it may cause system rupture and explosion, with splashing coolant posing burn risks. While the engine can briefly withstand temperatures up to 100℃, prolonged operation at this temperature should be avoided. Drivers should regularly monitor the temperature warning light on the dashboard - if the red light illuminates, immediately pull over to allow the engine to cool down. Benefits of proper temperature: The engine's cooling system combines water-cooling and air-cooling mechanisms, which effectively dissipate heat when the coolant maintains normal operating temperature.
2
1
Share

How Long Is the Warranty for a Car Steering Gear?

Household automobile products can be replaced or returned free of charge within 60 days from the date the seller issues the purchase invoice or within 3,000 kilometers of driving mileage. Below are the specific details of the automobile three-guarantee policy: Three-Guarantee Coverage: The steering gear is included in the automobile's three-guarantee coverage, as it is part of the steering system. The main components of the steering system, braking system, suspension system, front/rear axle, and body are specified by the manufacturer in the three-guarantee certificate. Conditions for Free Replacement: If repairs have been performed twice for a severe safety performance failure and the issue remains unresolved or a new severe safety performance failure occurs; if the engine or transmission has been replaced twice, or if the same major component of the engine or transmission has been replaced twice due to quality issues and still cannot function properly (replacements of the engine/transmission and their major components are not counted repeatedly); or if the same major component of the steering system, braking system, suspension system, front/rear axle, or body has been replaced twice due to quality issues and still cannot function properly.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.