What is the actual fuel consumption of the Mondeo 1.5?

1 Answers
Bustamante
07/29/25 8:21pm
There are currently 2 models of the Mondeo 1.5T available for sale: the Luxury and Fashion models, both with a combined fuel consumption of 7.3L/100km. The above figure is the NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 9.63-12.03L/100km. Methods to reduce fuel consumption: Clean engine carbon deposits: Excessive engine carbon deposits are a significant cause, primarily due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaner when refueling. If the effect is not noticeable, it indicates a large amount of carbon deposits in the engine. In this case, the car must be taken to a 4S shop for professional cleaning of the carbon deposits by technicians. Check the oxygen sensor: As an internal control unit of the car, the oxygen sensor mainly monitors the fuel-air ratio of the engine. Once damaged, it will cause an imbalance in the fuel-air ratio, leading to a sudden increase in fuel consumption. When the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust during driving, and the sensor should be replaced immediately. Regularly replace the three filters: During vehicle use, the oil filter, air filter, and fuel filter must be replaced regularly. If not replaced for a long time, they become dirty and send incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits. Check the electronic control unit: Although the engine's electronic control unit is highly reliable, in older vehicles, various faults may inevitably occur.
Was this review help?
20
2
Share
More Forum Discussions

What is the difference between B5 diesel and No. 0 diesel?

The specific differences are as follows: Different sources: B5 diesel is made by blending waste "gutter oil" from the catering industry and sewer systems with ordinary diesel in a ratio of 5:95 after a series of biochemical reactions. No. 0 diesel is produced through processes such as direct distillation or cracking of crude oil and shale oil. Different environmental impacts: B5 biodiesel can reduce emissions of heavy metals and fine particulate matter by more than 10%, with a nitrogen oxide purification efficiency of up to 80%. No. 0 diesel contains more impurities and tends to produce more soot when burned, leading to air pollution. Different scales of use: B5 biodiesel is currently only used in small-scale applications in some cities, but its production and usage will continue to expand. No. 0 diesel is a type of ordinary diesel, and diesel vehicles mainly use the latter five grades of diesel. When the temperature is above 4°C, No. 0 diesel is selected, so it is currently widely used.
9
2
Share

Can A2 Driving License Use Study Method to Deduct Points?

Any driving license can use the study method to deduct points, with no restrictions on the type of driving license or the vehicle class permitted. According to Article 5 of the "Notice on the Issuance of the 'Regulations on the Reduction of Road Traffic Violation Points through Accepting Traffic Safety Education (Trial)'" issued by the Ministry of Public Security on January 14, 2020 (Public Traffic Management [2020] No. 14), motor vehicle drivers who apply to participate in traffic safety education to reduce traffic violation points must participate in corresponding road traffic safety laws, regulations, and related knowledge learning, examinations, or traffic safety public welfare activities according to their highest permitted vehicle class and meet the relevant requirements to apply for the reduction of traffic violation points. The study method to deduct points is a measure for drivers holding a driving license who have been penalized with points due to traffic violations. After participating in online traffic safety learning and passing the exam, their points can be reduced. This is a convenient traffic management measure uniformly deployed by the Traffic Management Bureau of the Ministry of Public Security. Specific precautions are as follows: Applicable groups: Motor vehicle drivers who hold a driving license of the People's Republic of China, regardless of the vehicle class permitted by the driving license or whether they are drivers of commercial vehicles, can participate in the study method to deduct points and must participate in corresponding road traffic safety laws, regulations, and related knowledge learning and examinations according to their highest permitted vehicle class. Specific rules: Motor vehicle drivers participating in online road traffic laws, regulations, and related content learning must study continuously for 5 minutes each time, accumulate 30 minutes of study time within 3 days, and then register for the exam within 7 days. Passing the exam can reduce 1 point. Drivers can also attend on-site learning, with each session lasting no less than 1 hour. After completing the required study hours, they can apply for the exam, and passing the exam can reduce 2 points. Drivers can also participate in offline traffic safety public welfare activities. Participating for one hour can reduce 1 point each time. Cases not accepted: The following situations will not be accepted: In the previous scoring cycle, the driver had two or more full-point records. Within three scoring cycles, the driver was involved in hit-and-run accidents, drunk driving, or the manufacture or alteration of documents or license plates. The motor vehicle driving license is in the probation period or has not been reviewed upon expiration. The driver has unresolved traffic violation records under their name. The driver has motor vehicles under their name with expired safety technical inspections or not deregistered as required. The driver has already reduced the maximum of 6 points in the current cycle.
14
0
Share

How often should a car undergo annual inspection?

For vehicles within 6 years, an annual inspection is required every 2 years. For vehicles over 6 years, an annual inspection is required every year. For vehicles over 15 years, an inspection is required every 6 months. Additional information: According to Article 16 of the "Regulations for the Implementation of the Road Traffic Safety Law," effective from July 1, 2018, motor vehicles must undergo safety technical inspections within the following periods from the date of registration: Passenger vehicles for commercial use: Within 5 years, an annual inspection is required every year; after 5 years, an inspection is required every 6 months. Trucks and large and medium-sized non-commercial vehicles: Within 10 years, an annual inspection is required every year; after 10 years, an inspection is required every 6 months. Small and mini non-commercial passenger vehicles: Within 6 years, an annual inspection is required every 2 years; after 6 years, an annual inspection is required every year; after 15 years, an inspection is required every 6 months. Motorcycles: Within 4 years, an annual inspection is required every 2 years; after 4 years, an annual inspection is required every year.
1
4
Share

Is Replacing the Valve Cover Gasket Considered a Major Overhaul?

Replacing the valve cover gasket is not considered a major overhaul. The valve cover gasket is a wear-prone component of the car, which may loosen or detach due to aging, leading to oil leakage from the valve cover. Therefore, it is essential to inspect the valve cover gasket regularly. Relevant information about car maintenance is as follows: Introduction: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain components of the car, also known as car servicing. Maintenance Scope: Modern car maintenance primarily includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and other related maintenance areas.
13
5
Share

Can you make a U-turn at a double solid line?

You cannot make a U-turn at an intersection with double solid lines. According to the notice, drivers can legally make a U-turn at intersections without no U-turn (left turn) signs or markings, regardless of whether the traffic light is red or green. Solid lines: Whether it is a single yellow line or a double yellow line, as long as it is a solid line, crossing is strictly prohibited, such as overtaking, turning, or making a U-turn. There should be no crossing of the line while driving unless under special circumstances. Dashed lines: Whether it is a single yellow line or a double yellow line, as long as it is a dashed line, you can overtake or make a U-turn when it is safe to do so. Yellow lines: Single yellow lines are generally used on roads with four or fewer lanes (including bicycle lanes), while double yellow lines are generally used on wider roads.
19
2
Share

Can I take the driver's license and motorcycle license tests together?

No. Regulations: According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses", you cannot apply for two types of driving licenses within one year. You can only take one of them first. After obtaining it, you must wait until the one-year probation period has passed, and there is no record of accumulating 12 penalty points during this year, before you can apply for an additional driving license to take the other test. You can only apply after one year: If you apply for a car license now, getting a motorcycle license will be a matter of more than a year later. To obtain a motorcycle license, you must first get your car license, and only after the car license has been valid for one full year can you apply for an additional motorcycle license at the county or district traffic police department. When applying for the additional license, you must bring your car license with you.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.