···
Log in / Register

What is the actual fuel consumption of the Camry 2.5?

3 Answers
LeAva
09/03/25 5:08am
The 2.5L model of the Camry has a fuel consumption of 8.7 liters per 100 kilometers. Relevant information is as follows: Engine: The Camry is a mid-size sedan under Toyota, equipped with two engines: a 2.0-liter naturally aspirated engine and a 2.5-liter naturally aspirated engine. The dimensions of the Camry are 4885 mm in length, 1840 mm in width, 1455 mm in height, with a wheelbase of 2825 mm. Power: The 2.0-liter naturally aspirated engine of the Camry delivers 178 horsepower and a maximum torque of 210 Nm. This engine reaches its maximum power at 6600 rpm and its maximum torque between 4400 to 5200 rpm. It features VVT-ie technology and hybrid injection system, and uses an aluminum alloy cylinder head and block.
Was this review help?
2
1
Share
McKennedy
09/15/25 6:40am
I've been driving a Camry 2.5L gasoline version for several years. In city traffic jams, the fuel consumption often surges to 8-9 liters per 100 kilometers, which is far from the official claim of 6-7 liters. On highways, maintaining a steady speed can bring it down to around 6 liters, which is quite fuel-efficient. There are many influencing factors: using the AC in summer adds over 1 liter, cold starts in winter also consume more fuel, and it's more noticeable on hilly roads. I've also noticed that low tire pressure increases rolling resistance, leading to an additional 0.5 to 1 liter of fuel consumption. Regular maintenance like replacing the air filter can help optimize fuel efficiency, avoiding the waste from frequent short trips. For long journeys, using cruise control can save a significant amount of money.
Was this review help?
6
3
Share
Expand All
MacHope
10/29/25 7:20am
As a car enthusiast, the fuel consumption of the Camry 2.5L varies by version: hybrid models actually consume 4-6 liters, while gasoline models consume 7-9 liters. Technically, hybrids save fuel in traffic by recovering energy, while gasoline engines rely on efficient direct injection to control emissions. Driving style has a significant impact, such as rapid acceleration increasing fuel consumption by 10-15%; low temperatures make it harder for the engine to warm up, leading to higher fuel consumption. Road conditions are also crucial, with frequent city traffic lights increasing fuel consumption, while smooth highways reduce it. Using low rolling resistance tires can reduce fuel consumption by about 0.5 liters, and it's recommended to maintain standard tire pressure. Keeping the ignition system well-maintained helps avoid malfunctions.
Was this review help?
10
2
Share
Expand All
More Forum Discussions

How to Install a Dash Cam?

Installation steps for a dash cam: Removal: Remove the rearview mirror casing; take off the rearview mirror by pressing down on the two metal tabs and sliding it downward to remove. Opening the casing: After disassembling the rearview mirror cable casing, unplug the connector for the anti-glare rearview mirror; disassemble the dash cam base, align the metal tabs on both sides of the dash cam base with the sliding grooves on the rain sensor base, and push upward evenly on both sides until it slides to the bottom. Connection: Connect the dash cam to the power source, then simply turn on the dash cam to use it. Dash cam: A dash cam is a device that records images, sounds, and related information during vehicle travel. After installation, it can record the entire process of driving, including video and audio, which can serve as evidence in traffic accidents.
17
4
Share

What to Do When the Car Battery Fails?

If the car battery fails and has been in use for a long time, consider replacing it; if it has been used for a short period, the issue may be resolved by repairing the battery. The normal lifespan of a car battery ranges between 1 to 8 years, largely depending on the vehicle's condition. With a properly functioning vehicle alternator recharging the battery and no electrical leakage or grounding issues, the battery can last over 3 years. The functions of the car battery include: 1. Providing power to the starting system, ignition system, and electronic fuel injection system when starting the engine; 2. Supplying power to the car's electrical devices when the engine is off or at low idle; 3. Assisting in powering electrical devices when the alternator's output is insufficient; 4. Mitigating voltage surges in the electrical system to protect the vehicle's electronic equipment; 5. Storing excess electricity generated by the alternator.
7
0
Share

What are the main components of the valve train assembly?

The main components of the valve train assembly are: valve timing gears, camshaft and its components, rocker shaft and rocker assembly, valve pushrod, valve, cylinder head, valve seat, valve guide, valve spring, valve lock piece and its components, and valve adjusting screw parts. The valve train assembly consists of all parts from the timing gear to those that actuate the valve movement, and its function is to drive the valves to open and close at the correct timing. The steps for cleaning the valves are: 1. Loosen the fastening screws of the air filter and throttle body; 2. Open the engine cover; 3. Remove the engine trim panel; 4. Remove the intake hose; 5. Remove the throttle body, block the intake passage, and then clean the throttle body; 6. After cleaning the throttle body thoroughly, add engine oil.
15
3
Share

Which country does Chery belong to?

Chery is a Chinese brand, and its models include: Tiggo 8, Tiggo 5x, Tiggo 3x, Tiggo 5e, Tiggo 7, etc. Taking the 2020 manual urban version Tiggo 8 as an example, it belongs to a mid-size SUV with body dimensions of: length 4700mm, width 1860mm, height 1746mm, wheelbase 2710mm, and curb weight 1509kg. The 2020 manual urban version Tiggo 8 has a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension. It is equipped with a 1.5L turbocharged engine with a maximum horsepower of 156PS, maximum power of 115kW, maximum torque of 230Nm, and is matched with a 6-speed manual transmission.
5
1
Share

Where is the fuel filter located in the Passat?

The fuel filter in the Passat is located 40 centimeters forward from the rear wheels at the bottom of the car. Its fuel filter is built-in and integrated with the fuel pump. Taking the 2020 Passat as an example, it is a mid-size sedan with body dimensions of: length 4933mm, width 1836mm, height 1469mm, wheelbase 2871mm, fuel tank capacity 68.5 liters, trunk capacity 521 liters, and curb weight 1470kg. The 2020 Passat is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
5
5
Share

What is the recommended tire pressure for ordinary cars?

For ordinary car tires, a pressure of 2.2 to 2.7 bar is recommended, with the standard tire pressure ranging between 2.4 to 2.5 bar. The hazards of excessive tire pressure are: 1. Reduced friction and adhesion of the tire, affecting braking performance; 2. Causes steering wheel vibration and deviation, reducing driving comfort; 3. Accelerates localized wear of the tread pattern in the center of the tire, shortening tire lifespan; 4. Increases vehicle vibration, indirectly affecting the lifespan of other components. The hazards of insufficient tire pressure are: 1. Increases the friction coefficient with the road surface; 2. Makes the steering wheel heavy and prone to deviation, which is detrimental to driving safety; 3. Increases the movement of various parts of the tire, causing abnormal heat due to excessive rolling.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.