What is the actual fuel consumption of the 2007 Accord 2.4?

1 Answers
SanSophia
07/30/25 8:05am
The 2007 Accord 2.4L has a total of 4 models, including the Accord 2007 2.4L Automatic Luxury Edition, Classic Edition, Automatic Comfort Edition, and Classic Edition. These models are equipped with a 170 horsepower engine, and their NEDC fuel consumption is 10.5L per 100 kilometers. The fuel tank capacity of the 2007 Accord 2.4L is 65L. The distance it can travel on a full tank of fuel is as follows: For models equipped with the 170 horsepower engine, the distance that can be traveled on a full tank of fuel is 65/10.5*100=619km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before reaching a red light can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the gasoline injected during a cold start does not atomize easily, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, in low temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
Was this review help?
2
0
Share
More Forum Discussions

Under What Circumstances Will the Clutch Cause the Engine to Stall?

Unfamiliarity with clutch control and releasing the clutch too quickly, leading to improper coordination between the clutch and brake, can easily cause the engine to stall. Below is a related introduction about stalling: Stalling at startup: After getting into the car, first adjust the seat properly. An improper sitting posture can also cause abnormal sensations while driving. If the legs cannot freely bend and stretch, controlling the throttle and clutch for a long time will be very tiring. When starting, the clutch must not be released too quickly. Press the clutch all the way down, shift into first gear, and slowly lift the clutch. When the clutch is in a semi-engaged state and the front of the car shakes, release the handbrake. Keep the left foot steady and do not move. Wait for the car to move for one or two seconds, then slowly release the clutch completely and accelerate to shift gears. Stalling during driving: Most of the time, when the car is in a different gear, suddenly pressing the brake all the way down to stop the car can cause the speed and gear to mismatch, resulting in stalling. The correct approach is to press the clutch all the way down first, then press the brake. When the car is about to stop, shift back to neutral and pull the handbrake.
7
0
Share

Where is the Volkswagen winter tire setting cancellation warning button located?

Volkswagen's winter tire speed warning cancellation button is located below the wiper lever. Here are specific methods for tire maintenance: 1. Regularly check tire pressure: Tire pressure is a crucial factor affecting tire lifespan. It should neither be too high nor too low; inflate according to the vehicle's indicated pressure. In summer, try to keep the pressure slightly lower. In winter, ensure the tire pressure is slightly higher than in summer due to thermal expansion and contraction. 2. Inspect wear conditions: Some vehicles may experience uneven tire wear. Frequently check the inner side of tires for abnormal wear, focusing on whether the tread depth is consistent on both sides. 3. Promptly remove foreign objects: Debris in tire treads poses potential hazards and can be ejected while driving. Keep tires as clean as possible. 4. Perform wheel alignment periodically: If the vehicle pulls to one side or exhibits abnormal steering, align the tires promptly to prevent further issues. Wheel alignment ensures even force distribution across all four tires, avoiding excessive wear.
3
4
Share

What are the differences between the Golf R-Line and the standard Golf?

Here are the main differences between the Golf R-Line and the standard Golf: 1. Powertrain: The Golf R-Line is equipped with the high-power version of the EA211 series 1.4T engine, delivering a maximum output of 150 horsepower (110KW), paired with either a 5-speed manual or 7-speed dual-clutch transmission. The standard Golf features the low-power version of the EA211 series 1.4T engine, also paired with a 5-speed manual or 7-speed dual-clutch transmission. 2. Headlights: The Golf R-Line comes with LED headlights, while the standard Golf (excluding the flagship and GTI versions) uses halogen headlights. The R-Line also features unique R-Line badges on the front grille and side panels. 3. Interior: The Golf R-Line boasts exclusive R-branded two-tone leather seats, an R logo on the steering wheel, chrome accents, paddle shifters, and metal brake and accelerator pedals, giving it a more sporty and youthful appearance. The dashboard is also more driver-oriented, providing a better wraparound feel. 4. Features: The Golf R-Line adds engine start-stop, keyless entry, front seat heating, LED lighting, automatic headlights, headlight washers, and an auto-dimming rearview mirror.
14
1
Share

Is Michelin City-Grip a Semi-Slick Tire?

Michelin City-Grip is a semi-slick tire. Below is an introduction to the differences between semi-slick tires and regular tires. Different Tire Properties: Semi-slick tires are defined in contrast to full-slick tires. The most notable feature of semi-slick tires is that they generate strong grip close to that of full-slick tires when the tire temperature rises due to high-speed friction, without picking up too much dust. Their wear rate is also within an acceptable range, which is one of the key differences between semi-slick tires and regular tires. Differences in Design: Regular tires are designed for daily use in household cars, with tread patterns optimized for water drainage, performing excellently on both dry and wet streets. Semi-slick tires, on the other hand, lean more toward sporty performance, featuring lower weight and a reduced aspect ratio to enhance wheel agility. Differences in Weight: The sidewalls of semi-slick tires are much stiffer than those of regular tires, improving their support. They incorporate high-tech fibers in their composition, making them lighter than regular tires. Differences in Contact Area: Semi-slick tires have larger tread blocks, increasing the tire's contact area with the road compared to regular tires. The larger contact area reduces tread deformation, and the stiffer sidewalls combined with a lower aspect ratio than regular tires allow drivers to better sense road conditions, resulting in more noticeable handling feedback.
19
5
Share

Should the position lights be kept on all the time?

When driving at night, the position lights need to be kept on. Here are the precautions for using car lights: When a motor vehicle passes through an intersection controlled by traffic lights and turns left, the turn signal should be turned on, and the low beam should be used when driving at night. When a following vehicle is driving close to the vehicle in front in the same direction, the high beam should not be used. When a motor vehicle passes through a sharp curve, slope, arch bridge, crosswalk, or an intersection without traffic light control at night, it should alternately use the high and low beams to signal. High and low beams: Both are used for nighttime illumination. The high beam can improve visibility and expand the field of view. On dark roads without streetlights, the visible range with the high beam on is much larger than with only the low beam on. The low beam is for close-range illumination, with a short irradiation distance and unadjustable focus, covering approximately 30-40 meters. On roads without a centerline: When meeting another vehicle at night, switch to the low beam at least 150 meters away from the oncoming vehicle. When meeting non-motorized vehicles on narrow roads or narrow bridges, use the low beam. If a motor vehicle breaks down or is involved in a traffic accident on the road, obstructing traffic and making it difficult to move, the hazard warning lights should be turned on as required, and a warning sign should be placed 50 to 100 meters behind the vehicle. At night, the position lights and rear position lights should also be turned on simultaneously.
11
2
Share

Can I claim insurance if my car is hit by a tree branch?

If your car is hit by a tree, you can claim insurance, and the insurance company will compensate for the damage. For example, if your car is parked by the roadside and is damaged by a tree, and you have comprehensive car insurance, the insurance company will cover up to 70% of the loss, while the remaining 30% will be compensated by the department responsible for the tree. If you do not have comprehensive car insurance, then the landscaping department will be responsible for 95% of the compensation. If a tree in a residential area damages your car and you have comprehensive car insurance, the insurance will cover 70% of the loss, and the remaining 30% will be compensated by the property management. If you do not have comprehensive car insurance, the compensation will be negotiated between the property management or the party responsible for the tree. Below is an introduction to comprehensive car insurance: 1. Introduction: Comprehensive car insurance refers to a type of commercial auto insurance where the insurance company compensates for damage to the insured vehicle caused by an insured accident while the vehicle is being used by the policyholder or an authorized driver, within reasonable limits. 2. Basic Coverage: Comprehensive car insurance and third-party liability insurance are the basic coverages for vehicle insurance, primarily compensating for the loss of the insured vehicle and the loss caused to a third party by the insured vehicle during use. It is generally believed that even losses caused by natural disasters will be covered by the insurance company. This statement is only half true, as most losses caused by natural disasters are indeed covered.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.